User Guide for RAEDIAN models including: NEX EV Charging Station, NEX EV, Charging Station, Station
File Info : application/pdf, 12 Pages, 3.83MB
DocumentDocumentQuick Guide NEX What's in the box X 2 X 1 Single Cable Gland X 1 Dual Cable Gland X 1 X 4 X 4 X 2 X 2 X 2 Tools suggestion 8mm Hexwrench 5mm Hexwrench 4mm Phillips Screwdriver Slotted Screwdriver Disclaimer The information in this document is subject to change without notice and should not be construed as a commitment by RAEDIAN. RAEDIAN assumes no responsibility for any errors that may appear in this document. 1 Preparing 1.1 Position and Power Entry 8mm A 1.2m B BOTTOM ENTRY C TOP ENTRY REAR ENTRY 1.2 Ethernet Cable Entry (Optional) X 1 A Slotted Screwdriver Power B Ethernet OR Hole Saw Cutter(M25) OR 2 Mounting 8mm X 4 50mm X 4 Phillips Screwdriver 8mm 3 Wiring 3.1 Power Cable Hexwrench 5mm OR X 1 Single Cable Gland X 1 BOTTOM ENTRY TOP ENTRY REAR ENTRY 1 Phase Connection 3 Phases Connection 16mm 16mm An external at least Type A RCBO according to IEC 61009 or RCCB according to IEC 61008 need to be installed in the upstream. Ensure the installation complies with all applicable laws and regulations 3.2.1 Ethernet Cable Entry (Optional) X 2 X 2 X 1 Dual Cable Gland A B C D E 3.2.2 Ethernet Cable Entry-Daisy Chain (Optional) A B C D 4 Installing Hexwrench 4mm A X 2 X 1 2 1 B C "Clip!" Be sure to be fastened Be sure to be fastened 5 Get Started 5.1 LED Indicators LED Status White Green 5.2 OLED Display Cyan Red Purple Definition Available Cable plugged in: Pending for authorization Waiting for EV Charging stopped by EV Charging in progress Fault state Paring RFID cards Booting V1.3.4 CS 0FA6B1B1 D 15/05/2024 T 11:48:28 READY 00,000.00 kWh Available Error Code OTA Faulted V1.3.4 CS 0FA6B1B1 D 15/05/2024 T 11:48:28 READY 00,000.00 kWh Available FW Version Checksum Date Time Accumulative Energy Delivered Charging E +000.000 kWh C 00:00:07 D 30/11/2023 T 08:43:34 1 229V 00/32A 00,000kW 00,000.00 kWh H Real-time Charging Power Accumulative Energy Delivered EV Connected Cable plugged in, waiting for authorization Charging Charging in progress Load Management H Home Balance activated H Waiting for grid capacity restored H! CT/SC Kit error Connectivity Wi-Fi BLE 4G (optional) LAN Schedule Energy Delivered(Current session) Charging Duration (Current session) Date Time Phase 1 1 Phase 3 3 Phase Voltage Real-time Charging Current/ Current Available S Solar Only activated S Waiting for surplus S! CT/SC Kit error E EMS connected E Unavailable E! EMS disconnected 6 Access 6.1 Plug And Charge (Default) 6.2 Authorization (Set In APP) A Paring with APP PIN Code:XXXX Product Code:EAXXXXXX Quick Guide PIN Start RAEDIAN APP B Authorized with RFID R E30A0/E81A:1V0D4/1Y32.Y:02P32.Y04321 00,000.00kWh 7 Accessories ECPC hub 80A/160A/250A Type A RCD, Type I+II SPD, IP65, MID metering ECPC unit 40A 1ph/3ph Type A RCD/Type B RCD +Type II SPD, IP65 Charging cable 7kW/22kW 5m/7.5m, Type 2 to Type 2 Comes with a carry bag Pedestal with roof For charging station mounting Wall bracket Safe and secure installation on uneven surfaces Operational RFID card Customization available For CMS portal, please scan the QR code or visit us: https://nebula.raedian.com For more information, please scan the QR code or visit us: https://raedian.com/support For instruction videos, please scan the QR code or visit us: @EVWallboxRaedian