Instructions for Use
AIRTAG NOT INCLUDED
Product Features
- Wide Application
- Waterproof (IPX8)
- Super Durable
Installation Guide
STEP 1.
Flush Mounted Bottom Cap
This is the base component of the holder.
STEP 2.
Place AirTag Logo Face Down
Insert the Apple AirTag into the bottom cap with the logo facing downwards. Ensure the metal side of the AirTag is facing down.
STEP 3.
Close the Cap
Place the top cap over the AirTag and bottom cap.
STEP 4.
Tighten the Four Flat Head Screws
Secure the top cap to the bottom cap using the provided flat head metal screws.
STEP 5.
Installation of the Pressure Strip
Choose between horizontal or vertical orientation for the pressure strip. Secure the strip using the pointed metal screws.