CEL-FI Antennas & Mounts - Nextivity
User Guide for NEXTIVITY models including: CEL-FI GO G41 Spark NZ Stationary Repeater, CEL-FI GO G41, Spark NZ Stationary Repeater, NZ Stationary Repeater, Stationary Repeater, Repeater
CEL-FI GO G41 Quick Start Guide *Included with certain kits only. Basic Functionality: The CEL-FI GO G41 connects to a Donor Antenna to receive signals from a chosen operator’s cellular network. It amplifies the signals through one or more server antennas for coverage where needed.
31 ott 2023 — Example Installation. Additional Information. REQUIRED HARDWARE. NOTE: The GO G41 package comes equipped with Mounting Screws and Drywall Anchors for mounting ...
File Info : application/pdf, 3 Pages, 912.38KB
DocumentDocumentCEL-FI® GO G41 Quick Start Guide Example Installation Server Port Donor Port How it Works: Enhances in-building cellular coverage. For kit options, antennas, or cables, contact distributor or visit www.nextivityinc.com. Basic Functionality: The CEL-FI GO G41 connects to a Donor Antenna to receive signals from a chosen operator's cellular network. It amplifies the signals through one or more server antennas for coverage where needed. The donor antenna is placed where there is a strong signal, preferably outdoors and positioned high. A cable splitter can connect additional server antennas for wider coverage. The WAVE App for smartphones and tablets is used to select the operator, help aim the donor antenna, and monitor performance. Included in the Box (Antennas & Cabling Sold Separately) GO G41 AC Adapter Mounting Screws (4) Drywall Anchors (4) *Included with certain kits only. Additional Information SAFETY: Please use proper safety measures when working on a ladder, lift, or roof REQUIRED HARDWARE NOTE: The GO G41 package comes equipped with Mounting Screws and Drywall Anchors for mounting to standard drywall. Before installing, ensure there are no wires, other objects, or metal plates behind the drywall that may interfere with the anchors, screws, or mounted units. Soft-Install Option: Before permanently mounting system components, temporarily place the antennas, GO G41, and cables, allowing for changes while optimizing the set up using WAVE App guidance. Longer cables or different antennas may be available from your supplier, if needed. Quick Installation IMPORTANT: Your CEL-FI GO G41 is electronic equipment. The CEL-FI GO G41 must be kept indoors and in a dry, cool, well ventilated area. 1 X Select Donor Antenna Location Using a cellphone for the operator you wish to boost, find a donor antenna location with the best signal quality. Phone signal bars and Internet speed tests work great (disable Wi-Fi when testing). Outdoors, higher up, and away from the server antenna is best. Test on different sides of the building, or consider an attic, upper window, or room with good service. Then install the donor antenna there. 3 Mount the GO G41 & Connect Cables 2 Select Server Antenna Location Install the server antenna where service is needed. This is typically a ceiling antenna or panel antenna laying face down on the ceiling drywall. Choose an open area for best propagation, far from the donor antenna. In larger spaces, use a splitter with low loss cable to feed multiple server antennas. Make sure both antenna cables will reach the GO G41 mounting location in the next step, or consider longer cables. 4 Connect the GO G41 to Power Mount the GO G41 where power is available, using the supplied Drywall Anchors and Mounting Screws. Connect the donor and server antenna cables to the correct ports. Lightly torque the antenna cable connectors with a small wrench. Damage may result if over-tightened. Waterproof exterior connections and cable. Connect the DC Power Cable into the GO G41 and secure it with power cable clamp. Plug in the AC Adapter. The Status LEDs on the GO G41 will begin to blink. Power cable clamp DC power cable 5 Commission with the WAVE App Download the WAVE App and allow it to connect to the GO G41. Follow the guided steps to set up the system, aim the donor antenna, resolve alarms, and optimize performance. Scan to Download: The WAVE App is available for smartphones and tablets. Advanced Installation For best results, separate the Donor and Server Antenna(s) as much as possible. Antenna separation (isolation) can be achieved with either physical distance or walls and floors between the antennas. Make sure any cables, splitters, and antennas used in the system are properly matched. (CEL-FI GO G41 is rated for 50 ) Many system configurations are possible, with up to four server antennas per GO G41 using low loss coaxial cable. Please Note: The LAN port on the GO G41 is for certified professional installers only. Exernal Antenna Splitting Server Antenna Antenna Kitting: The following antennas are authorized to be used with GO G41: Wideband Directional Antenna Wideband Panel Antenna Whip Antenna Multi-Story Indoor Omni Antenna LP SISO Indoor Omni Antenna A32-V32-200 A52-V32-100 A21-100-100 Donor Antenna Server Antenna Additional Nextivity authorized antennas are available at: https://nextivityinc.com/antennas/ A11-V43-100 A11-H43-201 User Interface LED and LAN LED to indicate status. LED Solid GREEN Blinking GREEN Blinking REDORANGE Blinking or Solid RED LED OFF LED Solid GREEN Blinking GREEN Blinking RED LED OFF MEANING The unit is working and boosting properly. Unit is scanning for networks to boost. Start-up sequence. The unit is in an error condition. Use the WAVE App to check the error meaning and remedy. No power. MEANING Connected with IP address. Physical link up, no IP address. Physical connection, error condition. No connection. Troubleshooting ISSUE ACTION Unit cannot find a signal to boost (PWR LED blinks GREEN for over 10 minutes). · Check the WAVE App for error messages, and check that an operator has been selected in Settings. Check donor antenna, cable, connections, and aim antenna. You may have to wait up to one hour if the unit is powering up for the first time. WAVE App will not connect to the GO G41. · Make sure Bluetooth is enabled on your phone. Restart Bluetooth. Reinstall/retry WAVE App. No LAN activity · The LAN port is only available to certified installers with WAVE Portal access. All other issues · Unplug and reinsert power. · Connect WAVE App for guidence. qsg-go-g41_1-3-5-28L_eng_23-1026 Copyright © 2023 by Nextivity, Inc., U.S. Patents pending. All rights reserved. The Nextivity and CEL-FI logos are registered trademarks of Nextivity, Inc. All other trademarks or registered trademarks listed belong to their respective owners. Designed by Nextivity, Inc. in California.