Whisper Latch
Part#: 2319X-XX
INSTALLATION INSTRUCTIONS
PARTS/TOOLS NEEDED:
| Item | Description |
|---|---|
| Whisper Latch Assembly | Image shows the Whisper Latch assembly components: the latch mechanism, a mounting bracket, screws, and a round knob. |
| 1" Spade Bit | Image shows a 1-inch spade drill bit. (Not Provided) |
| Power Drill | Image shows a power drill. (Not Provided) |
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
- ⚠️ Disconnect power before installing, adding or changing any component.
- ? To avoid a hazard to children, account for all parts and destroy all packing materials.
- ⚡ It is recommended that fuse protection be added to the positive (+) input.
- ? Note: The 23199 (shown above) will contain a self latching lever that holds the door in place even when the lock is not engaged. The 23190 and 23193 do not include this lever.
Installation Steps:
- Determine the installation location and drill a 1" hole using a spade bit. Mark the location for the mounting screws and pre-drill. Insert the round collar into the hole.
Image shows a circular hole drilled into a wooden surface.
Image shows a round metal collar inserted into the drilled hole.
- Push the round knob through the hole and attach the latch assembly with the black shim to the door using the screws provided.
Image shows the back of a wooden surface with screw holes marked for the latch assembly.
Image shows the Whisper Latch assembly mounted to the wooden surface with screws, including a beige shim.
- Determine the installation location for the latch. Mark the location and secure the latch via screws.
Image shows screw holes marked on a wooden surface for the latch strike plate.
Image shows the latch strike plate mounted to the wooden surface with screws.
- Push the switch to ensure latch is in working order.
Image shows the exterior of a door with the round knob installed.
Image shows the round knob turned, indicating the latch mechanism is engaged.
ITC Warranty & Return Policy
