STEINEL L 30 S / L 30 Quick Start Guide
Service and Installation Information
Contact: STEINEL Vertrieb GmbH
Dieselstraße 80-84, 33442 Herzebrock-Clarholz, Germany
Phone: ? +49 5245-448-188
Email: ✉️ service@steinel.de
Website: www.steinel.de
Full Manual: steinel.de/110087768.pdf
Find Local Service: steinel.de/contact
Product Overview
This document provides a quick start guide for the STEINEL L 30 S and L 30 outdoor lighting fixtures, featuring motion sensor technology. The product is designed for efficient and reliable outdoor illumination.
Installation Guide
Follow these steps for installation. Ensure power is disconnected before starting.
-
Step 1: Mounting the Base
Attach the mounting bracket to the wall using appropriate screws. The diagram shows a drill bit (⌀ 6 mm) being used for pilot holes.
-
Step 2: Wiring Connections
Connect the power supply wires to the terminal block inside the fixture. The diagram shows a screwdriver (?) being used to secure wire connections. Terminal labels are typically L (Live), N (Neutral), and PE (Ground).
Wire Colors:
- N: blau / blue
- L: schwarz, braun, grau / black, brown, grey
- PE: grün-gelb / green-yellow
-
Step 3: Attaching the Fixture
Mount the main body of the light fixture onto the installed bracket. The diagram shows the fixture being clicked or screwed into place.
-
Step 4: Final Adjustments
Adjust the sensor angle and position as needed. The diagram shows the fixture being positioned on the bracket.
-
Step 5: Sensor Settings
5a: Shows the sensor head being adjusted.
5b: Illustrates the sensor's detection range and angle. The diagram shows a person icon (?) with wavy lines (〰️) emanating from the sensor, indicating detection.
-
Step 6: Power Connection (Internal)
Connect the mains power to the internal terminal block. The diagram shows the terminal block with L, N, and PE connections, and a maximum power rating of 15W.
-
Step 7: Light Source Replacement
The diagram indicates that the light source (bulb ?) is interchangeable. It specifies a maximum of 15W for an E27 socket.
-
Step 8: Final Assembly
The diagram shows the final assembly of the light fixture, including attaching any covers or decorative elements.
-
Step 9: Sensor Operation
Illustrates the sensor detecting motion, shown by wavy lines (〰️) emanating from the sensor towards a person icon (?).
Technical Data
The following technical specifications are provided for the STEINEL L 30 S and L 30 models.
| Specification | L 30 S / L 30 |
|---|---|
| Dimensions (H x W x D) | 261 x 122 x 108 mm |
| Power Supply | 220-240 V, 50/60 Hz |
| Output (Max Bulb Wattage) | max. 15 W / E27 |
| Optimal Mounting Height | 2 m |
| Angle of Coverage | 180° |
| Sensor Reach | max. 10 m |
| Twilight Setting (Light Sensitivity) | 2-2,000 lux |
| Time Setting (Duration) | 8 s - 35 min |
| IP Rating | IP 44 |
| Ambient Temperature Range | -20 to +40°C |
| Protection Class | II |
| Impact Resistance | IK 07 |
Declaration of Conformity
STEINEL Vertrieb GmbH declares that the radio equipment type L 30 S / L 30 complies with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at:
International | STEINEL
