SPARE PARTS MANUAL
FLEXTOOL DRIVE UNIT FDU-P1 (STANDARD)
Version 3.0 (February 2023)
For more information contact Flextool on 1300 353 986 or visit flextool.com.au
Flextool Drive Unit FDU-P1 Components
| Item No. | Product Code | Description | Qty | Remarks |
|---|---|---|---|---|
| 1 | NPS01577-UNIT | FLX DRIVE UNIT FRAME FDU-P1 (CNVR1-001) | 1 | |
| 2 | NPS01628-UNIT | HON ENGINE GX160 QX (CNVR1-002) | 1 | |
| 3 | See Remarks | FLX NYLOCK NUT (CNVR1-003) | 4 | Use SK-1 |
| 4 | See Remarks | FLX WASHER (CNVR1-004) | 4 | Use SK-1 |
| 5 | See Remarks | FLX BOLT (CNVR1-005) | 4 | Use SK-1 |
| 6 | See Remarks | FLX SPACER (CNVR1-006) | 1 | Use SK-2 |
| 7 | NPS00779-UNIT | FLX KEY (CNVR1-007) | 1 | |
| 8 | See Remarks | FLX GRUB SCREW (CNVR1-008) | 2 | Use SK-2 |
| 9 | See Remarks | FLX DRIVE DOG (CNVR1-009) | 1 | Use SK-2 |
| 10 | NPS02891-UNIT | FLX LIFTING HOOK (CNVR3-010) | 1 | |
| 11 | See Remarks | FLX ROLL PIN (CNVR1-011) | 1 | Use AS-1 or SK-3 |
| 12 | See Remarks | FLX BELL HOUSING (CNVR1-012) | 1 | Use AS-1 |
| 13 | See Remarks | FLX TRIGGER SPRING (CNVR1-013) | 1 | Use AS-1 or SK-3 |
| 14 | See Remarks | FLX TRIGGER (CNVR1-014) | 1 | Use AS-1 or SK-3 |
| 15 | NPS01581-UNIT | FLX SOCKET HEAD CAP SCREW (CNVR3-015) | 4 |
Assembly / Service Kits
| Item No. | Product Code | Description | Qty | Remarks |
|---|---|---|---|---|
| AS-1 | NPS03374-UNIT | FLX ASSY BELL HOUSING (CNVR3-017) | 1 | Inc Items: 11, 12, 13, 14 |
| SK-1 | NPS01582-UNIT | FLX SERVICE KIT BOLT SET FDU (CNVR3-018) | 1 | Inc Items: 3, 4, 5 |
| SK-2 | NPS07161-UNIT | FLX SERVICE KIT DRIVE DOG GX160-QX (CNVR3-016) | 1 | Inc Items: 6, 8, 9 |
| SK-3 | NPS07159-UNIT | FLX SERVICE KIT TRIGGER (CNVR3-019) | 1 | Inc Items: 11, 13, 14 |
Contact Information
Parchem Construction Supplies Pty Ltd
1956 Dandenong Road, Clayton VIC 3168, Australia
Phone: 1300 353 986
Website: flextool.com.au
ABN: 80069961968
Disclaimer
This manual summarizes Flextool's best knowledge of the product based on available information at the time of publication. Users should read this manual carefully and consider the information in the context of how the product will be used. Flextool's responsibility for products sold is subject to its standard terms and conditions of sale.
Any advice, recommendation, information, assistance, or service provided in this manual is given in good faith and is believed to be appropriate and reliable. However, this is provided without liability or responsibility, except where such exclusion, limitation, or modification is prohibited by Commonwealth, State, or Territory law.
The product is expected to perform as indicated in this manual, provided that operation and operational procedures are followed as recommended.
Design and technical specifications are subject to change.
© This publication is copyright. All rights are reserved. Flextool is a registered trademark of Parchem Construction Supplies Pty Ltd.
flextool.com
Concrete Equipment and Tools - From Site Preparation to Surface Preparation | Flextool
