User Manual

Getting Started

Power Key: Long press to turn on/off; short press to turn on the screen.

Charging: Ensure the equipment is fully charged before first use. If the equipment is not used for a long time, please ensure that it is charged every three months. The charging indicator shows a red light when charging and turns green when fully charged.

Device Interface Navigation:

• Slide right to access the function list.
• Slide left to access the function interface.

System Requirements: Android 8.0+ and iOS 10.0+.

APP Connection

Download: Scan the QR code or search for "GloryFit" to download the app.

Connection Steps:

1. Turn on Bluetooth on your mobile device.
2. Open the GloryFit app.
3. Select your device to add in the scan list.
4. Connection successful.

Function Introduction

Control Center

Accessed by sliding down from the home screen. Includes Mute, Brightness Adjustment, Find your phone, and Settings.

Movement Data

Displays steps, distance, and calories. You can set a daily goal for your activity.

Heart Rate

Enter the heart rate interface. The green light at the bottom will illuminate, and testing will begin.

Sports

Options for multi-sport modes include Outdoor running, Cycling, Skipping, Badminton, Walking, Yoga, and Baseball.

Breathing Training

Enter the breathing interface, select the desired time and speed, and follow the on-screen prompts.

Music

Control music playback on your connected mobile device.

Female Health

Track menstrual cycles and related data after enabling the feature in the app.

Sleep

The device automatically records sleep data. After connecting to the app and syncing, you can view detailed sleep analysis for the past days. The device recalculates data at the start of a new day.

Weather

After connecting your watch with the app and enabling location permissions, the watch will display the current weather information.

Blood Oxygen

Enter the interface for blood oxygen measurement. The red light at the bottom will illuminate, and testing will begin.

Blood Pressure

Switch to the blood pressure measurement interface. The device will automatically measure blood pressure, which takes about 30 to 60 seconds.

Information

After connecting your watch with the app and enabling information push, incoming calls, SMS, and other messages will be displayed on the watch.

Important Precautions

Water Resistance: Do not wear this product for bathing, swimming, diving, or other water-related activities to avoid damage caused by water.

Temperature: Do not subject the equipment and its accessories to high temperatures or place them in a microwave or near a fire.

Impact: Avoid dropping, impacting, or vibrating the equipment.

Maintenance: Keep the equipment and accessories dry. Do not disassemble the machine by non-professionals.

Power: Do not use the equipment in a low-power state. Ensure the battery is charged regularly.

Children/Animals: Do not allow children or animals to chew or swallow the equipment or its accessories.

Cleaning: Use a dry cloth to clean the equipment. Ensure the charging contacts are clean and dry.

Accuracy: All health data provided by the device is for reference only and not intended for medical diagnosis.

FCC Compliance Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Important: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.