Installation Guide for Sikasil models including: W-02-38, W-02-37, WS-605S High Performance Weather Sealant, WS-605S, High Performance Weather Sealant, Performance Weather Sealant, Weather Sealant, Sealant
SEAL INSTALLATION INSTRUCTIONS While the modules are being installed on the carport, you can proceed with the installation of the sealing system. The surface must be cleaned, degreased and dried. The expansion cord(W-02-38) should be placed between the module frames in such a way that Sikasil WS-605S sealant (W-02-37) is 2.5mm at each point and fills the gap between the modules and slightly overlaps the module frame. In places where there are center glues, the cord should be undercut in such a way as to fit it properly. NOTE: It is important to make sure that the installation of the sealant is carried out on days free from precipitation, and that it does not occur within 72 hours after the installation of the sealant. During drying, do not cover the compound with additional protection from precipitation, as it must have access to oxygen. 02.10.2024Microsoft Word dla Microsoft 365