Manuals+

Ubiquiti USW-Pro-Max-24-PoE: Safety, Electrical Information, and Declaration of Conformity

Installation Guide

The following are key steps or components for installation:

  • Item 1
  • Item 2
  • Item 3

Note: Visual aids for installation are not provided in this text-based format.

Safety Notices

  • Read, follow, and keep these instructions.
  • Heed all warnings.
  • Only use attachments/accessories specified by the manufacturer.
  • WARNING: Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow.
  • WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
  • WARNING: Do not use this product in a location that can be submerged by water.
  • WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
  • WARNING: Use only IEC/EN 60825-1:2014 Class I SFP Modules, and for safety ensure not to look directly into fiber cable ends.

Electrical Safety Information

  • Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment, or pose a fire hazard if the limitations are not followed.
  • There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.
  • This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet.
    • Do not substitute the power cord with one that is not the provided approved type. Never use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.
    • The equipment requires the use of the ground wire as a part of the safety certification; modification or misuse can provide a shock hazard that can result in serious injury or death.
    • Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment.
    • Protective earthing is provided by Listed AC adapter. Building installation shall provide appropriate short-circuit backup protection.
    • Protective bonding must be installed in accordance with local national wiring rules and regulations.
  • The product is used in Restricted Access Areas.

Declaration of Conformity

Hereby, UBIQUITI, declares that this device, USW-Pro-Max-24-PoE, is in compliance with the essential requirements and other relevant provisions of Directives 2014/30/EU, 2014/35/EU.

The full text of the EU declaration of conformity and detailed compliance information is available at the following internet address: ui.com/compliance

Ubiquiti International Holding B.V.
Ekkersrijt 3102, Son, Netherlands

Models: USW-Pro-Max-24-PoE, USW-Pro-Max-24-PoE Etherlighting Switch, Etherlighting Switch, Switch

File Info : application/pdf, 2 Pages, 1.11MB

PDF preview unavailable. Download the PDF instead.

USW-Pro-Max-24-PoE Insert

References

Adobe PDF library 17.00 Adobe Illustrator(R) 24.0

Related Documents

Preview UniFi Switch Enterprise 8 PoE: 2.5GbE Managed L3 Switch Specifications
Detailed specifications for the Ubiquiti UniFi Switch Enterprise 8 PoE, a managed Layer 3 switch featuring 8 x 2.5GbE PoE+ ports and 2 x 10GbE SFP+ uplinks, ideal for Wi-Fi 6 APs and high-speed networking.
Preview Ubiquiti UniFi Switch Pro Max 48 PoE Safety and Compliance Information
This document provides essential safety notices, electrical safety information, and the Declaration of Conformity for the Ubiquiti UniFi Switch Pro Max 48 PoE (USW-Pro-Max-48-PoE). It covers warnings regarding ventilation, exposure to elements, and proper usage, along with electrical safety guidelines and compliance statements for EU and UK regulations.
Preview Ubiquiti UniFi Pro Max 48 PoE Switch (USW-Pro-Max-48-PoE) Technical Specifications
Detailed technical specifications for the Ubiquiti UniFi Pro Max 48 PoE Switch (USW-Pro-Max-48-PoE), covering its mechanical, hardware, switching features, and Etherlighting capabilities.
Preview Ubiquiti UniFi Network Enterprise 48 PoE Quick Installation Guide
A quick guide to installing and connecting the Ubiquiti UniFi Network Enterprise 48 PoE switch, detailing hardware setup, rack mounting, and network configuration via the UniFi Network application.
Preview Ubiquiti UniFi Pro Max 16 PoE Installation Guide
Installation guide for the Ubiquiti UniFi Pro Max 16 PoE, a Layer 3 managed switch with 16 Gigabit Ethernet ports.
Preview Ubiquiti UniFi Pro Max 48 PoE Switch Installation Guide
Comprehensive installation guide for the Ubiquiti UniFi Pro Max 48 PoE switch, covering hardware setup, rack mounting, and initial connection.
Preview Ubiquiti UniFi USW-24-POE Quick Start Guide
This guide provides instructions for setting up and installing the Ubiquiti UniFi USW-24-POE switch, including hardware overview, installation requirements, connecting Ethernet and SFP, software installation, and adoption process.
Preview Ubiquiti UniFi Switch USW-Pro-24-POE Quick Start Guide
A quick start guide for the Ubiquiti UniFi Switch USW-Pro-24-POE, covering package contents, system requirements, hardware description, installation, power and ethernet connections, SFP connections, software installation, and specifications.