Important Safety Information
Please note the installation of the product is intended to be undertaken by an adequately trained and experienced person. You are installing the product at your own risk. If you are not properly trained or experienced or feel unsure about the installation procedure, please refrain from installing the product yourself and contact EK Water Blocks tech support for assistance. EK Water Blocks disclaims liability for any damages to the product as well as incidental, consequential, or indirect damages incurred due to improper or inappropriate installation.
Before you start using this product, please follow these basic guidelines: Please carefully read the manual before beginning the installation process.
Box Contents
The package includes:
- EK-Quantum Velocity² ILM Replacement – 1700
- Allen Key 2 mm (1 pc)
- Allen Key 2.5 mm (1 pc)
- TX20 L-Shaped wrench (1 pc)
- Thermal grease (1 pc)
ILM Replacement Dimensions
The ILM replacement part has the following dimensions:
- Overall Width/Height: 90 mm
- Distance between mounting holes: 78 mm
- Inner hole spacing: 36 mm
- Thickness: 14 mm
- Profile height: 6 mm
- Inner dimension: 59.7 mm
Diagram Description: A top-down view shows a square-like shape with rounded corners and four mounting points. A side view illustrates the thickness and profile.
Technical Specifications and ILM Replacement Parts
Technical Specification:
Dimensions (L x H x W): 90x90x14 mm
| Position | Description | Quantity |
|---|---|---|
| 1 | Velocity² ILM Replacement Backplate | 1 |
| 2 | ILM Replacement Die Guard | 1 |
| 3 | EK RGB Badge | 1 |
| 4 | Velocity² Mounting Nut | 4 |
| 5 | Velocity² - Spring Steel | 4 |
| 6 | M3 x 12 DIN7991 Screw | 4 |
| 7 | Velocity² Naked Backplate Protective Sticker | 1 |
Diagram Description: An exploded view illustrates the assembly of the ILM replacement parts, showing the backplate, die guard, nuts, springs, screws, and badge.
Installation Guide
Removing the CPU Block
Step 1: Remove the EK-Velocity² CPU block from the motherboard by unscrewing the backplate screws on the back of the motherboard. Use the Allen Key 2.5 mm.
Diagram Description: Shows the CPU block being detached from the motherboard. A second diagram illustrates the backplate and its mounting points.
Preparing the Motherboard
Step 1: If the CPU is installed, remove it from the socket.
Diagram Description: Illustrates the CPU being carefully removed from its socket.
Step 2: Remove the stock Torx screws from the motherboard. Use the TX20 Key.
Diagram Description: Shows the removal of existing screws from the motherboard's stock mounting hardware.
Step 3: Remove the stock mounting bracket from the motherboard.
Diagram Description: Illustrates the removal of the original CPU cooler mounting bracket.
Step 4: Install the CPU in the socket.
Diagram Description: Shows the CPU being correctly placed into the motherboard socket.
Step 5: Wipe the IHS (Integrated Heat Spreader) clean using a non-abrasive cloth or a q-tip.
Diagram Description: Depicts the CPU's IHS being cleaned with a soft cloth.
Installing the ILM Die Guard
Step 1: Place the DIE GUARD on the motherboard, ensuring the holes are aligned. On the back of the motherboard, place the BACKPLATE. Secure the backplate with four (4) M3 x 12 DIN7991 Screws.
Diagram Description: Shows the Die Guard being positioned on the motherboard and the backplate being attached from behind, secured by screws.
Step 2: Now you can install the Velocity² CPU block. Follow the installation manual provided by EK Water Blocks for the final mounting steps: EK-Quantum Velocity² Installation Manual.
Support and Service
For assistance, please contact EK Water Blocks customer support:
Social Media
Connect with EK Water Blocks:
- Facebook: EKWaterBlocks
- Twitter: @EKWaterBlocks
- Instagram: ekwaterblocks
- YouTube: EKWBofficial
- Pinterest: ekwaterblocks
