Releases · WestBerryVIA/via-releases · GitHub
User Manual for CIDOO models including: Nebula 65 VIA Tri Mode Mechanical Keyboard, Nebula, 65 VIA Tri Mode Mechanical Keyboard, VIA Tri Mode Mechanical Keyboard, Tri Mode Mechanical Keyboard, Mechanical Keyboard, Keyboard
CIDOO Nebula Manual
File Info : application/pdf, 1 Pages, 6.29MB
DocumentDocumentCIDOO Nebula
FN+:
FN+:
FN+{:
FN+} :
FN+ENTER :/
FN+\| :
FN+ :
FN+ :
FN+ ;: :
FN+ '" :
FN+ Backspace: FN+ Backspace
FN+SPACE:1010%~100%
FN+1: F1
FN+2: F2
FN+3: F3
FN+4: F4
FN+5: F5
FN+6: F6
FN+7: F7
FN+8: F8
FN+9: F9
FN+0: F10
FN+-_: F11
FN+ =+: F12
FN+Esc : `
FN+I: PRTSC
FN+O: SCROLL LOCK
FN+P: PAUSE
FN+DEL: INSERT
FN+PG UP:HOME
FN+PG DN:END
FN+WIN: WIN
Windows and MAC OS
Windows MAC
/5.0/ 2.4G
USBUSB RGB
:
1.CIDOO Nebula 3. BT . FN + Q FN + W FN + E 3-5 . . 2.FN + Q CIDOO Nebula -1FN + WCIDOO Nebula -2FN + E CIDOO Nebula -3 3. 3SFN+QFN+W FN+E
CIDOO Nebula
2.4G: 2.4GUSB R3S2.4G
2.4G 2.4G. FN+R 3~5"R"USB"R" RGB
2.4G5 30
RGB 3.5VFN FN FN CIDOO Nebula 2.4GVIA VIA : 1.https://github.com/WestBerryVIA/via-releases/releases VIA .
2.CIDOO CIDOO Nebula 2.4G.JSON CIDOO Nebula USB.JSONVIA USB JSON 2.4G JSON2.4G
3.VIA.
VIA VIA VIA VIA. CIDOO Nebula VIA .
CIDOO Nebula 0-34 . . QMK CIDOO Nebula RGB . CIDOO Nebula CIDOO Nebula0-3 0WinWIN ,0 0MacMAC ,0Left Alt=Left Option Left Win=Left Command Right Alt= Right Option
1Win/MacFn1(3)1
2Win/MacVIA MO(2)MO(2)2
3Win/MacVIA MO(3)MO(3)3
Hue+
RGB Md+ RGB
Win...
Windows
Hue-
BT 1
1
BT 3
3
Lock Win Windows
Brght-
Fn1(3) Fn1(3),1
MO(3) MO(3),3
Sat+ RGB Tog... Mac... SatBT 2 Brght+ RGB SPD RGB SPI MO(2)
+ / Mac 2 RGB RGB MO(2),2
65% VIA Tri-mode Mechanical Keyboard
minimalistic design inheriting the originality style THIS IS EXACTLY WHAT I LIKE THANK YOU
Thank you for purchasing our CIDOO NEBULA mechanical keyboard , We hope you will be pleased with both the product and service you received . The following is detailed introduction of the functions and operation method of this product.
Default Hot Keys Hold FN + listed keys to activate
LED keys
FN+: LED backlight brightness Increase FN+: LED backlight brightness decrease FN+{}: LED backlight speed decrease FN+} ~: LED backlight speed increase FN+ENTER :Turn off/on the backlight FN+\|: Toggle LED backlight mode FN+ : LED backlight hue increase FN+ : LED backlight hue decrease FN+ ;:}: LED backlight saturation increase FN+'" : LED backlight saturation decrease FN+ Backspace: Long press FN+ Backspace for 3 seconds to reset the
keyboard to the factory setting.
Media Keys FN+1: F1 FN+3: F3 FN+5: F5 FN+7: F7 FN+9: F9 FN+-_: F11 FN+ Esc : ` FN+O: SCROLL LOCK FN+DEL: INSERT FN+PG DN:END
Windows and MAC OS
FN+2: F2 FN+4: F4 FN+6: F6 FN+8: F8 FN+0: F10 FN+ =+: F12 FN+I: PRTSC FN+P: PAUSE FN+PG UP:HOME FN+WIN: WIN lock
Toggle switch at the back of the keyboard
Battery Checking
FN+SPACE: Battery level indicator .From !1 to )0 stands for 10%~100% ( estimate only )
Knob
The upper right knob switch rotates clockwise to increase volume, counterclockwise to decrease volume, and presses down to mute.
USB Wired/BT5.0/2.4G Tri Mode Pairing Method:
Wired Mode:
Please toggle the mode switch to the middle (USB mode), and then insert USB cable to your computer, the keyboard backlight lights on and turns to the default of RGB backlight effect, which means connection successful.
Bluetooth® Pairing Instructions: Perform the following steps to pair this keyboard with your device(s).
1.CIDOO Nebula mechanical keyboard can connect up to 3 devices at the same time . Please toggle the mode switch to the Bluetooth mode. And long press FN + Q/W/E for 3~5 seconds to enter pairing mode. At this time, the Q/W/E key flashes blue quickly indicate that its ready to connect .
2.Open the Bluetooth settings on your device and scan for available devices. Locate and select any device name of three group " CIDOO Nebula-1 " "CIDOO Nebula-2", "CIDOO Nebula-3 "
3. Once the keyboard has connected to your device, the Q/W/E key will cease flashing, and indicating that Bluetooth pairing was successful. Short press "FN" and "Q" or "FN" and "W" or "FN" and "E" keys to switch paired Bluetooth device.
The Bluetooth connection has memory . It will disconnect when power off the keyboard ,and the keyboard will re-connect to the last device when power on the keyboard again.
2.4Ghz Wireless Connection:
1.Please toggle the mode switch to 2.4Ghz mode .Plug in receiver into your device .The "R" key led will light on green for 3 seconds and whole keyboard backlight light on indicates that 2.4G connected successfully .
2.4Ghz pairing instruction
The keyboard 2.4Ghz mode is default paired . If you need to re-pair 2.4Ghz mode , Please perform the following operations :
Long press FN+R key enter 2.4g pairing mode . At this time, the R key flashes green color quickly. Insert 2.4G dongle to USB port .After the connection is successful, the R key stops blinking.
Auto Sleep Mode
After 5 minutes without a keypress, the backlighting will turn off to conserve battery. Any keypress will light on backlight .
After 30 minutes without a keypress, the keyboard entry deep sleep under Bluetooth mode, Bluetooth disconnect, any keypress will exit deep sleep mode, RGB lights turn on, and the Bluetooth re-connect the keyboard
Battery Charging:
FN key will blink red when the keyboard is low battery (battery voltage less than 3.5V). It is steady red light when charging, Turns to the default RGB backlighting once charging is complete.
Custom Configuration
CIDOO NEBULA supports remap the keys via VIA firmware in wired mode and 2.4G mode NoteMake sure your keyboard is properly plugged into your computer device VIA installation steps are as follows: 1.Please visit https://github.com/WestBerryVIA/via-releases/releases to download the latest VIA application for your computer's OS here. See below photo :
2.Download CIDOO Nebula 2.4G.JSON and CIDOO Nebula USB.JSON files from CIDOO official website or distributor ,and upload it to VIA software. Note :Select the appropriate JSON file ( 2.4g if on 2.4g or USB if on wired ) See below photo:
3.Installation is completed and VIA software connected successfully if it is show as below photo.
If VIA software does not recognize your keyboard, please contact our customer service staff for assistance. VIA automatically detects your keyboard compatibility if it's plugged in. Keyboard memory is persistent, which means that wherever you plug in keyboard, it remembers the settings. On the top half of VIA software, choose one key which you want to change by your mouse, and then select the key on the bottom half of VIA software, and it was effected. See below for more information about configuration Macros setting CIDOO NEBULA does not have physical multimedia keys, you can remap the keys through the VIA software to achieve the function. CIDOO NEBULA is configured with 4 layers from 0 to 3 by default, and each individual key can have multiple functions. This is important for smaller keyboards, where there aren't enough physical keys to do all the functionality you need. Special keys setting
Here you can remap the key to replace the special key to the key you want, to achieve the quick operation of the function. LED light CIDOO NEBULA VIA software provides many different RGB lighting effects by default. You can change the lighting brightness, speed, color and customize the lighting effect you want. You can also change the key to operate the lighting effect you set.
Others custom
CIDOO NEBULA Layers allow you to configure your keyboard with more behaviors than its number of physical keys .
CIDOO NEBULA default customized 0-3 layer keyboard layout. Layer0This layer will be activated when the keyboard to be connected to the Win system device, please toggle the upper right corner switch to the WIN position, Layer0: This layer will be activated when the keyboard to be connected to a Mac system device, switch the toggle switch in the upper Right corner to the MAC position. The key Left Alt=Left Option Left Win=Left Command Right Alt= Right Option.
Layer1This layer will be activated when your keyboard's system toggle switched to Windows or Mac system and long press Fn1(3) key.
Layer2This layer will be activated when your keyboard's system toggle switched to Windows or Mac and key mapped any keys to MO(2), save and then long press it.
Layer3This layer will be activated when your keyboard's system toggle switch to Windows or Mac , key mapped any keys to MO(3), save and then long press it.
Keys description
Hue+
Hue Increase
Sat+
Light Saturation+
RGB Md+ RGB Mode Next
RGB Tog... Turn On/Off Backlight
Win...
Switch to Windows mode Mac...
Switch to Mac Mode
Hue-
Hue Decrease
Sat-
Light Saturation
BT 1
Bluetooth Device 1
BT 2
Bluetooth Device 2
BT 3
Bluetooth Device 3
Brght+ Backlight Increase
Lock Win Lock Windows Key
RGB SPD RGB Speed Increase
Brght-
Backlight Decrease
RGB SPI RGB Speed Increase
Fn1(3) Layer 1 will be activated when holding this key
MO(2) Layer 2 will be activated when holding this key
MO(3) Layer 3 will be activated when holding this key
CIDOO NEBULA