BABA Smart Bluetooth Headset T001 User Guide
Compatibility
This smart headset is compatible with both Android and iOS devices.
Visual Description: Two stylized outlines of smartphones are shown. One is labeled '+ Android' and the other '+ iOS'.
To connect the smart headset T001, please follow the steps provided. For information on connecting to other devices, please refer to the rear view sheet.
Connecting the BABA Smart Bluetooth Headset
Visual Description: An illustration of a wireless earbud and its charging case is presented, with an indicator arrow pointing towards the earbud.
Follow these steps to connect your BABA smart Bluetooth headset:
- Open the cover of the headset charging bin. Press and hold the charging bin button for approximately three seconds until the white light flashes. Then, turn on Bluetooth on your device. The pairing name should appear as "Tap the smart headset". Select it to connect.
- Alternatively, turn on Bluetooth on your device. Hold down the charging bin button for about three seconds. The light will flash, and a matching name should pop up. If it does not appear, click the search button, find the corresponding match, and click "Connect".
Control of Baba
You can control your headset by tapping it twice to play or skip forward. Say "Hey Siri" to perform actions such as playing a song, dialing a phone number, or getting directions.
Visual Description: An illustration of a wireless earbud with a circular control button is shown.
Headset Controls (The Keyboard)
| Action | Description |
|---|---|
| Empty the pairing information | Press and hold for more than 10 seconds. The white light will breathe flash, followed by an orange light breathing flash. |
| Siri function | When connected to standby or music playing state, long press the MFB (Multi-Function Button) key for about 3 seconds. |
| Cancel the dial | Press the MFB key once to cancel the call before the caller answers. |
| Answer the phone | To answer a call, press the MFB button once. |
| Refuse to answer | Press the MFB button twice to reject a call. |
| Hang up the phone | When the call is complete, press the MFB key once to end the call. |
| Play/Pause | When music is playing, press the MFB button once to pause or play the music. |
| Skip to the next song | Press the MFB key twice to switch to the next track. |
| Skip to the previous song | Press the MFB key three times to switch to the previous track. |
Reconnect the Smart Headset
Visual Description: An illustration shows a wireless earbud charging case with two earbuds placed inside.
The smart Bluetooth headset will automatically shut down after being placed for three minutes. To reconnect, place the headset back into the charging compartment, close the compartment, and then open it again to reconnect the device.