HelmholzHelmholz
Helmholz – Compatible with you | AutomatisierungstechnikHelmholz – Compatible with you | Automatisierungstechnik
User Guide for Helmholz models including: 700-848-6ES11, 700-848-6ES11 FLEXtra SLIM SPE Switch, 700-848-6ES11, FLEXtra SLIM SPE Switch, SPE Switch, Switch
24 apr 2025 — The Helmholz "FLEXtra SLIM SPE-Switch, unmanaged, 6-Port" is suitable for installation on a DIN rail and connects up to 4 Ethernet devices via SPE with 10 ...
Apr 24, 2025 · 700-848-6ES11. Name. FLEXtra SLIM SPE-Switch, unmanaged, 6-Port. 4x SPE 10 Mbit (T1L) 2x RJ45, 1 Gbit. Scope of delivery. SPE Switch with ...
FLEXtra SLIM SPE-Switch, unmanaged | SPE-Switche | Switches | Industrial Ethernet | Products | Helmholz
File Info : application/pdf, 3 Pages, 154.00KB
DocumentDocumentFLEXtra SLIM SPE-Switch, unmanaged, 6-Port, 4x SPE 10 Mbit (T1L) + 2x RJ45, 1 Gbit (700-848-6ES11) Version 1 for Hardware 1 Application area The Helmholz "FLEXtra SLIM SPE-Switch, unmanaged, 6-Port" is suitable for installation on a DIN rail and connects up to 4 Ethernet devices via SPE with 10 Mbit and 2 Ethernet devices with up to 1000 Mbps via RJ45. The FLEXtra SLIM SPE switch is also suitable for PROFINET networks. The LLPD (neighbourhood detection) and PTCP (time synchronization) functions are handled correctly with the switch in accordance with the PROFINET standard. The FLEXtra SLIM SPE switch therefore complies with PROFINET Conformance Class A. Connections The FLEXtra SLIM Ethernet SPE switch has 4 SPE connections (X1 P1 - X1 P4) and 2 RJ45 connections (X1 P5 & X1 P6). The switch must be supplied with 24 V DC at the wide range input "Ext. V DC 18...30 V" via the supplied connector plug. The connection (FE, ) is for the functional earth. Connect this properly to the reference potential. Features - SPE 10Base-T1L (IEEE 802.3cg) - SPE 10 Mbps, up to 1000m cable length - SPE Stecker as of IEC 63171-2 (,,Phoenix Contact") - SPoE Power Klassen 10, 11, 12 (SCCP); up to 8,4 W (24V) - RJ45-Ethernet 100Base-TX/ 1000Base-T, up to 1Gbit - Store-and-Forward architecture - Full-/Half-Duplex, Autonegotiation - Auto MDI/MDI-X (IEEE 802.3u Auto crossover support) - LLDP & PTCP Delay-Traffic blocking (for PROFINET networks) - PROFINET Conformance Class A - VLAN, supported VIDs: 0-62 - QoS-Priority Queues: 8 - 2K MAC address lookup table - 32KB frame buffer - Max. frame size 10240 bytes LEDs PWR-LED An = Power supply available Aus = No voltage or the device is defective SPE LEDs (X1 P1 X1 P4) Oben Orange (Power/Error): Unten Orange (Link/Activity): Aus = Kein SPoE Ein = Connected Ein = SPoE active Flashing = SPoE Fehler Flashing = Data transmission RJ45 LEDs (X1 P5 + X1 P6) Orange (Link): Ein = Connected Grün (Traffic): Flashing = Data transmission Helmholz GmbH & Co. KG | Hannberger Weg 2 | D-91091 Großenseebach Phone +49 9135 7380-0 | Fax +49 9135 7380-490 | info@helmholz.de | www.helmholz.de 24.04.2025 Technical data Order no. Name Scope of delivery Dimensions (DxWxH) Weight SPE Interface (X1 P1-P4) Number Connection Transmission rate Type SPoE, Power Classes (24V) RJ45 Interface (X1 P5+P6) Number Connection Transmission rate Type Status indication Power display RJ45 Status SPE Status Power supply Voltage supply Current draw Power loss Ambient conditions Ambient temperature Transport and storage temp. Relative air humidity Pollution degree Protection rating Approvals 700-848-6ES11 FLEXtra SLIM SPE-Switch, unmanaged, 6-Port 4x SPE 10 Mbit (T1L) + 2x RJ45, 1 Gbit SPE Switch with power supply plug 35,1mm x 25mm x 109mm (without connector) Approx. 120g 4 SPE-Socket, IEC 63171-2 (,,Phoenix Contact"), IP20 10Mbit/s 10Base-T1L, IEEE 802.3cg; Autonegotiation up to 1000m cable length, Cable according to IEC 61156-13/14 10: 1.23 W, 1000m, 18AWG 11: 3.2 W, 1000m, 14AWG 12: 8.4 W, 400m, 14AWG 2 RJ45 100/1000 Mbit/s 100Base-TX, 1000Base-T, Full-/Half-Duplex, Autonegotiation, Auto MDI/MDI-X; IEEE Auto crossover; LLDP & PTCP Delay-Traffic blocking (for PROFINET networks) 1 LED, green 4 LEDs, orange/green 8 LED, Orange top/bottom 24 V DC (22...30 V DC) max. 200 mA at 24 V DC + max. 2.6 A for SPoE max. 4,5 W + max. 61 W for SPoE -25 °C ... +75 °C -40 °C ... +85 °C 95 % r. H. without condensation 2 IP20 CE Helmholz GmbH & Co. KG | Hannberger Weg 2 | D-91091 Großenseebach Phone +49 9135 7380-0 | Fax +49 9135 7380-490 | info@helmholz.de | www.helmholz.de 24.04.2025 Attention: If the device is used in a manner not specified by the manufacturer, the protection provided by the device may be affected. Pay special attention to the correct contact during cable installation. If you have problems, always read the latest documentation first, which can be found on the Internet at www.helmholz.com. Connected circuits shall meet the requirements of Limited energy circuits acc. UL61010-1. Note: The contents of this document have been checked by us for matching with the hardware and software described. However, we assume no liability for any existing differences, as these cannot be fully ruled out. The information in this document is, however, updated on a regular basis. When using your purchased products, please make sure to use the latest version of the document, which can be viewed and downloaded on the Internet at www.helmholz.de. Helmholz GmbH & Co. KG | Hannberger Weg 2 | D-91091 Großenseebach Phone +49 9135 7380-0 | Fax +49 9135 7380-490 | info@helmholz.de | www.helmholz.de 24.04.2025