WAVESHARE P3-64x64 RGB Full Color LED Matrix Panel Instruction Manual

Instruction Manual for WAVESHARE models including: P3-64x64 RGB Full Color LED Matrix Panel, P3-64x64, RGB Full Color LED Matrix Panel, Color LED Matrix Panel, LED Matrix Panel, Matrix Panel, Panel

User Manual (PDF)

Waveshare RGB Full-Color LED Matrix Panel 3mm Pitch 64×64 Pixels 4096 Individual RGB LEDs Adjustable Brightness Compatible with Raspberry Pi : Electronics & Photo

File Info : application/pdf, 1 Pages, 1.22MB

A1RV-3ICziL

RGB-Matrix-P3-64x64

This product is a bare screen and needs to be displayed with the main control board such as Raspberry Pi, ESP32, and Arduino. For details, please refer to the list.
Overview

RGB-Matrix-P3-64x64
RGB full-color LED matrix panel 3mm Pitch 64x64 pixels

Introduction

This product is a 64 × 64 full-color LED matrix panel with 4096

RGB LEDs onboard and 3mm pitch, which supports Raspberry Pi and Arduino, etc. It provides supporting open-source demos

RGB LED, 64 x 64=4096 DOTS, 3mm Pitch

and tutorials, suitable for makers or electronics Enthusiasts to

RGB-Matrix-P3-64x64-F

start learning, or DIY secondary development into other desktop or wall-mounted display applications.

Flexible RGB full-color LED matrix panel 3mm Pitch 64x64 pixels

Features
4096 individual RGB LEDs, full-color display, adjustable brightness. 64 × 64 pixels, 3mm pitch, allows displaying text, colorful images, or animation. 192 × 192mm dimensions, moderate size, suitable for DIY desktop display or wall mount display. Onboard two HUB75 headers, one for controller data input, one for output, and chain support. Provides open-source development resources and tutorials, for use with Raspberry Pi, Arduino, and so on.

Specifications
DIMENSIONS PIXELS PITCH PIXEL FORM VIEWING ANGLE CONTROL TYPE DRIVING HEADER POWER SUPPLY POWER

192mm × 192mm 64 × 64=4096 DOTS 3mm 1R1G1B 160° synchronization 1/32 scan HUB75E
  5V / 4A VH4 header input
20W

Header Definition

PIN VCC R1 G1 B1 A C E LAT/STB

DESCRIPTION 5V power input R higher bit data G higher bit data B higher bit data A line selection C line selection E line selection latch pin

PIN GND R2 G2 B2 B D CLK OE

DESCRIPTION Ground R lower bit data G lower bit data B lower bit data B line selection D line selection clock input output enable

Note: The power supply ports (VCC and GND) of the display screen are 5V power supply, do not connect to other power supply voltages, so as not to burn the display screen.
Usage Scenarios
DIY Maker Desktop Or Wall Mount Display, Signboard, Environment Monitor...

Raspberry Pi Instructions
Please refer to the github information: Demo , wiring reference .
User Guides for Arduino Mega
Hardware Connection
Preparation
RGB-Matrix-P3-64x64 Arduino Mega (please purchase it separately)
Hardware Connection Diagram
Software Settings
Download example Copy the folder under libraries in AuroraDemo to the libraries in the installation directory of the Arduino IDE After connecting the wires according to the hardware connection diagram, the software settings are as follows:
RGB text display
The effect of running the instance is shown in the following figure:
  Function Description
UI: Can display icons Can display text content such as text and numbers
Working With ESP32
Hardware Connection
Preparation
RGB-Matrix-P4-64x64 NodeMCU-32S (not included)
Software Setting
Download the demo . Copy the folder under libraries in AuroraDemo to the libraries in the installation directory of the Arduino IDE. After connecting the wires according to the hardware connection diagram, the software settings are as follows:
Note: if you don't have the corresponding board, you can operate as below:
Click on file -> add board manager address -> enter: https://raw.githubuse rcontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json -> OK.
Perform
SimpleTestShapes: Display basic shapes PatternPlasma: Displays cool plasma patterns BouncingSquares: Show bouncing squares AuroraDemo: Simple example showing various animation effects #There is an open source project on GitHub: ESP32-HUB75-MatrixPanel-I2S-DM A, which has a more detailed introduction.
Working With Pico
Hardware Connection
Preparation
RGB-Matrix-P4-64x64 Raspberry Pi Pico (It must be purchased separately. If not, it is recommended to buy one with soldered pin headers, which is convenient for wiring.)
Diagram
Software Setting
Download the demo After connecting the wire according to the diagram, you can set the software: environment building
Performance
After setting up the CircuitPython environment, you can copy all the contents of the CircuitPython directory in the downloaded Pico example to the recognized U flash drive, and you can run the example (there are 16 demos in this code). The PSD folder is a file in ".psd" format, which can be used to modify the text image that needs to be moved. The modified image needs to be saved as "Excellent" and the format needs to be converted to BMP format.
Function
Display text Set scrolling effect
Resources
Demo Sample 2D Drawing windows-arduino-1.8.15
Support
If you require technical support, please go to the page and open a ticket.

References

iLovePDF