Instruction Manual for HORIZON models including: Losi Tenacity DB Pro 4WD Desert Buggy Brushless RTR
EN 2 TENACITY-DB PRO RTR, AVC: 1:10 4WD DESERT BUGGY INSTRUCTION MANUAL Age Recommendation: Not for children under 14 years. This is not a toy.
File Info : application/pdf, 16 Pages, 7.57MB
DocumentDocumentUS 9,320,977. US 10,528,060. Scan the QR code and select the Manuals and Support quick links from the product page for the most up-to-date manual information. Scannen Sie den QR-Code und wählen Sie auf der Produktseite die Quicklinks Handbücher und Unterstützung, um die aktuellsten Informationen zu Handbücher. Scannez le code QR et sélectionnez les liens rapides Manuals and Support sur la page du produit pour obtenir les informations les plus récentes sur le manuel. Scannerizzare il codice QR e selezionare i Link veloci Manuali e Supporto dalla pagina del prodotto per le informazioni manuali più aggiornate. INSTRUCTION MANUAL BEDIENUNGSANLEITUNG MANUEL D'UTILISATION MANUALE DI ISTRUZIONI Before operating this vehicle, please read all printed materials thoroughly. Horizon Hobby is not responsible for inadvertent errors in this manual. EN NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature, visit www.horizonhobby.com or www.towerhobbies.com and click on the support or resources tab for this product. MEANING OF SPECIAL LANGUAGE The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product: WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high probability of superficial injury. CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury. NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no possibility of injury. WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury. WARNING AGAINST COUNTERFEIT PRODUCTS Always purchase from a Horizon Hobby, LLC authorized dealer to ensure authentic high-quality Spektrum product. Horizon Hobby, LLC disclaims all support and warranty with regards, but not limited to, compatibility and performance of counterfeit products or products claiming compatibility with DSM or Spektrum technology. Age Recommendation: Not for children under 14 years. This is not a toy. SAFETY PRECAUTIONS AND WARNINGS As the user of this product, you are solely responsible for operating in a manner that does not endanger yourself and others or result in damage to the product or property of others. This model is controlled by a radio signal subject to interference from many sources outside your control. This interference can cause momentary loss of control, so it is advisable to always keep a safe distance in all directions around your model as this margin will help avoid collisions or injury. · Never operate your model with low transmitter batteries. · Always operate your model in open spaces away from full-size vehicles, traffic and people. · Never operate the model in the street or in populated areas for any reason. · Carefully follow the directions and warnings for this and any optional support equipment (chargers, rechargeable battery packs, etc.) you use. · Keep all chemicals, small parts and anything electrical out of the reach of children. · Never lick or place any portion of the model in your mouth as it could cause serious injury or even death. · Exercise caution when using tools and sharp instruments. · Take care during maintenance as some parts may have sharp edges. · Immediately after using your model, do NOT touch equipment such as the motor, electronic speed control and battery, because they generate high temperatures. You may burn yourself seriously touching them. · Do not put fingers or any objects inside rotating and moving parts, as this may cause damage or serious injury. · Always turn on your transmitter before you turn on the receiver in the car. Always turn off the receiver before turning your transmitter off. · Keep the wheels of the model off the ground when checking the operation of the radio equipment. TABLE OF CONTENTS BOX CONTENTS........................................................................................................3 COMPONENTS .................................................................................................................. 3 WATER-RESISTANT VEHICLE WITH WATERPROOF ELECTRONICS ..............................3 GENERAL PRECAUTIONS...................................................................................................3 WET CONDITIONS MAINTENANCE....................................................................................3 QUICK START............................................................................................................3 CHARGING THE BATTERY .........................................................................................3 INSTALLING THE BATTERY........................................................................................4 SPEKTRUM DX3 ACTIVE RADIO SYSTEM ..................................................................4 INSTALLING THE TRANSMITTER BATTERIES........................................................................4 SRS6200A AVC TECHNOLOGY TELEMETRY RECEIVER ........................................................4 AUX CHANNELS................................................................................................................4 DISABLING AVC® TECHNOLOGY STABILITY ASSIST.............................................................5 FAILSAFE ..........................................................................................................................5 DRIVING PRECAUTIONS ..........................................................................................5 POWERING ON THE VEHICLE....................................................................................5 BEFORE RUNNING YOUR VEHICLE............................................................................5 AVC® SENSITIVITY....................................................................................................5 RUN TIME.................................................................................................................6 TO IMPROVE RUN TIMES...................................................................................................6 PERFORMING A CONTROL DIRECTION TEST.............................................................6 CHANGING THE TRAVEL ADJUST SETTINGS .............................................................6 SPEKTRUMTM FIRMATM SMART 130A BRUSHLESS ESC (SPMXSE1130).......................6 SPECIFICATIONS ...............................................................................................................6 ESC LED STATUS ...............................................................................................................6 AUDIBLE WARNING TONES ...............................................................................................6 ESC CALIBRATION PROCEDURE ........................................................................................6 ESC FUNCTIONS AND MODES ...........................................................................................7 PROGRAMMING TABLE.....................................................................................................7 ESC PROGRAMMING PROCEDURE....................................................................................7 DESCRIPTIONS .................................................................................................................. 7 SPEKTRUMTM FIRMATM 3150KV BRUSHLESS MOTOR..................................................8 PRECAUTIONS ..................................................................................................................8 GEARING .........................................................................................................................8 CHANGING THE PINION GEAR/GEAR RATIO......................................................................8 SETTING THE GEAR MESH.................................................................................................8 TELEMETRY SETTINGS.......................................................................................................8 TROUBLESHOOTING GUIDE......................................................................................8 LIMITED WARRANTY ...............................................................................................8 WARRANTY AND SERVICE CONTACT INFORMATION................................................9 FCC INFORMATION ..................................................................................................9 IC INFORMATION .....................................................................................................9 COMPLIANCE INFORMATION FOR THE EUROPEAN UNION ......................................9 REPLACEMENT PARTS ............................................................................................34 RECOMMENDED PARTS..........................................................................................35 OPTIONAL PARTS ...................................................................................................35 EXPLODED VIEW ....................................................................................................36 2 TENACITY-DB PRO RTR, AVC: 1:10 4WD DESERT BUGGY · INSTRUCTION MANUAL BOX CONTENTS EN COMPONENTS · Losi® TENACITY® DB PRO RTR, AVC®: 1/10-Scale 4WD Desert Buggy (LOS03027V2T1/T2) · SpektrumTM DX3TM 2.4GHz Transmitter (SPM2340) · Spektrum 6-Channel DSMR® AVC® Surface Receiver (SPMSR6200A) · Spektrum 15KG 23T Steel Gear Waterproof Servo (SPMS614S) · Spektrum FirmaTM SMART 130A Brushless ESC (SPMXSE1130) · Spektrum Firma 3150Kv Brushless Motor (SPMXSM1000) · 4 AA batteries (for transmitter) WATER-RESISTANT VEHICLE WITH WATERPROOF ELECTRONICS Your new Horizon Hobby vehicle has been designed and built with a combination of waterproof and water-resistant components to allow you to operate the product in many "wet conditions," including puddles, creeks, wet grass, snow and even rain. While the entire vehicle is highly water-resistant, it is not completely waterproof and your vehicle should NOT be treated like a submarine. The various electronic components used in the vehicle, such as the Electronic Speed Control (ESC), servo(s) and receiver are waterproof, however, most of the mechanical components are water-resistant and should not be submerged. Metal parts, including the bearings, hinge pins, screws and nuts, as well as the contacts in the electrical cables, will be susceptible to corrosion if additional maintenance is not performed after running in wet conditions. To maximize the long-term performance of your vehicle and to keep the warranty intact, the procedures described in the "Wet Conditions Maintenance" section below must be performed regularly if you choose to run in wet conditions. If you are not willing to perform the additional care and maintenance required, then you should not operate the vehicle in those conditions. WET CONDITIONS MAINTENANCE · Drain any water that has collected in the tires by spinning them at high speed. With the body removed, place the vehicle upside down and pull full throttle for a few short bursts until the water has been removed. CAUTION: Always keep hands, fingers, tools and any loose or hanging objects away from rotating parts when performing the above drying technique. · Remove the battery pack(s) and dry the contacts. If you have an air compressor or a can of compressed air, blow out any water that may be inside the recessed connector housing. · Remove the tires/wheels from the vehicle and gently rinse the mud and dirt off with a garden hose. Avoid rinsing the bearings and transmission. NOTICE: Never use a pressure washer to clean your vehicle. CAUTION: Failure to exercise caution while using this product and complying with the following precautions could result in product malfunction and/or void the warranty. GENERAL PRECAUTIONS · Read through the wet conditions maintenance procedures and make sure that you have all the tools you will need to properly maintain your vehicle. · Not all batteries can be used in wet conditions. Consult the battery manufacturer before use. Caution should be taken when using Li-Po batteries in wet conditions. · Most transmitters are not water-resistant. Consult your transmitter's manual or the manufacturer before operation. · Never operate your transmitter or vehicle where lightning may be present. · Do not operate your vehicle where it could come in contact with salt water (ocean water or water on salt-covered roads), contaminated or polluted water. Salt water is very conductive and highly corrosive, so use caution. · Even minimal water contact can reduce the life of your motor if it has not been certified as water-resistant or waterproof. If the motor becomes excessively wet, apply very light throttle until the water is mostly removed from the motor. Running a wet motor at high speeds may rapidly damage the motor. · Driving in wet conditions can reduce the life of the motor. The additional resistance of operating in water causes excess strain. Alter the gear ratio by using a smaller pinion or larger spur gear. This will increase torque (and motor life) when running in mud, deeper puddles, or any wet conditions that will increase the load on the motor for an extended period of time. · Use an air compressor or a can of compressed air to dry the vehicle and help remove any water that may have gotten into small crevices or corners. · Spray the bearings, drive train, fasteners and other metal parts with a water-displacing light oil. Do not spray the motor. · Let the vehicle air dry before you store it. Water (and oil) may continue to drip for a few hours. · Increase the frequency of disassembly, inspection and lubrication of the following: - Front and rear axle hub assembly bearings. - All transmission cases, gears and differentials. - Motor--clean with an aerosol motor cleaner and re-oil the bushings with lightweight motor oil. QUICK START Please read the entire manual to gain a full understanding of the TENACITY RTR vehicle, fine-tuning the setup and performing maintenance. 1. Read the safety precautions found in this manual. 2. Charge a battery for the vehicle. Refer to the included charging warnings and instructions for battery charging information. 3. Install the AA batteries in the transmitter. Only use alkaline or rechargeable batteries. 4. Install the fully charged battery in the vehicle. 5. Power ON the transmitter and then the vehicle. Wait 5 seconds for the ESC to initialize. Always power the transmitter ON before the vehicle and power it OFF after the vehicle has been powered OFF. 6. Check the steering and throttle control directions. Verify that the servos are moving in the correct direction. 7. Drive your vehicle. 8. Perform any necessary maintenance. CHARGING THE BATTERY Choose a battery designed to work with the SpektrumTM FirmaTM SMART 130A Brushless ESC (SPMXSE1130). We recommend the Spektrum 5000mAh 2S 7.4V 50C SMART LiPo hardcase battery with IC5TM connector (SPMX50002S50H5) or Spektrum 5000mAh 3S 11.1V 50C SMART LiPo IC5 hardcase battery with IC5 connector (SPMX50003S50H5). Choose a charger designed to charge 2S and/or 3S Li-Po batteries. We recommend the Dynamite® Passport TM P1 mini-AC Input Balance Charger/Discharger (DYNC3015). Refer to your battery and charger manuals for usage, safety, and charging information. IMPORTANT: When using a 3S battery, you must change the motor pinion gear to the 15T pinion provided with your vehicle. TENACITY-DB PRO RTR, AVC: 1:10 4WD DESERT BUGGY · INSTRUCTION MANUAL 3 EN INSTALLING THE BATTERY 1. Ensure the ESC is powered OFF. 2. Remove the body clips and rotate the body up. 3. Remove the body clip from the battery hold down and open the battery tray. 4. Insert the battery into the battery tray. 5. Rotate the battery strap down, and insert the body clip to secure the battery. 6. Connect the battery power lead to the ESC, noting proper polarity. 7. Power ON the transmitter, then the vehicle. 8. Rotate the body into place, and insert the body clips. IMPORTANT: Secure the ESC wires so they do not interfere with the gearing. The vehicle is setup at the factory for use with a 2S LiPo battery. To install an optional 3S LiPo battery, the included spacers must be added to the battery tray as shown. NOTICE: If you are using a 2S Li-Po battery, use the included 17T Pinion gear. If you are using a 3S Li-Po battery, use the optional 15T pinion gear (included). Using a 17T pinion gear with a 3S Li-Po battery will result in damage to the ESC and motor. 3S battery spacers SPEKTRUMTM DX3 RADIO SYSTEM I H J G K F L E M N A/B D C A/B. Channel 3 Button C. Throttle/Brake D. Steering Wheel E. Steering Rate - Adjusts the end point of the steering F. Brake Rate - Adjusts the braking end point. G. Steering Trim - Adjusts the steering center point. Normally, the steering trim is adjusted until the vehicle tracks straight. H. Throttle Trim - Adjusts the throttle neutral point I. SMART Battery Level Indicator J. Servo Reversing - To reverse the Throttle (TH) or Steering (ST) channel, switch the position of the correlating switch-- "N" is for normal, "R" is for reverse. K. Throttle Limit - Limits throttle output to 50/75/100% Select 50% or 75% for less experienced drivers or when you are driving the vehicle in a small area. L. Power LED · Solid red lights: Indicates radio connectivity and adequate battery power · Flashing red lights: Indicates the battery voltage is critically low. Replace batteries M. Power Button N. Bind Button INSTALLING THE TRANSMITTER BATTERIES 1. Push in the battery cover a small amount to release the retaining tab, then remove the cover. 2. Install 4 AA batteries, taking care to align the battery polarity to the diagram in the transmitter's battery case. 3. Carefully reinstall the battery cover by aligning the tabs with the slots on the transmitter. For more information on the transmitter, go to www.horizonhobby.com and click on the support tab for the Spektrum DX3 to download the instruction manual. CAUTION: Never remove the transmitter batteries while the model is powered ON. Loss of model control, damage, or injury may occur. CAUTION: If using rechargeable batteries, charge only rechargeable batteries. Charging non-rechargeable batteries may cause the batteries to burst, resulting in injury to persons and/or damage to property. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to national regulations. Battery/Programming Port Steering Port Throttle Port AUX 1 Port AUX 2 Port AUX 3 Port AUX 4 Port 4 Bind Button SRS6200A AVC TECHNOLOGY RECEIVER AUX CHANNELS The Aux channels can operate as additional servo channels, or as a power supply for a personal transponder. If AVC is active, only 4 channels; Steering, Throttle, AUX3 and AUX4 are operational. The remaining Aux channels can be used to power a personal transponder or lights. If AVC is disabled (see DISABLING THE STABILITY ASSIST FUNCTION), all 6 channels including the Aux channels can operate as servo channels. TENACITY-DB PRO RTR, AVC: 1:10 4WD DESERT BUGGY · INSTRUCTION MANUAL EN BINDING AND CALIBRATING THE RECEIVER Binding is the process of linking the SR6200A receiver to your Spektrum transmitter. The AVC features on the receiver can be enabled or disabled during the binding process. IMPORTANT: You must calibrate the SR6200A receiver each time it is placed in bind mode, regardless of AVC being enabled or disabled. Upon initial setup after the first bind, the model must be configured for servo direction, trim and travel. Then the receiver must be rebound and calibrated to those settings for proper operation. Center the steering trim and throttle trim on the transmitter before beginning. 1. Press and hold the bind button on the receiver. 2. Power on the receiver. The orange LED flashes, indicating the receiver is in bind mode. Release the bind button after the orange LED illuminates. 3. Put your transmitter in bind mode. The bind process is complete when the orange LED on the receiver remains lit. The receiver is now bound to the transmitter but must be calibrated before it will operate. 4. Pull the transmitter trigger to full throttle, pause, then return the trigger to center. CAUTION: When the bind process is complete, the throttle and steering channels are active. Keep hands and loose objects away from all spinning parts on the vehicle. IMPORTANT: You must rebind the transmitter and receiver if you: · Change the servo reversing after binding · Change the travel after binding · Change the receiver mounting orientation DISABLING AVC® TECHNOLOGY STABILITY ASSIST If you participate in organized racing, you may be required to turn AVC technology off. To turn off AVC technology: 1. Connect power to the receiver and quickly press and release the bind button three times (within 1.5 seconds). 2. Press and hold the bind button and to put the receiver in bind mode. release the buton when the LED starts to flash rapidly, indicating it is in bind mode. When the AVC system has been disabled, the LED on the receiver will show three flashes upon power up, and then remain lit. The receiver is bound and operating normally when the LED remains illuminated. TIP: If the AVC feature in the receiver is active and the AVC menu in the transmitter is Inhibited, AVC functions will default to the AUX 1 and AUX 2 operation, and in this scenario, AVC will not work correctly. FULL THROTTLE BRAKE/REVERSE 5. Push the transmitter trigger to full brake, pause, then return the trigger to center. 6. Turn the transmitter steering wheel to full right, pause, then return the wheel to center. 7. Turn the transmitter steering wheel to full left, pause, then return the steering wheel to center. The orange LED flashes to confirm the settings have been accepted. 8. Turn off the vehicle to complete the binding and calibration process. FAILSAFE In the unlikely event that the radio link is lost during use, the receiver will drive the throttle channel to the neutral position. If the receiver is powered on prior to turning on the transmitter, the receiver will enter the failsafe mode, driving the throttle channel to the neutral position. When the transmitter is turned on, normal control is resumed. IMPORTANT: Failsafe activates only in the event that signal is lost from the transmitter. Failsafe will NOT activate in the event that receiver battery power decreases below the recommended minimums or power to the receiver is lost. DRIVING PRECAUTIONS · Maintain sight of the vehicle at all times. · Routinely inspect the vehicle for loose wheel hardware. · Routinely inspect the steering assembly for any loose hardware. Driving the vehicle off-road can cause fasteners to loosen over time. · Do not drive the vehicle in tall grass. Doing so can damage the vehicle or electronics. · Stop driving the vehicle when you notice a lack of power. Driving the vehicle when the battery is discharged can cause the receiver to power off. If the receiver loses power, you will lose control of the vehicle. Damage due to an over-discharged Li-Po battery is not covered under warranty. CAUTION: Do not discharge a Li-Po battery below 3V per cell. Batteries discharged to a voltage lower than the lowest approved voltage may become damaged, resulting in loss of performance and potential fire when batteries are charged. · Do not apply forward or reverse throttle if the vehicle is stuck. Applying throttle in this instance can damage the motor or ESC. · After driving the vehicle, allow the electronics to cool before driving the vehicle again. IMPORTANT: Keep wires away from all moving parts. BEFORE RUNNING YOUR VEHICLE 1. Check for free suspension movement. All suspension arms and steering components should move freely. Any binds will cause the vehicle to handle poorly. TIP: To increase the ride height and ground clearance of your vehicle, screw down the shock collars to compress the springs. 2. Charge a battery pack. Always charge the battery pack as per the battery and/or charger manufacturers' instructions. 3. Set the transmitter steering trim. Follow the instructions to set the steering trim/subtrim so that the vehicle drives straight with no input to the steering. 4. Perform a Control Direction Test. POWERING ON THE VEHICLE 1. Center the ST TRIM and TH TRIM dials on the transmitter. 2. Power on the transmitter. 3. Install a fully charged battery pack per the Installing the Battery section. 4. Power on the ESC. IMPORTANT: The vehicle MUST remain on a flat, level surface and motionless for at least 5 seconds. AVC® SENSITIVITY The ST RATE dial adjusts the sensitivity, or stability, value in the receiver. If you increase the sensitivity, the AVC® system becomes more sensitive to the vehicle drifting left or right. You would use maximum sensitivity during high speed driving or drag racing, when you want the vehicle to stay in a straight line. Turn the ST RATE knob counter-clockwise to reduce the sensitivity. Turn the ST RATE knob clockwise to increase the sensitivity. IMPORTANT: The ST RATE knob will only adjust the sensitivity when the transmitter is bound to a DSMR® receiver. When the transmitter is bound to a DSM®, DSM2® or DSM Marine receiver, the ST RATE knob controls the steering dual rate. TENACITY-DB PRO RTR, AVC: 1:10 4WD DESERT BUGGY · INSTRUCTION MANUAL 5 EN RUN TIME The largest factor in run time is the capacity of the battery pack. A larger mAh rating increases the amount of run time experienced. The condition of a battery pack is also an important factor in both run time and speed. The battery connectors may become hot during driving. Batteries will lose performance and capacity over time. Driving the vehicle from a stop to full speed repeatedly will damage the batteries and electronics over time. Sudden acceleration will also lead to shorter run times. TO IMPROVE RUN TIMES · Keep your vehicle clean and well maintained. · Allow more airflow to the ESC and motor. · Change the gearing to a lower ratio. A lower ratio decreases the operating temperature of the electronics. Use a smaller pinion gear or larger spur gear to lower the gear ratio. · Use a battery pack with a higher mAh rating. · Use the optimum charger to charge battery packs (Visit your local hobby dealer for more information). PERFORMING A CONTROL DIRECTION TEST Perform a control test with the vehicle wheels off the ground. If the wheels rotate after the vehicle is powered ON, adjust the TH Trim knob until they stop. To make the wheels move forward, pull the trigger. To reverse them, wait for the wheels to stop, then push the trigger. When moving forward, the wheels should maintain a straight line without any steering wheel input. If not, adjust the ST Trim knob, so the wheels maintain a straight line without having to turn the steering wheel. CHANGING THE TRAVEL ADJUST SETTINGS Set the travel adjust settings with all four vehicle wheels off the ground. The throttle end point and brake end point adjustments will cause the wheels to spin at full speed. Have an assistant safely hold the vehicle securely while adjusting these settings. CAUTION: Keep hands, hair and all loose clothing away from any moving parts, especially the wheels, while setting the travel adjust end points. Serious injury may result. 1. Hold the trigger in the full brake position and turn the steering wheel to full right while powering on the transmitter. The LED flashes rapidly, indicating programming mode is active. 2. Throttle End Point: Continue holding full throttle. Turn the TH TRIM knob to adjust the full throttle end point. 3. Brake End Point: Hold the trigger in the full brake position. Turn the TH TRIM knob to adjust the full brake end point. Return the trigger to the center position. 4. Left Steering End Point: Hold the steering wheel in the full left position. Turn the ST TRIM knob to adjust the left end point. 5. Right Steering End Point: Hold the steering wheel in the full right position. Turn the ST TRIM knob to adjust the right end point. Return the steering wheel to the center position. 6. Power off the transmitter to save the travel adjust settings. The minimum Travel is 75%, and the Maximum travel is 150%. IMPORTANT: If the travel is changed on the DX3, you must rebind and calibrate the SR6200A SPEKTRUMTM FIRMATM SMART 130A BRUSHLESS ESC (SPMXSE1130) SPECIFICATIONS Type Output Function Input Voltage BEC Output Dimensions (LxWxH) Weight Sensorless, SMART Throttle Compatible 130A/760A Forward/BrakeForward/Brake Reverse 7.4V14.8V (The motor in this vehicle will not support 14.8V) 6V/4A 57.5mm x 46mm x 38mm 154 g ESC LED STATUS · No ESC LEDs will glow when there is no throttle input from the transmitter. · The red ESC LED glows when there is any throttle input from the transmitter. AUDIBLE WARNING TONES 1. Input Voltage: The ESC checks the input voltage when it is powered ON. If a voltage problem is detected, the ESC continuously sounds 2 beeps with a 1 second pause (xx-xx-xx). Power OFF the ESC and ensure the connections are secure and that the battery power is not too low for safe operation. 2. Radio Connection: The ESC checks radio signal input when it is powered ON. If a problem is detected, the ESC continuously sounds 1 beep with a 2 second pause (x--x--x). Power OFF the ESC and ensure the radio system is operating correctly. NOTICE: Always disconnect the battery from the ESC after operating your vehicle. The ESC's switch only controls power to the receiver and servos. The ESC will continue to draw current when connected to the battery, resulting in possible damage to the battery through over discharge. ESC CALIBRATION PROCEDURE Complete the transmitter/receiver binding procedure prior to calibrating the ESC. 1. Set the transmitter throttle channel to 100% travel and center the throttle trim. 2. Connect a battery to the ESC battery lead. 3. Power on the transmitter. 4. Press and hold the SET button while turning on the ESC. Release the SET button when the red LED begins to flash, indicating the ESC is in calibration mode. The ESC will enter programming mode if the button is held for more than three seconds. TIP: The red LED should be flashing when the ESC enters calibration mode. If the green LED is flashing the ESC has entered programming mode. Power off the ESC and repeat step 4, releasing the SET button when the red LED begins to flash. 5. With the transmitter throttle trigger at the neutral position, press and release the ESC SET button. The red LED will stop flashing, the green LED will flash one time and the motor will make a tone to indicate the neutral position has been accepted. 6. While holding the throttle trigger at the full throttle position, press and release the ESC SET button. The green LED will flash twice and the motor will make two tones to indicate the full throttle position has been accepted. 7. While holding the throttle trigger at the full brake position, press and release the SET button. The green LED will flash three times and the motor will make three tones to indicate the full brake position has been accepted. The motor will operate normally after calibration is completed. 6 TENACITY-DB PRO RTR, AVC: 1:10 4WD DESERT BUGGY · INSTRUCTION MANUAL EN ESC FUNCTIONS AND MODES The ESC includes programming options so you can adjust the way your vehicle performs. Refer to the included programming table to adjust the ESC for your driving conditions. PROGRAMMING TABLE PROGRAMMING ITEMS 1. Running Mode 2. Drag Brake Force 3. Low Voltage Cutoff 4. Start Mode 5. Max Brake Force 6. Max Reverse Force 7. Initial Brake Force 8. Neutral Range 9. Timing 10. Motor Rotation 11. Li-Po Cells 1 Forward w/ brake 0% non-protection Level 1 25% 25% = Drag Brake 6% (Narrow) 0.00º Counterclockwise Auto Calculate 2 Forward/Reverse w/ brake 5% 2.6V/Cell Level 2 50% 50% 0% 9% (Normal) 3.75º Clockwise 2 Cells PROGRAMMING VALUE 3 Forward/Reverse 10% 2.8V/Cell Level 3 75% 75% 20% 12% (Wide) 7.50º 4 20% 3.0V/Cell Level 4 100% 100% 40% 11.25º 5 40% 3.2V/Cell Level 5 disable 15.00º Default Settings 6 7 8 9 60% 3.4V/Cell Level 6 80% 100% Level 7 Level 8 Level 9 18.75º 22.50º 26.25º 3 Cells 4 Cells 5 Cells 6 Cells ESC PROGRAMMING PROCEDURE Programming is accomplished using the SET button on the ON/OFF switch*. 1. Connect a fully charged battery to the ESC. 2. Power on the transmitter. 3. Power on the ESC. 4. Hold the SET button until the green LED flashes. Release the set button to enter programming mode. TIP: To reset all programming items to the default values, press and hold the set button for five seconds 5. Press and release the set button as needed to cycle through the programming items. The number of times the green LED flashes equals the programming item number given in the programming table. 6. When at the desired programming item, press and hold the set button until the red LED flashes to select the item. 7. Press and release the SET button to cycle through the values available for the programming item based on the number of times the LED flashes. Refer to the programming table. 8. Save the setting by pressing and holding the SET button for 3 seconds. 9. Power off the ESC to exit programming mode or to change other programming items. * Other programming options include the Spektrum SMART Firma ESC Programming Box (SPMXCA200) and the SmartLink USB updating and programmer application. See SpektrumRC.com for more details about Spektrum SMART Firma ESCs. DESCRIPTIONS 1. Running Mode - Forward Only with Brake Intended for competition use, this mode allows only forward and brake controls. - Forward/Reverse with Brake This mode is the basic all-around mode, allowing forward, reverse and brake controls. To engage reverse while moving forward, apply the brake until the vehicle has come to a complete stop, release brake, then apply the brake again. While braking or in reverse, engaging the throttle will result in the vehicle immediately accelerating forward. 2. Drag Brake Force Adjusts the amount of brake automatically applied when the throttle is returned to the neutral position. This simulates the engine braking effect of a full-scale vehicle, allowing improved turn-in and your vehicle's general response to controls. 3. Low Voltage Cutoff This function helps to prevent battery over-discharge. The ESC continuously monitors the battery's voltage. If the voltage falls below the voltage threshold for 2 seconds, the output power shuts off and the red LED flashes twice repeatedly. The cutoff threshold calculation is based on individual Li-Po cell voltage. For Ni-MH batteries, if the voltage battery pack is higher than 9.0V, it will be treated as a 3-cell Li-Po battery pack; if it is lower than 9.0V, it will be treated as a 2-cell Li-Po battery pack. Example: for a 8.0V Ni-MH battery pack used with a 2.6V/cell threshold, it will be treated as a 2-cell Li-Po battery pack and the low-voltage cut-off threshold will be 5.2V (2.6x2=5.2). 4. Start Mode (Punch) Sets the initial throttle punch when the car accelerates. Level 1 gives a very soft initial acceleration and level 4 gives a stronger initial acceleration. 5. Max Brake Force Adjusts the maximum braking force. A higher value provides stronger braking, but can also cause the wheels to lock, resulting in loss of control of the car. 6. Max Reverse Force This parameter adjusts the maximum power when travelling in reverse. 7. Initial Brake Force (minimum brake) Adjusts the minimum amount of braking power when the brakes engage. The default value is equal to the drag brake value. A high value can lock the wheels when the brake is used. 8. Neutral Range Adjusts the throttle sensitivity around the neutral point. A higher value results in the throttle having to be moved more for the vehicle to move forward, backward or brake. 9. Timing Adjusts the motor drive current timing. More timing gives more performance, but can lower efficiency and cause damage to the motor and/or ESC by overload or overheating. NOTICE: Always ensure the motor timing is set correctly. Failure to set the motor timing correctly can result in damage to the motor and ESC. Refer to the manufacturer instructions for recommended timing settings. 10. Motor Type 11. Motor Rotation Allows you to make this change in the ESC so no wires need to be changed between the ESC and the motor. 12. Li-Po Cells Allows the ESC to automatically detect or manually set the number of cells in your Li-Po battery back. TENACITY-DB PRO RTR, AVC: 1:10 4WD DESERT BUGGY · INSTRUCTION MANUAL 7 EN SPEKTRUMTM FIRMATM 3150KV BRUSHLESS MOTOR PRECAUTIONS · Never touch moving parts. · Never disassemble while the batteries are installed. · Always let parts cool before touching. GEARING Your vehicle has been equipped with the optimal gearing installed for the use of a 2S battery. It offers an ideal balance between speed, power and efficiency. Should you decide to customize your vehicle with a 3S battery it is necessary to change to the 15T pinion (included). Installing a pinion gear with fewer teeth or a spur gear with more teeth will provide greater torque but will reduce top speed. Likewise, a pinion gear with more teeth or a spur gear with fewer teeth will reduce torque and increase top speed. Care should be taken when installing larger pinion gears as this can "overgear" the vehicle, resulting in overheating of the motor and ESC. When testing different gearing options, pay close attention to the temperature of the motor and speed control to ensure you are operating within the temperature range of the components. The motor or ESC should never be so hot that it cannot be touched. If temperatures are too hot, a different gearing combination with a lower pinion gear and/or higher spur gear is suggested. CHANGING THE PINION GEAR/GEAR RATIO 1. Remove the screw holding the pinion gear cover in place. 2. Loosen the set screw and remove the installed pinion gear. 3. Loosen the motor screws and slide the motor back. 4. Place the new pinion on the end of the motor shaft so the set screw is located over the flat on the shaft. 5. Position it so the teeth line up with the spur gear and secure the pinion by tightening the set screw. 6. Set the gear mesh. SETTING THE GEAR MESH The gear mesh has already been set at the factory. Setting it is only necessary when changing motors or gears. Proper gear mesh (how gear teeth meet) is important to the performance of the vehicle. When the gear mesh is too loose, the spur gear could be damaged by the pinion gear of the motor. If the mesh is too tight, speed could be limited and the motor and ESC will overheat. 1. Loosen the motor screws and slide the motor back. 2. Put a small piece of paper between the pinion and spur gears. 3. Push the gears together while tightening the motor screws. 4. Remove the paper. Check the mesh at 35 different locations around the spur gear for a small amount of movement. 5. Install the gear cover. NOTICE: If you are using a 2S Li-Po battery, use the included 17T Pinion gear. If you are using a 3S Li-Po battery, use the optional 15T pinion gear (included). Using a 17T pinion gear with a 3S Li-Po battery will result in damage to the ESC and motor. TELEMETRY SETTINGS If using the Spektrum Dashboard app or the optional speedometer module on your transmitter, set the motor pole count to 4 and the rollout distance to 1.5" (38.1mm). TROUBLESHOOTING GUIDE PROBLEM Vehicle does not operate Motor runs but wheels do not rotate Steering does not work Will not turn one direction Motor does not run ESC gets hot Poor run time and/or sluggish acceleration Poor range and/or glitching POSSIBLE CAUSE Battery not charged or plugged in ESC switch not "On" Transmitter not "On" or low battery Pinion not meshing with spur gear Pinion spinning on motor shaft Transmission gears stripped Drive pin broken Servo plug not in receiver properly Servo gears or motor damaged Servo gears damaged Motor wire solder joint is damaged Motor wire broken ESC damaged Motor over-geared Driveline bound up Battery pack not fully charged Charger not allowing full charge Driveline bound up Transmitter batteries low Vehicle battery low Loose plugs or wires SOLUTION Charge battery/plug in Turn on ESC switch Turn on/replace batteries Adjust pinion/spur mesh Tighten pinion gear setscrew on motor shaft flat spot Replace transmission gears Check and replace drive pin Make sure the steering servo plug is connected to the receiver steering channel, noting proper polarity Replace or repair servo Replace or repair servo Resolder the motor wire with the proper equipment Repair or replace as needed Contact Horizon Hobby Product Support Use smaller pinion or larger spur gear Check wheels and transmission for binding Recharge battery Try another charger Check wheels, transmission for binding Check and replace Recharge battery Check all wire connections and plugs LIMITED WARRANTY What this Warranty Covers Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product purchased (the "Product") will be free from defects in materials and workmanship for a period of 2 years from the date of purchase. What is Not Covered This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modification of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer, or (vi) Product not compliant with applicable technical regulations or (vii) use that violates any applicable laws, rules, or regulations. OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER'S INTENDED USE. Purchaser's Remedy Horizon's sole obligation and purchaser's sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY. Limitation of Liability HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase. 8 TENACITY-DB PRO RTR, AVC: 1:10 4WD DESERT BUGGY · INSTRUCTION MANUAL EN Law These terms are governed by Illinois law (without regard to conflict of law principals). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice. WARRANTY SERVICES Questions, Assistance, and Services Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call the toll free telephone number referenced in the Warranty and Service Contact Information section to speak with a Product Support representative. Inspection or Services If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby.com/content/servicecenter_render-service-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton. NOTICE: Do not ship Li-Po batteries to Horizon. If you have any issue with a Li-Po battery, please contact the appropriate Horizon Product Support office. Warranty Requirements For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon. Non-Warranty Service Should your service not be covered by warranty, service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashier's checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizon's Terms and Conditions found on our website http://www. horizonhobby.com/content/service-center_render-service-center. ATTENTION: Horizon service is limited to Product compliant in the country of use and ownership. If received, a non-compliant Product will not be serviced. Further, the sender will be responsible for arranging return shipment of the unserviced Product, through a carrier of the sender's choice and at the sender's expense. Horizon will hold non-compliant Product for a period of 60 days from notification, after which it will be discarded. 10/15 WARRANTY AND SERVICE CONTACT INFORMATION Country of Purchase United States of America European Union Horizon Hobby Horizon Service Center (Repairs and Repair Requests) Horizon Product Support (Product Technical Assistance) Sales Horizon Technischer Service Sales: Horizon Hobby GmbH Contact Information servicecenter.horizonhobby.com/RequestForm/ productsupport@horizonhobby.com 877-504-0233 websales@horizonhobby.com 800-338-4639 service@horizonhobby.de +49 (0) 4121 2655 100 Address 2904 Research Rd. Champaign, Illinois, 61822 USA Hanskampring 9 D 22885 Barsbüttel, Germany FCC INFORMATION FCC ID: BRWDX3Q2UC FCC ID: BRWSRS6200A This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and/or antenna and your body (excluding fingers, hands, wrists, ankles and feet). This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Supplier's Declaration of Conformity LOSI Tenacity Desert Buggy Pro with SMART Technology, RTR: 1/10 4WD (LOS03027) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Horizon Hobby, LLC 2904 Research Rd., Champaign, IL 61822 Email: compliance@horizonhobby.com Web: HorizonHobby.com IC INFORMATION CAN ICES-3 (B)/NMB-3(B) Contains IC: 6157A-KATY1T 6157A-DX3Q2UC 6157A-SRS6200A This device contains license-exempt transmitter(s)/receivers(s) that comply with Innovation, Science, and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following 2 conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. COMPLIANCE INFORMATION FOR THE EUROPEAN UNION EU Compliance Statement: Losi Tenacity Desert Buggy Pro , RTR (LOS03027) Hereby, Horizon Hobby, LLC declares that the device is in compliance with the following: EU RED 2014/53/EU; RoHS 2 Directive 2011/65/EU; RoHS 3 Directive - Amending 2011/65/EU Annex II 2015/863. The full text of the EU declaration of conformity is available at the following internet address: https://www.horizonhobby.com/content/support-render-compliance. NOTE: This product contains batteries that are covered under the 2006/66/EC European Directive, which cannot be disposed of with normal household waste. Please follow local regulations. Wireless Frequency Range and Wireless Output Power: Transmitter: 24022478MHz 17.7 dBm Receiver: 24042476MHz 5.58dBm EU Manufacturer of Record: Horizon Hobby, LLC 2904 Research Road Champaign, IL 61822 USA EU Importer of Record: Horizon Hobby, GmbH Hanskampring 9 22885 Barsbüttel Germany WEEE NOTICE: This appliance is labeled in accordance with European Directive 2012/19/EU concerning waste of electrical and electronic equipment (WEEE). This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling. TENACITY-DB PRO RTR, AVC: 1:10 4WD DESERT BUGGY · INSTRUCTION MANUAL 9 REPLACEMENT PARTS // TEILELISTE // LISTE DES PIÈCES DE RECHANGE // ELENCO DEI RICAMBI Part # LOS230070 LOS230071 LOS230072 LOS231026 LOS231027 LOS231030 LOS231031 LOS231033 LOS231041 LOS231054 LOS231055 LOS231056 LOS231057 LOS232023 LOS232024 LOS232025 LOS232026 LOS232027 LOS232028 LOS232029 LOS232030 LOS232031 LOS232032 LOS232033 LOS232034 LOS233011 LOS233013 LOS233014 LOS233015 LOS233025 LOS233026 LOS233027 LOS233028 LOS234016 LOS234017 LOS234018 LOS234019 LOS234020 LOS234021 LOS234023 LOS234035 LOS234036 LOS234037 LOS235011 LOS235012 LOS235024 LOS235025 LOS235026 LOS235027 LOS236000 LOS236001 LOS237000 LOS237001 LOSA6955 LOS43026 LOSA3575 LOSA3577 LOSA6940 SPM2340 SPMS614S SPMSR6200A SPMXSE1130 SPMXSM1000 English Deutsch Français Italiano Body Set, Lucas Oil Body Set, FOX Racing Body Clip Leash(4) Karosseriesatz, Lucas-Öl Karosseriesatz, FOX Racing Gehäuseklemme Schnur (4) Ensemble carrosserie, Lucas Oil Ensemble carrosserie, FOX Racing Laisse de clip de carrosserie (4) Set carrozzeria, Lucas Oil Set carrozzeria, FOX Racing Laccio per clip per carrozzeria (4) Steer BellcrankSet Steer Pst/Tubes&HDWE Chassis Support Set Steuerungsumlenkhebelsatz Lenkungsteile/Schläuche und Hardware Karosserieträgersatz Ensemble levier coudé de direction Colonne/tubes de direction et accessoires Ensemble support de châssis Set squadrette sterzo Montanti/tubi e ferramenta sterzo Set supporti telaio Motor Mount SteeringDragLink&Hdwe Roll Cage Set Motorhalterung Lenkzwischenstange und Hardware Überrollkäfig-Set Support moteur Barre de d'accouplement de direction et accessoires Ensemble de cage de retournement Supporto motore Set tirante long. sterzo e ferramenta Set scocca di sicurezza Battery Mount Set Side Guar,Alum Chas Aluminum Chassis Akkuhalterungssatz Seitenschutz, Aluminiumchassis Aluminiumchassis Ensemble support de batterie Protection latérale, châssis en aluminium Châssis en aluminium Set supporto batteria Paracolpi laterali, telaio in alluminio Telaio in alluminio Rod Ends & Links Diff Case Set CenterDrive Coupler Stangenende und Verbindungen Differentialgehäusesatz Zentrale Antriebskupplung Embouts de bielle et liaisons Ensemble boîtier de différentiel Accouplement d'entraînement central Testa di biella e asta di collegamento Set scatola diff. Acc. albero trasm. centrale 40T SpurGear,Mod 1 Diff Housing FrRing&PinGearSet 40T Stirnrad, Mod 1 Diffentialgehäuse Vorderes Hohlrad- und Stiftsatz Roue droite cylindrique 40T, mod. 1 Logement différentiel Ensemble pignon et anneau avant Corona 40T, Mod 1 Alloggiamento diff. Set ingr. e corona pignone ant. R Ring&PinGearSet DiffGearSet w/Hardware Outdrive, Diff (2) Hinterer Hohlrad- und Stiftsatz Differentialgetriebesatz mit Hardware Flexwelle, Diff (2) Ensemble pignon et anneau arrière Set ingr. e corona pignone post. Ensemble engrenage différentiel avec accessoires Set ingr. diff. con accessori Entraînement extérieur, différentiel (2) Outdrive, diff.(2) Wheel Hex Set (4) Fr/R Driveshafts(2) FRCenter Dogbone(1) Sechskantradsatz (4) Vordere/Hintere Antriebswellen (2) Vorderes, mittiges Dogbone (1) Ensemble d'hexagone de roue (4) Arbres de transmission avant/arrière (2) Dogbone central avant (1) Set trascinatori esagonali (4) Albero trasm. ant./post. (2) Dogbone centrale ant. R Center Dogbone(1) Shock Plastics Set Spring Set Hinteres, mittiges Dogbone (1) Kunststoff-Stoßdämpfersatz Federnsatz Dogbone central arrière (1) Ensemble plastiques d'amortisseur Ensemble ressort Dogbone centrale post. Set plastiche ammortizzatori Set molle RearShockShaft(2) FrontShockShaft(2) Adjuster Nut Hintere Kolbenstange (2) Vordere Kolbenstange (2) Einstellmutter Bras d'amortisseur arrière (2) Bras d'amortisseur avant (2) Écrou d'ajustement Albero amm. post. (2) Albero amm. ant. (2) Dado di registrazione Aluminum Shock Caps Alum Frt Sh Bodies Alum Rr Sh Bodies Aluminium Stoßdämpferkappen Aluminium Vordere Welle Aluminium Hintere Welle Capuchons d'amortisseur en aluminium Corps d'amortisseur avant en aluminium Corps d'amortisseur arrière en aluminium Tappi amm. in alluminio Corpi amm. in alluminio ant. Corpi amm. in alluminio post. Front Arm Set Rear Arm Set FR Spndl&Carrier St Vorderarmsatz Hinterarmsatz Vorderer/Hinterer Spindel- und Trägersatz Ensemble bras avant Ensemble bras arrière Ensemble axe et support avant Set braccio anteriore Set braccio posteriore Set fuselli e portafuselli ant. FR/R PinMntCover St Rear Hubs Set Hingepin&KingpinSet Vorderer/Hinterer Stift Halterungsabdeckungssatz Ensemble cache de support de broche avant/arrière Set coperture con fiss. a perni Hinterradnabensatz Ensemble moyeux arrière Set mozzi posteriori Scharnierstift- und Sattelzapfen-Satz Ensemble axe de charnière et pivot d'articulation Set perni di fuso e cerniera PivotPinMntSt,Steel(4) Alum Frt Shock Tower Alum Rr Shock Tower Drehzapfen Halterungssatz, Stahl (4) Vordere Stoßdämpferbrücke, Aluminium Hintere Stoßdämpferbrücke, Aluminium Ensemble support de pivot, acier (4) Tour d'amortisseur avant en aluminium Tour d'amortisseur arrière en aluminium Set montaggio perni girevoli, acciaio (4) Torre amm. alluminio, ant. Torre amm. alluminio, post. Sway Bar Set Set Screws M3x3mm Cup Point(10) Set Screws M4x4mm Cup Point(10) Schwingen-Set Ensemble barre stabilisatrice Set barra antirollio Stellschrauben M3 x 3 mm Ringschneide (10) Vis de fixation M3 x 3 mm Bout cuvette (10) Set viti bombate, M3 x 3 mm (10) Stellschrauben M4 x 4 mm Ringschneide (10) Vis de fixation M4 x 4 mm Bout cuvette (10) Set viti bombate, M4 x 4 mm (10) Button Head Screws M3x25mm (10) Rundkopfschrauben, M3 x 25 mm (10) Vis à tête bombée M3 x 25 mm (10) Viti a testa tonda, M3 x 25 mm (10) Button Head Screws M3x30mm (10) Rundkopfschrauben, M3 x 30 mm (10) Vis à tête bombée M3 x 30 mm (10) Viti a testa tonda, M3 x 30 mm (10) Set Screws,M3 x 4mm CupPoint(10) Stellschrauben, M3 x 4 mm Ringschneide (10) Vis de fixation, M3 x 4 mm Bout cuvette (10) Set viti bombate, M3 x 4 mm (10) Set Screws,M3x10mm CupPoint(10) E-Clips 2.5mm (12) 3.2mm x 7mmx .5mm Washer(10) Stellschrauben, M3 x 10 mm Ringschneide (10) Vis de fixation, M3 x 10 mm Bout cuvette (10) Set viti bombate, M3 x 10 mm (10) E-Klemmen, 2,5 mm (12) Attaches en E 2,5 mm (12) E-Clip, 2,5 mm (12) 3,2 mm x 7 mm x 0,5 mm Unterlegscheibe(10) Rondelle 3,2 mm x 7 mm x 5 mm (10) Rondella 3,2 mm x 7 mm x 0,5 mm (10) 12x18x4mm Ball Bearing (4) 10x15x4mm Ball Bearing (4) 5x11x4mm Ball Bearing (4) 12 x 18 x 4 mm Kugellager (4) 10 x15 x 4 mm Kugellager (4) 5 x 11 x 4 mm Kugellager (4) Roulement à billes 12 x 18 x 4 mm (4) Roulement à billes 10 x 15 x 4 mm (4) Roulement à billes 5 x 11 x 4 mm (4) Cuscinetti a sfera 12x18x4 mm (4) Cuscinetti a sfera 10x15x4 mm (4) Cuscinetti a sfera 5x11x4 mm (4) Method Whl w/Falken Tire 1.0 Module Pitch Pinion,15T 1.0 Module Pitch Pinion,17T Method-Räder mit Falken-Reifen 1.0 Modul Getrieberad, 15T 1.0 Modul Getrieberad, 17T Roue Method avec pneu Falken Pignon de pas de module 1.0, 15T Pignon de pas de module 1.0, 17T Ruote Method con pneumatici Falken Pignone passo modulo 1.0, 15T Pignone passo modulo 1.0, 17T 6x12mm Sealed Ball Bearing (4) DX3 3CH DSMR Radio 15KG Servo, WP, Metal Center Case 23T 6 x 12 mm abgedichtetes Kugellager (4) Roulement à billes hermétique 6 x 12 mm (4) Cuscinetto a sfera sigillato 6x12 mm (4) DX3 DSMR-Funkgerät mit 3 Kanälen Radio DSMR 3 canaux DX3 Radio DX3 3Ch DSMR 15 kg Servo, WP, zentrales Metallgehäuse 23T Servo 15KG, WP, Métal. Boîtier 23T Servo 15KG, WP, custodia cent. in metallo 23T SR6200A 6 Ch AVC/Telemetry Surface SR6200A AVC Telemetrie Receiver Oberflächenempfänger mit 6 Kanälen Firma SMART 130A Brushless ESC Firma SMART 130 A bürstenloser Geschwindigkeitsregler Firma 3150Kv Brushless Motor Firma 3150 kV bürstenloser Motor Tele Surf RX/AVC 6 canaux SR6200A ESC sans balais 130 A SMART Firma Moteur sans balais 3150 Kv Firma RX di superficie SR6200A 6 Ch AVC/ Telemetria ESC Brushless Firma SMART 130A Motore Brushless Firma 3150 Kv 34 TENACITY-DB RTR, AVC: 1:10 4WD DESERT BUGGY · INSTRUCTION MANUAL REPLACEMENT PARTS // TEILELISTE // LISTE DES PIÈCES DE RECHANGE // ELENCO DEI RICAMBI Part # TLR235007 TLR255008 TLR255013 TLR256005 TLR336005 TLR5901 TLR5902 TLR5903 TLR5904 TLR5905 TLR5908 TLR5909 TLR5910 TLR5911 TLR5914 TLR5932 TLR5933 TLR5963 TLR5964 TLR5965 TLR6313 TLR6352 TLR74008 TLR8202 English Deutsch Flat Head Screw M2.5 x 10mm (10) Flachkopfschraube M2,5 x 10 mm (10) Button Head Screws, M4x16mm (10) Rundkopfschrauben, M4 x 16 mm (10) Flat Head Screws, M4x12mm (10) Flachkopfschrauben, M4 x 12 mm (10) Nylock Nut, M4 (10) M3 Flanged Alum Locknuts Blk(10) Button Hd Screws, M3 x 6mm (10) Nylock-Mutter, M4 (10) M3 Aluminium-Sicherungsmuttern mit Flansch, schwarz (10) Rundkopfschrauben, M3 x 6 mm (10) Button Hd Screws, M3 x 8mm (10) Button Hd Screws, M3 x 10mm (10) Button Hd Screws, M3 x 12mm (10) Rundkopfschrauben, M3 x 8 mm (10) Rundkopfschrauben, M3 x 10 mm (10) Rundkopfschrauben, M3 x 12 mm (10) Button Hd Screws, M3 x 18mm (10) Rundkopfschrauben, M3 x 18 mm (10) Button Hd Screws, M3 x 44mm (4) Rundkopfschrauben, M3 x 44 mm (4) Button Head Screws, M3x16mm(10) Rundkopfschrauben, M3 x 16 mm (10) Button Head Screws M3 x 14mm(10) Rundkopfschraube, M3 x 14 mm (10) Button Head Screws,M3 x 20mm(10) Rundkopfschrauben, M3 x 20 mm (10) Button Head Screws,M2 x 12mm(10) Rundkopfschrauben, M2 x 12 mm (10) Cap Head Screws, M3 x 10mm (10) Cap Head Screws, M3 x 12mm (10) Flathead Screw, M3 x 12mm (10) Inbusschrauben, M3 x 10 mm (10) Inbusschrauben, M3 x 12 mm (10) Flachkopfschraube, M3 x 12 mm (10) Flathead Screw, M3 x 16mm (10) Flathead Screw, M3 x 20mm (10) Locknut, M3 x .5 x 5.5mm (10) Flachkopfschraube, M3 x 16 mm (10) Flachkopfschraube, M3 x 20 mm (10) Kontermutter, M3 x 0,5 x 5,5 mm (10) Washers, M3 (10) Silicone Shock Oil, 35 Wt, 2 Oz Body Clips, Black (12) Unterlegscheiben, M3 (10) Stoßdämpfer-Silikonöl, 35 wt, 59 ml (2 oz) Gehäuseklemmen, schwarz (12) Français Italiano Vis à tête plate M2,5 x 10 mm (10) Vis à tête bombée, M4 x 16 mm (10) Vis à tête plate, M4 x 12 mm (10) Viti a testa piana, M2.5 x 10 mm (10) Viti a testa tonda, M4 x 16 mm (10) Viti a testa piana, M4 x 12 mm (10) Contre-écrou Nylock, M4 (10) Contre-écrous M3 en aluminium à collet, noirs (10) Vis à tête bombée, M3 x 6mm (10) Dado Nylock, M4 (10) Controdado flangiato allum. M3, nero (10) Viti a testa tonda, M3 x 6mm (10) Vis à tête bombée, M3 x 8mm (10) Vis à tête bombée, M3 x 10mm (10) Vis à tête bombée, M3 x 12mm (10) Viti a testa tonda, M3 x 8 mm (10) Viti a testa tonda, M3 x 10mm (10) Viti a testa tonda, M3 x 12mm (10) Vis à tête bombée, M3 x 18mm (10) Vis à tête bombée, M3 x 44mm (4) Vis à tête bombée, M3 x 16 mm (10) Viti a testa tonda, M3 x 18mm (10) Viti a testa tonda, M3 x 44mm (4) Viti a testa tonda, M3 x 16 mm (10) Vis à tête bombée, M3 x 14 mm (10) Vis à tête bombée, M3 x 20mm (10) Vis à tête bombée, M2 x 12 mm (10) Viti a testa tonda, M3 x 14 mm (10) Viti a testa tonda, M3 x 20mm (10) Viti a testa tonda, M2 x 12mm (10) Vis d'assemblage creuses, M3 x 10mm (10) Viti a testa cilindrica, M3 x 10mm (10) Vis d'assemblage creuses, M3 x 12mm (10) Viti a testa cilindrica, M3 x 12mm (10) Vis à tête plate, M3 x 12mm (10) Viti a testa piana, M3 x 12 mm (10) Vis à tête plate, M3 x 16mm (10) Vis à tête plate, M3 x 20mm (10) Contre-écrou M3 x 5 x 5,5 mm (10) Viti a testa piana, M3 x 16mm (10) Viti a testa piana, M3 x 20mm (10) Controdadi, M3 x 5 x 5,5 mm (10) Rondelles, M3 (10) Rondelle, M3 (10) Huile silicone pour amortisseurs, 35 WT, 2 oz Olio di silicone amm. 35 wt, 60 ml (2 oz) Clips de carrosserie, noir (12) Clip carrozzeria, colore nero (12) RECOMMENDED PARTS // EMPFOHLENE TEILE// PIÈCES RECOMMANDÉES // PARTI CONSIGLIATE Part # English Deutsch DYNC3015 Passport P1 mini-AC Input Balance Passport P1 Mini Wechselstrom Ausgleichs- Charger/Discharger und -Entladegerät SPMX50002S50H5 5000mAh 2S 7.4V50CSmartLiPo IC5 5000 mAh 2S 7,4 V 50C Smart LiPo IC5 SPMX50003S50H5 5000mAh 3S 11.1V50CSmartLiPo IC5 5000 mAh 3S 11,1 V 50C Smart LiPo IC5 Français Chargeur/déchargeur mini-entrée c.a. avec équilibrage Passport P1 IC5 LiPo Smart 50C 7,4 V 2S 5000 mAh IC5 LiPo Smart 50C 11,1 V 3S 5000 mAh Italiano Caricatore/scaricatore con bilanciamento in ingresso Passport P1 mini-AC 5000 mAh 2S 7,4 V 50C Smart LiPo IC5 5000 mAh 3S 11,1 V 50C Smart LiPo IC5 OPTIONAL PARTS // OPTIONALE TEILE // PIÈCES OPTIONNELLES // PARTI OPZIONALI Part # DYN2834 DYN5500 DYNT2010 DYNT2030 LOS230053 LOS43011 LOSA3571 LOSA3573 LOSA3576 LOSA3578 LOSA99173 LOSA99174 LOSB3493 SPM6730 SPM6741 SPMSS6230 TLR332014 TLR336000 TLR336001 TLR5062 TLR74006 TLR74010 TLR76000 TLR76004 English Deutsch Français Italiano Startup Tool Set: Metric Anfänger-Werkzeugsatz: Metrisch Magnum Force 2 Motor Spray, 13 oz Magnum Force 2 Motorspray, 368 g Machined Nut Driver Set (4) Metric Set gefräste Steckschlüssel (4) metrisch Jeu d'outils de démarrage : Métrique Set utensili per avvio: metrico Vaporisateur pour moteur Magnum Force 2, 13 onces Spray per motore Magnum Force 2, 385 ml Ensemble de tournevis à écrou usiné (4) Métrique Set di chiavi per dadi lavorate (4), metrico Machined Hex Driver Set (4) Met Body Set, Clear Dsrt Claws Tires w/Foam,Soft (2) Set gefräste Inbusschraubendreher (4) Met Ensemble clé à six pans usinée (4) Métrique Set di chiavi esagonali lavorate (4), metrico Karosseriesatz, farblos Carrosserie, transparente Set carrozzeria, trasparente Desert Claws-Reifen mit Schaumstoff, weich (2) Pneus Desert Claws avec mousse, tendres (2) Ruote Desert Claws con schiuma, morbide (2) 1.0 Module Pitch Pinion,11T 1.0 Module Pitch Pinion,13T 1.0 Module Pitch Pinion,16T 1.0 Modul Getrieberad, 11T 1.0 Modul Getrieberad, 13T 1.0 Modul Getrieberad, 16T Pignon de pas de module 1.0, 11T Pignon de pas de module 1.0, 13T Pignon de pas de module 1.0, 16T Pignone passo modulo 1.0, 11T Pignone passo modulo 1.0, 13T Pignone passo modulo 1.0, 16T 1.0 Module Pitch Pinion,18T Ride Height Gauge Car Stand 1.0 Modul Getrieberad, 18T Höhenmesser Fahrzeugständer Pignon de pas de module 1.0, 18T Jauge de hauteur de course Socle Pignone passo modulo 1.0, 18T Misuratore altezza marcia Supporto automodello Alum Clamping Whl Hex Spektrum Tx Storage Bag DX2E ACTIVE Bluetooth Module Aluminium Klemmrad Sechskant Spektrum Tx Aufbewahrungstasche DX2E ACTIVE Bluetooth-Modul Hexagone de roue de blocage en aluminium Set serraggio ruote esagonale allum. Sac de rangement Spektrum Tx Sacco custodia Tx Spektrum Module Bluetooth DX2E ACTIVE Modulo Bluetooth DX2E ACTIVE S6230 U-T / M-S Digital WP Servo S6230 U-T/M-S Digitaler WP Servo Rear Hex, +0.5mm Width,Alum Hinterer Sechskant, +0,5 mm Breite, Aluminium 4mmAlumSerratedLockNuts,Black(6) 4 mm Aluminium Rändelmutter, schwarz (6) Servo numérique S6230 U-T / M-S WP Servo impermeabile digitale S6230 U-T / M-S Hexagone arrière, +0,5 mm de large, aluminium Hex posteriore, +0,5 mm di larghezza, alluminio Contre-écrous striés en aluminium de 4 mm, noirs (6) Dadi dentellati, 4 mm, alluminio, neri (6) 4mmAlumSerratedLockNuts,Blue(6) Bleeder Shock Caps, Alum (2) Silicone Shock Oil, 30wt, 2oz 4 mm Aluminium Rändelmutter, blau (6) Stoßdämpfer-Entlüfterkappen, Aluminium (2) Stoßdämpfer-Silikonöl, 30 wt, 59 ml (2oz) Contre-écrous striés en aluminium de 4 mm, bleus (6) Dadi dentellati, 4 mm, alluminio, blu (6) Capuchons d'amortisseur avec purgeur, aluminium (2) Tappi di sfiato amm., alluminio (2) Huile silicone pour amortisseurs, 30 WT, 2 oz Olio di silicone amm., 30 wt, 60 ml (2 oz) Silicone Shock Oil, 40 Wt, 2 Oz Tire Glue, Standard TLR Lok, Threadlock, Blue Stoßdämpfer-Silikonöl, 40 wt, 59 ml (2 oz) Reifenklebemittel, Standard TLR Lok, Schraubensicherung, blau Huile silicone pour amortisseurs, 40 WT, 2 oz Olio di silicone amm., 40 wt, 60 ml (2 oz) Colle de pneu, standard Colla pneumatici, standard Verrou TLR, frein-filet, bleu TLR Lok, frenafiletti, blu TENACITY-DB RTR, AVC: 1:10 4WD DESERT BUGGY · INSTRUCTION MANUAL 35 EXPLODED VIEW // EXPLOSIONSZEICHNUNG // VUE ÉCLATÉE DES PIÈCES // VISTA ESPLOSA DELLE PARTI TLR5904 LOS231057 LOS231027 TLR6313 LOS231024 LOS231057 TLR5910 TLR5904 LOS231033 LOS231026 LOS231026 LOS232030 TLR235007 LOS237000 LOS231027 LOS232026 LOS232027 LOS234037 LOS232023 TLR5963 TLR5964 TLR5933 LOS231041 TLR8202 LOS232029 LOS234019 TLR5904 TLR5964 LOS232024 LOSA6955 LOS232023 LOSA6955 LOS232027 LOS232026 LOS237000 LOS232030 TLR5964 LOS231057 TLR6313 TLR5905 LOS234035 TLR5909 LOS231054 LOS231054 TLR5964 LOS234023 TLR5911 LOS234021 LOS231057 TLR6313 TLR5911 LOS231041 LOS234016 TLR5911 TLR255013 TLR255008 LOS232032 LOS234016 LOS234021 LOS234018 LOS237001 LOS234018 LOS235026 LOSA6940 LOS232031 TLR256005 36 TENACITY-DB RTR, AVC: 1:10 4WD DESERT BUGGY · INSTRUCTION MANUAL EXPLODED VIEW // EXPLOSIONSZEICHNUNG // VUE ÉCLATÉE DES PIÈCES // VISTA ESPLOSA DELLE PARTI TLR235007 LOS234036 TLR5911 LOS232030 LOS232023 LOS232026 LOS237000 LOS232028 TLR5965 LOS232023 LOS234037 LOSA6955 LOS232024 LOSA6955 TLR255013 LOS232029 LOS232026 LOS232023 LOS232023 LOS237000 TLR5908 LOS232030 LOS234019 LOS234023 TLR5963 LOS234021 TLR6313 LOS232032 TLR5905 TLR5911 LOS234022 LOS234017 LOS234021 TLR6313 LOS237001 TLR6313 LOS234020 LOSA6940 LOS232031 TLR336000 TENACITY-DB RTR, AVC: 1:10 4WD DESERT BUGGY · INSTRUCTION MANUAL 37 EXPLODED VIEW // EXPLOSIONSZEICHNUNG // VUE ÉCLATÉE DES PIÈCES // VISTA ESPLOSA DELLE PARTI TLR5904 LOS235024 TLR6313 LOS233026 TLR336005 LOSB2906 LOS236000 LOS233027 LOS233028 LOS233025 SPMSR6200 SPMS614S LOS235011 LOS231054t TLR5963 TLR5903 TLR5903 TLR5963 TLR6313 LOS233014 LOS233015 TLR5905 LOS233013 LOS231030 LOS235025 LOS233011 LOS231023 SPMSXE1130 LOS231054 LOS231055 LOS231054 LOS231056 LOS231055 38 TENACITY-DB RTR, AVC: 1:10 4WD DESERT BUGGY · INSTRUCTION MANUAL EXPLODED VIEW // EXPLOSIONSZEICHNUNG // VUE ÉCLATÉE DES PIÈCES // VISTA ESPLOSA DELLE PARTI LOS230070 LOS230071 LOS230070 LOS230071 LOS230045 LOS231041 TLR8202 LOS231041 TLR5911 TLR5909 LOS230070 LOS230071 LOS230070 LOS230071 LOS230070 LOS230071 LOS231041 LOS232023 TLR5901 LOS232033 LOS232026 LOS237000 LOS230070 LOS230071 SPMXSM1000 TLR6352 TLR5932 LOS235012 LOS232029 LOSA3575 LOSA3577 LOS232034 LOS232026 TLR3100 LOS231031 LOS232030 LOS237000 TLR235007 LOS232025 LOS43026 LOS232030 TENACITY-DB RTR, AVC: 1:10 4WD DESERT BUGGY · INSTRUCTION MANUAL 39 WWW.LOSI.COM ©2021 Horizon Hobby, LLC. Losi, Tenacity, Firma, DSM, DSM2, DSMR, AVC, Active Vehicle Control, Dynamite, Passport, DX3, Fuze, IC5 and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. US 9,320,977. US 10,528,060. US 9,930,567. US 10,419,970. US 10,849,013. Other patents pending. Created 6/21 173621 LOS03027V2T1/T2
The Leader in Radio Control | RC Cars, Airplanes, and More
The Leader in Radio Control | RC Cars, Airplanes, and More
Horizon Hobby Service Center
Spektrum RC Transmitters and RC Electronics | Spektrum
The Leader in Radio Control | RC Cars, Airplanes, and MoreThe Leader in Radio Control | RC Cars, Airplanes, and More
The leaders in RC car and truck innovation and design | Losi
RC Cars, RC Trucks, RC Airplanes, and Model Trains at Tower HobbiesHorizon Hobby Compliance Information