Home | Eastbrook Company
User Guide for Vitura models including: 1002B Acrylic Whirlpool Bath, 1002B, Acrylic Whirlpool Bath, Whirlpool Bath, Bath
Vitura Whirlpool Bath 1800 x 800mm with 14 Jets - Single Ended Square
File Info : application/pdf, 10 Pages, 9.71MB
DocumentDocument1002B Corner_instructions ESTBRK Booklet REV 4 -PRINT 1-12.pdf 1 18/01/2021 16:50:04 Troubleshooting Care & Maintenance To maintain the surface finishes, simply wipe occasionally with mild detergent on a so damp cloth. Dry using a so damp cloth, never use abrasive cleaners of chemical household cleaners and avoid contact with concentrated bleach. The products are manufactured to the highest of standards and should require lile or no maintenance. Telephone Helpline: Should you require any technical help in associaon with your product please call: 01452 317 890 with your query. Warranty: 25 years for standard, 30 years for Beauforte For detail warranty informaon, please visit our website: www.eastbrooktrade.com P20 EASTBROOKS Ltd INSTRUCTIONS 1002B Corner_instructions ESTBRK Booklet REV 4 -PRINT 1-12.pdf 2 18/01/2021 16:50:04 Quality Acrylic Baths Manufactured in the UK Corner, Straight and Shaped Baths Installaon Instrucons - Read through the instrucon booklet first before commencing any work. If you are unsure of any aspect of the installaon, we recommend you contact a reputable tradesperson. - Prior to fing your bath, carefully remove all the packaging and film from the bath and examine the bath for damage and suitability of colour match. - Check the panel fit and match prior to installaon. - Any refixing costs or claims for wrong colour match and/or any other fault will not be accepted aer fixing. No claims for the above will be accepted once the bath is fied. Made in UK Installaon Notes 30 Year Guarantee for Beauforte 25 years for Please note, baths shown are for illustraonal purposes only. P2 standard baths P19 1002B Corner_instructions ESTBRK Booklet REV 4 -PRINT 1-12.pdf 3 18/01/2021 16:50:04 Installaon Dates Retailer: Delivery Date: Installaon: Tradesman: Tiles Retailer: Tile Ref: Waste Specificaon: Stop Tap Locaon: Tiles Locaon: Other: Addional notes Installaon ps Leave spare les under the bath Consider distance on panel dimensions against the wall allow depth of le and adhesive when ling install stop taps easily accessible for reach when removing a future bath check all dimensions of copper piping consider age of previous installaon eg Have a spare stop taps prior to installaon P18 P3 1002B Corner_instructions ESTBRK Booklet REV 4 -PRINT 1-12.pdf 4 18/01/2021 16:50:04 Bath Installaon Instrucons Before you start - Before fixing remove ALL protecve covering and examine carefully. The polythene film must be removed in full and the bath checked for any visible damage. - Unpack and check the product is complete and undamaged. - Have the correct tools available. - Please nofy the retailer immediately of any damage or faults. The manufacturer cannot be held responsible for any installaon costs that may arise from damaged or faulty product being installed. The guarantee does not cover impact related damage. Please dispose of all packaging with due regard to the environment. Safety - Handle the bath with care. - This product is heavy and requires two persons to carry. - When drilling walls, check first for hidden pipes and cables. - Use safety eyewear when drilling. - Keep small parts away from children. Tools required Spirit Level Pozi Screwdriver Tape Measure Spanners (17mm & 19mm) Pencil Junior Hacksaw Drill Appropriate Drill Bit *Tools shown not supplied *Ensure drill bit used is suitable for wall surface! P4 Sealant Gun & Sealant 3. Carefully fit the bath panel to the bath by gently pushing the bath panel into place. Ensure that the bath panel is firmly held in place with the bath panel clips. Bath Panel Please note to allow for future access the panel stops/clips are designed to hold the panel not lock it into posion. Addional mbers may be fied to the walls behind the panel and Velcro strips used to further secure the panel neatly and professionally. If required silicon down the walls to create a seal Panel Fings: Components shown below are supplied with the front panel (quanes dependant on panel type). 6 Supplied with thin rimmed bath 2 Panel Clips x6 Front Panel Clips x6 End Panel Clips x4 19mm Self Tapping Screws x6 P17 1002B Corner_instructions ESTBRK Booklet REV 4 -PRINT 1-12.pdf 5 18/01/2021 16:50:05 Panel Installaon Instrucons 1. Please note bath shown without bath supports for illustraon purposes. Top panel clips to be inline with bottom floor clips. Using a cross headed screwdriver secure the bath panel clips to floor and the underside of the bath using the screws provided. Ensure that the panel clips are equally spaced and are in line with each other top to boom and that the clips are marginally proud of the bath rim. [Please note If the bath does not have a mber frame such as on enamel baths) mber can be bonded to the underside using a suitable bonding agent] 2. Using a tape measure carefully measure the bath to which the panel is to be fied. Place some masking tape at both ends of the bath panel and using a pencil carefully mark out the correct sizes required to suit the bath. Using a fine toothed saw, cut the panel to the required sizes. You may wish to clean the cut edges with a fine wet and dry paper. (NOTE! before cung check to ensure the sizes are correct) Masking Tape Pencil Line P16 P2 BINSIDE PAGE Parts provided in Bath Fings 1 2 3 550mm Channels x2 Wall Fixing Brackets x3 19mm Self Tapping Screws x10 4 5 M12 x 120mm Allthreads x 4 6 Please see Page 16 M12 Plasc Feet x4 7 8 9 M8 x 98mm Centre Foot x1 (Corner & L-Shape) Centre Foot Bracket x1 (Corner & L-Shape) M12 Nuts x 12 10 11 12 Trim to suit Installation M8 Nuts x2 (Corner & L-Shape) M12 Plasc Pads x4 13 48mm Screws x6 14 Panel Stop Screws x6 Panel Stops x6 (with rectangular Bath) - We have taken great care to ensure that this product reaches you in perfect condion. However should any parts be damaged or missing please contact your point of purchase. This does not affect your statutory rights. In addion if you require replacement parts your point of purchase will be happy to assist. - You may have addional spare parts, please discard with due regard to the environment. Wall Plugs x6 15 P5 1002B Corner_instructions ESTBRK Booklet REV 4 -PRINT 1-12.pdf 6 18/01/2021 16:50:05 Corner Bath Installaon Instrucons - Read through the instrucon booklet first before commencing any work. If you are unsure of any aspect of the installaon, we recommend you contact a reputable tradesperson. - Prior to fing your bath, carefully remove all the packaging and film from the bath and examine the bath for damage and suitability of colour match. - Check the panel fit and match prior to installaon. - Any refixing costs or claims for wrong colour match and/or any other fault will not be accepted aer fixing. No claims for the above will be accepted once the bath is fied. 5 9 2 1 4 9 12 4 12 11 5 7 10 8 3 5 9 2 1 3 9 Please Note: - Baths should be set at supplied panel height. - The baseboard is encapsulated into the bath. - Half the panel clips supplied should be secured (if possible) to the floor. - Panel clips are not required on double ended baths. - Before the final fixing of the bath, fit tap and waste fings using a suitable sealing compound. When complete place the bath into posion, re-check levels and make any final adjustments necessary. Finally secure the feet to the floor and the wall brackets to the wall. Movement may occur if not fied correctly. - CHECK THAT THE BATH RIM IS LEVEL. P6 P15 1002B Corner_instructions ESTBRK Booklet REV 4 -PRINT 1-12.pdf 7 18/01/2021 16:50:06 Straight Double End Bath Installaon Instrucons - Read through the instrucon booklet first before commencing any work. If you are unsure of any aspect of the installaon, we recommend you contact a reputable tradesperson. - Prior to fing your bath, carefully remove all the packaging and film from the bath and examine the bath for damage and suitability of colour match. - Check the panel fit and match prior to installaon. - Any refixing costs or claims for wrong colour match and/or any other fault will not be accepted aer fixing. No claims for the above will be accepted once the bath is fied. oses only. P14 Corner Bath Installaon Instrucons 5 4 12 3 9 2 1 9 12 4 6 6 11 5 3 7 10 3 8 5 3 9 2 1 9 4 12 6 6 6 6 4 12 Please Note: - Baths should be set at supplied panel height. - The baseboard is encapsulated into the bath. - Half the panel clips supplied should be secured (if possible) to the floor. - Before the final fixing of the bath, fit tap and waste fings using a suitable sealing compound. When complete place the bath into posion, re-check levels and make any final adjustments necessary. Finally secure the feet to the floor and the wall brackets to the wall. Movement may occur if not fied correctly. - CHECK THAT THE BATH RIM IS LEVEL. P7 1002B Corner_instructions ESTBRK Booklet REV 4 -PRINT 1-12.pdf 8 18/01/2021 16:50:06 Rectangular Bath Installaon Instrucons - Read through the instrucon booklet first before commencing any work. If you are unsure of any aspect of the installaon, we recommend you contact a reputable tradesperson. - Prior to fing your bath, carefully remove all the packaging and film from the bath and examine the bath for damage and suitability of colour match. - Check the panel fit and match prior to installaon. - Any refixing costs or claims for wrong colour match and/or any other fault will not be accepted aer fixing. No claims for the above will be accepted once the bath is fied. 25 P8 Image shown of thin rimmed Panel Clips. 4 12 4 12 11 5 5 3 9 7 2 10 1 4 8 12 9 6 6 3 6 6 6 6 6 6 Please Note: - Baths should be set at supplied panel height. - The baseboard is encapsulated into the bath. - Half the panel clips supplied should be secured (if possible) to the floor. - Before the final fixing of the bath, fit tap and waste fings using a suitable sealing compound. When complete place the bath into posion, re-check levels and make any final adjustments necessary. Finally secure the feet to the floor and the wall brackets to the wall. Movement may occur if not fied correctly. - CHECK THAT THE BATH RIM IS LEVEL. P13 1002B Corner_instructions ESTBRK Booklet REV 4 -PRINT 1-12.pdf 9 18/01/2021 16:50:07 P Shaped Bath Installaon Instrucons - Read through the instrucon booklet first before commencing any work. If you are unsure of any aspect of the installaon, we recommend you contact a reputable tradesperson. - Prior to fing your bath, carefully remove all the packaging and film from the bath and examine the bath for damage and suitability of colour match. - Check the panel fit and match prior to installaon. - Any refixing costs or claims for wrong colour match and/or any other fault will not be accepted aer fixing. No claims for the above will be accepted once the bath is fied. P12 Rectangular Bath Installaon Instrucons 5 3 9 2 1 4 9 12 4 12 2 14 2 2 14 14 11 5 5 3 9 7 2 10 1 8 4 3 12 3 9 2 14 14 4 12 2 2 14 14 Please Note: - Baths should be set at supplied panel height. - The baseboard is encapsulated into the bath. - Half the panel clips supplied should be secured (if possible) to the floor. - Before the final fixing of the bath, fit tap and waste fings using a suitable sealing compound. When complete place the bath into posion, re-check levels and make any final adjustments necessary. Finally secure the feet to the floor and the wall brackets to the wall. Movement may occur if not fied correctly. - CHECK THAT THE BATH RIM IS LEVEL. P9 1002B Corner_instructions ESTBRK Booklet REV 4 -PRINT 1-12.pdf 10 18/01/2021 16:50:07 L-Shape Bath Installaon Instrucons - Read through the instrucon booklet first before commencing any work. If you are unsure of any aspect of the installaon, we recommend you contact a reputable tradesperson. - Prior to fing your bath, carefully remove all the packaging and film from the bath and examine the bath for damage and suitability of colour match. - Check the panel fit and match prior to installaon. - Any refixing costs or claims for wrong colour match and/or any other fault will not be accepted aer fixing. No claims for the above will be accepted once the bath is fied. P10 L-Shape Bath Installaon Instrucons 4 12 3 5 9 2 1 9 4 11 3 5 7 10 8 3 12 5 3 9 2 1 9 4 12 4 12 2 2 6 2 2 6 2 2 6 6 6 6 6 Please Note: - Baths should be set at supplied panel height. - The baseboard is encapsulated into the bath. - Half the panel clips supplied should be secured (if possible) to the floor. - Before the final fixing of the bath, fit tap and waste fings using a suitable sealing compound. When complete place the bath into posion, re-check levels and make any final adjustments necessary. Finally secure the feet to the floor and the wall brackets to the wall. Movement may occur if not fied correctly. - CHECK THAT THE BATH RIM IS LEVEL. P11