Adjustable Seam Guide
Model: 795-806-113
Instructions for Use
Safety First: Before changing any attachments, turn off the power switch. Loosen the thumb screw (A) and insert the bar (B) into the holes as shown.
[Illustration: Thumb screw (A) loosened, bar (B) inserted into holes.]
Turn off the power switch and lower the presser foot. Loosen the setscrew (C) and insert the bar (B) into the foot holder (D). Firmly tighten the setscrew (C).
[Illustration: Presser foot lowered. Setscrew (C) loosened, bar (B) inserted into foot holder (D). Setscrew (C) tightened.]
Align the guide (E) with the seam, the edge of the fabric or marking on the needle plate. Firmly tighten the thumb screw (A).
[Illustration: Guide (E) aligned with seam/fabric edge/needle plate marking. Thumb screw (A) tightened.]
Loosen the thumb screw (F) and set the guide (E) in a suitable position by moving it forward or back. Set it:
- Shorter, when guiding the seam.
- Longer, when guiding the cloth.
[Illustration: Thumb screw (F) loosened, guide (E) moves forward/backward. Adjustment options: shorter for seam, longer for cloth.]
Firmly tighten the thumb screw (F).
Turn on the power switch.