MEAN WELL Switching Power Supply ManufacturerInstallation Manual-MEAN WELL Switching Power Supply ManufacturerProduct Liability Disclaimer-MEAN WELL Switching Power Supply Manufacturer
Installation Guide for MEAN WELL models including: HLG-600H-24B LED Driver, HLG-600H-24B, LED Driver, Driver
MEANWELL HLG-600H-24B HLG-600H-24B Driver LED | MT Distribuzione Srl
File Info : application/pdf, 8 Pages, 747.14KB
DocumentDocumentH L G - 6 0 0 H 600W Constant Voltage + Constant Current LED Driver
series
User's Manual
IP65 IP67
05
for 24A,36A,48A,54A only
(AB type except )
Metal housing with class I design Standby power consumption <0.5W at remote off
·
current output. HLG-600H operates from 90305VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 96%, with the fanless design, the entire series is able to operate for -40 ~ +90 case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-600H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.
B
AB
I
I
I
File Name:HLG-600H-SPEC 2023-12-22
H L G - 6 0 0 H 600W Constant Voltage + Constant Current LED Driver
series
SPECIFICATION
MODEL
HLG-600H-12 HLG-600H-15 HLG-600H-20 HLG-600H-24 HLG-600H-30 HLG-600H-36 HLG-600H-42 HLG-600H-48 HLG-600H-54
OUTPUT
DC VOLTAGE
12V
15V
20V
24V
30V
36V
42V
48V
54V
CONSTANT CURRENT REGION Note.4 6 ~12V
7.5 ~ 15V 10 ~ 20V 12 ~ 24V 15 ~ 30V 18 ~ 36V 21 ~ 42V 24 ~ 48V 27 ~ 54V
RATED CURRENT
40A
36A
28A
25A
20A
16.7A
14.3A
12.5A
11.2A
RATED POWER
480W
540W
560W
600W
600W
601.2W
600.6W
600W
604.8W
RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p 250mVp-p 250mVp-p 350mVp-p
VOLTAGE ADJ. RANGE
Adjustable for A-Type only (via built-in potentiometer) 10.2 ~ 12.6V 12.7 ~ 15.8V 17 ~ 21V 20.4 ~ 25.2V 25.5 ~ 31.5V 30.6 ~ 37.8V 35.7 ~ 44.1V 40.8 ~ 50.4V 45.9 ~ 56.7V
CURRENT ADJ. RANGE
Adjustable for A-Type only (via built-in potentiometer) 20 ~ 40A 18 ~ 36A 14 ~ 28A 12.5 ~ 25A 10 ~ 20A
8.3 ~ 16.7A 7.1 ~ 14.3A 6.2 ~ 12.5A 5.6 ~ 11.2A
VOLTAGE TOLERANCE Note.3 ±3.0%
±2.0%
±1.5%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
LINE REGULATION
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
LOAD REGULATION
±2.0%
±1.5%
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
SETUP, RISE TIME Note.6 500ms, 80ms/ 115VAC, 230VAC
HOLD UP TIME (Typ.)
15ms / 115VAC, 230VAC
VOLTAGE RANGE
90 ~ 305VAC 127 ~ 431VDC Note.5 (Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF0.98/115VAC, PF0.95/230VAC, PF0.93/277VAC @ full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
TOTAL HARMONIC DISTORTION THD< 20% (@ load50% /115VAC, 230VAC; @ load75%/277VAC) (Please refer to "TOTAL HARMONIC DISTORTION (THD)" section)
INPUT
EFFICIENCY (Typ.)
230VAC 92% 277VAC 92.5%
93.5% 93.5%
94.5% 94.5%
95% 95%
95% 95%
95.5%
96%
95.5%
96%
96% 96%
96% 96%
AC CURRENT (Typ.)
7A / 115VAC 3.3A / 230VAC 2.9A / 277VAC
INRUSH CURRENT(Typ.)
COLD START 70A(twidth=1000s measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER
1 unit (circuit breaker of type B) / 2 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.75mA / 277VAC
STANDBY POWER CONSUMPTION <0.5W at remote off
OVER CURRENT
Note.4 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed
PROTECTION SHORT CIRCUIT OVER VOLTAGE
Constant current limiting, recovers automatically after fault condition is removed 13 ~ 16V 16.5 ~ 20.5V 22 ~ 26V 26 ~ 30V 32.5 ~ 36.5V 39.5 ~ 43.5V 46 ~ 50V Shut down o/p voltage, re-power on to recover
52.5 ~ 56.5V 59 ~ 63V
OVER TEMPERATURE
Shut down o/p voltage, re-power on to recover
REMOTE ON/OFF CONTROL Power on : "High" >2 ~ 5V or Open circuit Power off : "Low" <0 ~ 0.5V or Short circuit
FUNCTION 5V STANDBY
5VSB : 5V@0.5A ; tolerance ±5%, ripple : 100mVp-p(max.)
WORKING TEMP.
Tcase= -40 ~ +90 (Please refer to "OUTPUT LOAD vs TEMPERATURE" section)
MAX. CASE TEMP.
Tcase= +90
ENVIRONMENT
WORKING HUMIDITY STORAGE TEMP., HUMIDITY
20 ~ 95% RH non-condensing -40 ~ +85, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT
±0.03%/ (0 ~ 55)
VIBRATION
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
UL60950-1, UL8750(type"HL"), CSA C22.2 No. 250.13-12, ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent,
SAFETY &
EMC (Note 10)
SAFETY STANDARDS Note.7 BS EN/EN62384, IP65 or IP67, J61347-1, J61347-2-13, GB19510.1,GB19510.14, EAC TP TC 004,
AS/NZS 60950.1(by CB)(AB type except ),KC61347-1, KC61347-2-13(for 24A,36A,48A,54A only) approved
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH
EMC EMISSION
Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@ load50%) ; BS EN/EN61000-3-3, EAC TP TC 020; Note.7 GB/T17743,GB17625.1, KC KN15, KN61547(for 24A,36A,48A,54A only)
OTHERS NOTE
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, BS EN/EN55024, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV), EAC TP TC 020; KC KN15, KN61547(for 24A,36A,48A,54A only)
MTBF
913.4K hrs min. Telcordia SR-332 (Bellcore) ; 76.9K hrs min. MIL-HDBK-217F (25)
DIMENSION
280*144*48.5mm (L*W*H)
PACKING
3.9Kg; 4pcs/16.6Kg/0.9CUFT
http://www.meanwell.com)
For any application note and IP water proof function installation caution, please refer our user manual before using.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf https://www.meanwell.com/serviceDisclaimer.aspx File Name:HLG-600H-SPEC 2023-12-22
H L G - 6 0 0 H 600W Constant Voltage + Constant Current LED Driver
series
BLOCK DIAGRAM
EMI FILTER
I/P
&
RECTIFIERS
FG
PFC CIRCUIT
POWER SWITCHING PWM CONTROL
POWER SWITCHING
PFC CONTROL
O.L.P.
PWM & PFC CONTROL
+5VSB DETECTION
CIRCUIT
RECTIFIERS &
FILTER
RECTIFIERS &
FILTER
fosc : 100KHz(5V) 70KHz(12V~54V)
O.L.P.
DETECTION CIRCUIT
O.V.P.
PS/ON CONTROL
+5VSB
+V -V DIM+ DIM(B Type)
PS/ON
DRIVING METHODS OF LED MODULE
This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.
100
(A) Constant Voltage area
(B) Constant Current region
In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL.
Vo(%)
50
100
Io (%)
Typical output current normalized by rated current (%)
File Name:HLG-600H-SPEC 2023-12-22
H L G - 6 0 0 H 600W Constant Voltage + Constant Current LED Driver
series
DIMMING OPERATION
FG (Green/Yellow)
AC/L(Brown) AC/N(Blue)
HLG-600H
RC+(Brown) RC- & GND(Black) +5VSB(Yellow)
DIM+(Purple) DIM-(Pink) -V(Black) +V(Red) -V(Black) +V(Red)
3 in 1 dimming function (for B/AB-Type) Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:
0 ~ 10VDC, or 10V PWM signal or resistance. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 100A (typ.)
Applying additive 0 ~ 10VDC
100%
90%
+V +
80%
+
70%
Output current (%)
-V
-
60%
-
50%
DIM+ +
40%
Additive Voltage
30%
-
20%
DIM-
10%
"DO NOT connect "DIM- to -V"
0% 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
Dimming input: Additive voltage
Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):
+V +
+
-V
-
DIM+
Additive PWM signal
DIM-
"DO NOT connect "DIM- to -V"
Output current (%)
100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input
Applying additive resistance:
100%
90%
+V +
80%
+
70%
Output current (%)
-V DIM+
-
60%
50%
40%
Additive Resistance
30%
DIM-
20%
10%
"DO NOT connect "DIM- to -V"
0% Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N
(N=driver quantity for synchronized dimming operation)
Note : 1. Min. dimming level is about 6% and the output current is not defined when 0%< Iout<6%.
Dimming input: Additive resistance
2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle.
File Name:HLG-600H-SPEC 2023-12-22
H L G - 6 0 0 H 600W Constant Voltage + Constant Current LED Driver
series
OUTPUT LOAD vs TEMPERATURE
100
100
80
80
LOAD (%)
60
60
40
40
20
20
-40 -25 -10
0
15
30
50 55 60
70 (HORIZONTAL)
AMBIENT TEMPERATURE,Ta ()
If HLG-600H operates in constant current mode with the rated current, the maximum workable Ta is 55.
-40 -25 0
20
45
55
65
75
90 (HORIZONTAL)
Tcase ()
LOAD (%)
LOAD (%)
STATIC CHARACTERISTICS
100 90 80 70 60 50 40
90 115 125 135 145 155 165 175 180 200 230 305
INPUT VOLTAGE (V) 60Hz
De-rating is needed under low input voltage.
TOTAL HARMONIC DISTORTION (THD)
48V Model, Tcase at 80
16
14
12
10
8
6
4
2
0
50%
60%
70%
80%
LOAD
277VAC 230VAC 115VAC
90%
100%
PF
EFFICIENCY (%)
POWER FACTOR(PF) CHARACTERISTIC
Tcase at 80
Constant Current Mode
1.00
0.98
0.96
0.94
0.92
0.90
277V
0.88
230V
0.86
115V
0.84
0.82
0.80
0.78
50%
60%
70%
80%
90%
100%
LOAD
(600W)
EFFICIENCY vs LOAD
HLG-600H series possess superior working efficiency that up to 96% can be reached in field applications. 48V Model, Tcase at 80
100
98
96
94
92
277V
230V
90
115V
88
86
84 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
LOAD
File Name:HLG-600H-SPEC 2023-12-22
THD(%)
H L G - 6 0 0 H 600W Constant Voltage + Constant Current LED Driver
series
LIFETIME
LIFETIME(Kh)
120
100
80
60
40
20
0
20
30
40
50
60
70
80
90
Tcase ( )
File Name:HLG-600H-SPEC 2023-12-22
H L G - 6 0 0 H 600W Constant Voltage + Constant Current LED Driver
series
MECHANICAL SPECIFICATION
A-Type
280
13.4
253.2
8.9
Case No. 228 Unit:mm
15
97
FG (Green/Yellow)
300±20
AC/L(Brown)
AC/N(Blue)
SJOW 17AWG×3C & H05RN-F 3×1.0mm2
15
T case tc
47
tc : Max. Case Temperature
25±2
126.6 Io Vo ADJ. ADJ.
144
300±20 UL2517 22AWG×3C SJTW 14AWG×2C
SJTW 14AWG×2C 4.5×4PL LED
RC+(Brown) RC- & GND(Black) +5VSB(Yellow) -V(Black) +V(Red)
-V(Black) +V(Red)
48.5
B-Type
280
13.4
253.2
8.9
15
144
97
FG (Green/Yellow)
300±20
AC/L(Brown)
AC/N(Blue)
SJOW 17AWG×3C & H05RN-F 3×1.0mm2
15
T case tc
47
tc : Max. Case Temperature
25±2
126.6
350±20 300±20 UL2517 22AWG×3C UL2517 18AWG×2C
SJTW 14AWG×2C
SJTW 14AWG×2C 4.5×4PL
RC+(Brown) RC- & GND(Black) +5VSB(Yellow)
DIM+(Purple) DIM-(Pink) -V(Black) +V(Red) -V(Black) +V(Red)
48.5
File Name:HLG-600H-SPEC 2023-12-22
H L G - 6 0 0 H 600W Constant Voltage + Constant Current LED Driver
series
AB-Type
280
13.4
253.2
8.9
15
144
97
FG (Green/Yellow)
300±20
AC/L(Brown)
AC/N(Blue)
SJOW 17AWG×3C & H05RN-F 3×1.0mm2
15
T case tc
47
tc : Max. Case Temperature
25±2
126.6 Io Vo ADJ. ADJ.
350±20 300±20 UL2517 22AWG×3C UL2517 18AWG×2C
SJTW 14AWG×2C
SJTW 14AWG×2C 4.5×4PL
RC+(Brown) RC- & GND(Black) +5VSB(Yellow)
DIM+(Purple) DIM-(Pink) -V(Black) +V(Red) -V(Black) +V(Red)
48.5
Blank-Type
13.4 8.9
280 253.2
15
144
97
FG (Green/Yellow)
300±20
AC/L(Brown)
AC/N(Blue)
SJOW 17AWG×3C & H05RN-F 3×1.0mm2
15
T case tc
47
tc : Max. Case Temperature
25±2
126.6
300±20 UL2517 22AWG×3C SJTW 14AWG×2C
SJTW 14AWG×2C 4.5×4PL LED
RC+(Brown) RC- & GND(Black) +5VSB(Yellow) -V(Black) +V(Red)
-V(Black) +V(Red)
48.5
INSTALLATION MANUAL
Please refer to : http://www.meanwell.com/manual.html
File Name:HLG-600H-SPEC 2023-12-22