Bambu Lab | Unleash Your Creativity with Bambu Lab 3D Printers | Bambu Lab US
User Guide for BAMBU LAB models including: PF002-M A1 Mini Combo 3D Prima, PF002-M, A1 Mini Combo 3D Prima, Combo 3D Prima, 3D Prima, Prima
Imprimante 3D BambuLab A1 mini avec logiciel, caméra intégrée, avec filament – Conrad Electronic Suisse
BambuLab A1 mini 3D Drucker inkl. Software, integrierte Kamera, inkl. Filament – Conrad Electronic Schweiz
File Info : application/pdf, 16 Pages, 2.00MB
DocumentDocumentBambu Lab A1 mini Quick Start Please review the entire guide before operating the printer. * Safety Notice: Do not connect to power until assembly is complete. PF002-M What's In The Box A1 mini Spool Holder Accessory Box Purge Wiper 520mm PTFE Tube Sample Filament Build Plate Quick Start Quick Start Accessory Box Unclogging Pin Tool Allen Key H2 Allen Key H1.5 Heatbed Nozzle Wiper Bambu Scraper Blade Spool Holder Base Spare Filament Cutter (×2) Grease Cable Organizer BT2.6-8 Screw (×2) (For Scraper) M3-8 Screw (×2) (For Spool Holder) M3-12 Screw (×1) (For Purge Wiper) Unlock Remove the 4 screws to unlock the Z-axis limiter. Cut the ziptie wrapped around the toolhead. Remove the foam padding. Lock Heatbed Tighten the 3 screws circled in green to lock the heatbed. Purge Wiper Installation Slide in the Purge Wiper unit into the slot at the end of the X-Axis. Install the 1*M3-12 screw (For Purge Wiper) from the accessory box to fix the Purge Wiper in place. Spool Holder Installation Install the spool holder base plate with the 2*M3-8 screws (For Spool Holder) from the accessory box. Slide in the spool holder. (match the slot orientation) Powering On Plug the power cable and turn on the A1 mini using the power switch on the back. Please leave safety space for heatbed movement. (as shown in the diagram) 390mm Network Setting Follow the instructions untill you see this screen. Press "Select Wi-Fi" to search for available network. Select your preferred network. Input the passcode, and then press "OK". Printer Binding Download the Bambu Handy App. Register and log in to your Bambu Lab account. Use Bambu Handy to scan the QR code on the screen, and bind your printer to your Bambu Lab account. Follow the instructions on the screen to complete the initial calibration. It is normal to have vibration and noise during the calibration process. QR Code External Spool Loading (for non-AMS use case) Connect the toolhead filament inlet (either one of four) and the filament guide with the 520mm PTFE tube as shown in the diagram. Install the organizer as shown in the diagram. Hang filament spool on spool holder then feed the filament line into the PTFE tube as shown in the diagram. First Print Press "Print Files" to access the preloaded models on the SD card. Select the model you want to print. Turn on "Use AMS" if you are using filaments on AMS. Turning on "Bed leveling" is recommended. Turn on "Timelapse" for timelapse video recording. Specification Body Toolhead Item Printing Technology Build Volume (W×D×H) Chassis Hot End Extruder Gears Nozzle Max Hot End Temperature Nozzle Diameter (Included) Nozzle Diameter (Optional) Filament Cutter Filament Diameter Heatbed Speed Compatible Build Plate Max Build Plate Temperature Max Speed of Tool Head Max Acceleration of Tool Head Max Hot End Flow Cooling Supported Filament Sensors Physical Dimensions Part Cooling Fan Hot End Fan MC Board Cooling Fan PLA, PETG, TPU, PVA ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Monitoring Camera Filament Run Out Sensor Filament Odometry Power Loss Recover Filament Tangle Sensor Dimensions (W×D×H) Net Weight Specification Fused Deposition Modeling 180*180*180 mm³ Steel + Extruded Aluminum All-Metal Steel Stainless Steel 300 0.4 mm 0.2 mm, 0.6 mm, 0.8 mm Yes 1.75 mm Bambu Textured PEI Plate Bambu Smooth PEI Plate 80 500 mm/s 10 m/s² 28 mm³/s @ABS (Model: 150*150 mm single wall; Material: Bambu ABS; Temperature: 280 ) Closed Loop Control Closed Loop Control Closed Loop Control Ideal Not Recommended Low Rate Camera (up to1080P) Timelapse Supported Yes Yes Yes Yes 347*315*365 mm³ 5.5 kg Specification Electrical Parameters Electronics Software Wi-Fi Input Voltage Max Power Display Connectivity Storage Control Interface Motion Controller Slicer Slicer Supported OS Frequency Range Transmitter Power (EIRP) Protocol 100-240 VAC, 50/60 Hz 150 W 2.4 inches 320*240 IPS Touch Screen Wi-Fi, Bambu-Bus Micro SD Card Touch Screen, APP, PC Application Dual-Core Cortex M4 Bambu Studio Support third party slicers which export standard Gcode such as SuperSlicer, PrusaSlicer and Cura, but certain advanced features may not be supported. MacOS, Windows 2412 MHz - 2472 MHz (CE) 2412 MHz - 2462 MHz (FCC) 2400 MHz - 2483.5 MHz (SRRC) 21.5 dBm (FCC) 20 dBm (CE/SRRC) IEEE 802.11 b/g/n Enjoy! www.bambulab.com