Boxing Music Machine User Manual
Model: QJ-02
Product Information
Product Parameters
Input voltage: DC5V
Power: 5W
Working voltage: 5V
Packaging size: 41 x 6.8 x 41.5cm
Product net/gross weight: 2kg/2.5kg
Battery capacity: 1800mA
Charging Instructions
When using a music player charger (5V 1A-2A), the device is charged through a wired connection. During charging, a light will illuminate. When fully charged, the light turns green. When installing a music player, ensure it is located close to a wall socket.
[Diagram: Shows a charging port, a switch, and a charging display light.]
Warranty Card
| Product name | User NameUser |
| Address | AddressUser |
| Phone | PhoneSales |
| Outlets | outlets |
Operating Instructions
- Power: Turn on the bottom toggle switch to power the device on or off.
- Bluetooth Connection: Turn on your phone, enable Bluetooth, and connect by searching for the device.
- Light Modes (H01-H09): The gear adjustment cycle increases, and the display window shows H01-H09, indicating that the light is changing faster and faster. The default setting for startup is H01.
- Program Modes (P01-P09): The mode adjustment button displays PO1-P09 in the display window, indicating 9 programs with varying effects. The training areas corresponding to each mode gradually increase in difficulty.
Installation Instructions
- After tearing off the Velcro surface of the accessory, attach the sticker directly to the back of the machine. Pay attention to the parallel direction of the machine when pasting. (See Figure 1)
- Attach the other Velcro sticker with the fur surface directly to the back of the machine, ensuring that the two Velcro stickers are parallel to each side of the machine. (See Figure 2)
- Glue the Velcro needle surface and the rough surface together and locate the corresponding wall position. Note that the distance between the charging port and the socket should not exceed 1.2 meters. (See Figure 3)
- Determine the position, tear off the sticker behind the needle surface, and stick it to the wall surface. (See Figure 4)
[Diagram: Figures 1-4 illustrate the process of attaching Velcro components to the machine and the wall for mounting.]
Precautions
- Can only be used 30 minutes after meals.
- Not suitable for use during pregnancy or menstruation.
- Electronic products cannot be washed with water; they can be wiped with a cloth.
- Timely charge the machine battery after it runs out of power to prevent battery loss.
- Discontinue use immediately when feeling unwell during use.
- It is recommended to wear a boxing case when using it.
- Unauthorized disassembly of products is prohibited.
Warranty Description
This product is guaranteed for one year from the date of purchase. If any malfunction occurs during normal use according to regulations, the warranty period shall be based on the principle of "three guarantees" for the product.
Fault Analysis
| Serial Number | Fault phenomenon | Cause analysis | Exclusion method |
|---|---|---|---|
| 1 | No light or sound | The product is not turned on | Press the bottom switch key |
| 2 | No light or sound | Battery loss | Please charge |
| 3 | Flashing lights | Low battery level | Please charge |
| 4 | Short press of the switch cannot start the machine | Long term failure to power on leads to the drawback of main chip capacity expansion | Please charge |
| 5 | Internal collision sound of equipment | Emitted by internal activities and structures | Normal phenomenon |
FCC Compliance Information
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.