Owner's Manual for DATEQ models including: DDA-48, DDA-48 4 Channel Class D Power Amplifier, 4 Channel Class D Power Amplifier, Class D Power Amplifier, Power Amplifier, Amplifier
DDA-48 - DATEQ
File Info : application/pdf, 1 Pages, 498.79KB
DocumentDocumentDDA-48 MusicAll 4 channel Class D power amplifier DDA-48 4 x 800 W The DDA-48 class-D power amplifier is equipped with a switching powersupply, which features minimum power consump on and high efficiency up to 95%. It saves installa on rack space, generates less heat with a higher life span as a result. Ideal for live performance, permanent installa on and sound reinforcement system. Supports stereo output at 8, 4 & 2 and bridged output 8 & 4. Rated power output 4×800W @8 / 4×1200W @4 / 4x1000W @2. With bridge, parallel & stereo selector on rear panel. In Bridge mode 2x1200W @8, 2x1400W @4. Four inputs by balanced XLR connector. Four outputs by balanced Speakon connector. Technical specifica ons Rated power Bridged output Input impedance | Sensi vity Frequency response Damping factor S/N ra o THD Cooling Indicators Protec on Power supply 4x 800W @8 / 4x 1200W @4 2x 2400W @8 / 2x 2800W @4 20k balanced / 10 k unbalanced 20 Hz ~ 20 kHz (+1 / -1 dB) > 550 (1kHz, 8) > 105 dB <0.05%, 8, 1kHz two internal fans power, protec on, clip & signal peak, short-circuit, overload & high temperature 160 ~ 264 V AC 50 ~ 60 Hz Weight Dimensions (mm) 7,5 kg 484 x 290 x 66 (1,5u rack 19") DATEQ Interna onal B.V. De Paal 37, 1351 JG Almere, Netherlands Tel: + 31 36 5472222 E-mail: info@dateq.nl Internet: www.dateq.nl Chamber of Commerce: 84615559 Bank: IBAN NL 41 RABO 0375260307 Bank swi : RABO NL2U TVA/VAT: NL 863282313B01