Niceboy HIVE DROPS
User Manual / Bluetooth Earphones
Product Description
The product includes the following components:
- 1. LED diode: Indicates status on the earphones.
- 2. Multifunctional button: Used for controls like play/pause, call handling, and voice assistant activation.
- 3. Charging pins: Connect the earphones to the charging case.
- 4. LED charging indicator: Located on the charging case, shows charging status.
- 5. Charging USB-C port: Port on the charging case for power input.
Diagram Description: The diagram illustrates the charging case containing two earbuds. Separate views of the earbuds show the LED diode (1) and the multifunctional button (2). The charging case shows the LED charging indicator (4) and the USB-C port (5). Charging pins (3) are visible on the earbuds.
First Launch and Pairing
- Remove both earphones from their charging box and peel off the stickers protecting the charging pins (3) on the earphones.
- Power on the earphones by pressing and holding the multifunctional buttons (2) on both earphones.
- The earphones will power on and pair with each other. Once the LED diode (1) starts flashing blue and red alternately, the earphones are ready for Bluetooth connection.
- On your device, open Bluetooth settings and select "Niceboy HIVE drops" from the list of available devices.
- Successful pairing is confirmed by an audible prompt and the LED diode (1) flashing blue at longer intervals.
Reconnecting: To reconnect to a previously paired device, simply remove the earphones from the charging box. They will automatically power on and connect to your device.
Powering On and Off
To Power On: Remove the earphones from the charging box. Alternatively, manually power them on by pressing and holding both multifunctional buttons.
To Power Off: Place the earphones back into the charging box. They will automatically power off and disconnect from your device. The earphones are correctly placed when the LED diode (1) on the earphone turns red. If the earphones are 100% charged, the diode will turn off. You can also power off the earphones by pressing and holding both multifunctional buttons (2) for approximately 5 seconds.
Multifunctional Button - Basic Controls
- Double press any button: Play/Pause
- Single press right button: Increase volume by one step, accept/end call
- Single press left button: Decrease volume by one step, accept/end call
- Press and hold right button: Next track, decline incoming call
- Press and hold left button: Previous track, decline incoming call
- Triple press left button: Activate voice assistant (Siri / Google Now)
Charging
To charge the charging box, connect the charging cable to the USB port (5). During charging, the LED indicator (4) will flash. After the box is fully charged, the diode will shine red.
Factory Settings
After placing both earphones into the charging box, press and hold both multifunctional buttons (2) simultaneously until both diodes (1) flash, which takes about 9 seconds. This process resets the earphones to their factory settings.
Specifications
- Bluetooth: 5.0
- Supported Bluetooth profiles: HFP, HSP, A2DP, AVRCP
- Degree of coverage: IPX4
- Transmission distance: 10m
- Frequency: 20Hz - 15kHz
- Sensitivity: 94db ± 3dB
- Speaker: 6mm
- Playback time on one charge: Up to 3 hours
- Earphones battery capacity: 40mAh
- Charging box battery capacity: 300mAh
Package Contents
- Niceboy HIVE drops earphones
- Charging box
- Backup earphone attachments
- USB-C cable
- Manual
