User Manual for SKMEI models including: 1672 Temperature Watch, 1672, Temperature Watch, Watch
Temperature Watch-1672 | SKMEI Watch OEM Factory
SKMEI 1672 Operation Manual FEATURE 24H time display (LED display) body temperature measurement (LED display) Time Display Normal Abnormal Temperature Charging (the left Temperature (the left symbol flash symbol flash) 1Time display quickly) press S key to display the time, it automatically turns off to save electricity when there is no operation. 2Time setting Under the mode of time display , keep pressing S key for 5 seconds to enter the setting of "Hour" then press S key again to modify the number of "hour". Press S key and hold it for 5 seconds again to enter the setting of " minute" then press S key to modify the number of "minute". 3Test the temperature Under the mode of time display, press S key to measure the temperature and the symbol flashes , symbol stop flashing after test finished. Attention: There are 2 abnormal results of measurements when the temperature is out of the range of 32~42.5: LO or HI means it too low temperature or too high temperature to be out of range of measurement. Red light will flash when temperature exceeds 37.5Within range of measurement. Measuring range is 34~42. Results of measurements will be affected individual difference, environment , clothing ,strenuous exercise and other factors . The result are for reference only and cannot be used as a basis for diagnosis . Remarks: Wear your watch for ten minutes before detecting your body temperature; 4Charging Take off wrist band and connect it with USB charging cable Led screen display : On charging : The left symbol flash Full charge : The left symbol stop flashing.WPS 文字