User Guide for BS01

Product Specification

Bluetooth Version: 5.4

Support: HFP / A2DP/AVRCP

Charging Port: Type-C

Battery life: 6-7 hours of use per full charge of both earbuds (actual battery life varies with song type and volume requirements)

Charging time: 1.5 hours for earbuds / 1.5 hours for charging case

Transmission range: 15M meters (without obstacles)

Introduction

This section provides an overview of the BS01 True Wireless Stereo Earphones, detailing the components and their functions.

Components:

• LED Indicator Light: Indicates charging and connection status.
• Charging Contact: Connects the earbuds to the charging case.
• MFB Button: Multi-function button for controlling playback, calls, and voice assistants.

How do I pair two headphones with my phone?

1. Ensure both earbuds and the charging case are fully charged before first use.
2. Take both earbuds out of the charging case. They will power on and start pairing automatically.
3. If the earbuds do not connect to your device within 5 minutes, they will automatically turn off. Press and hold the MFB button for about 3 seconds to manually turn them on.
4. The blue and white lights on the main earbud will flash alternately, and the white light on the secondary earbud will flash every 3 seconds when pairing is successful.
5. Enable Bluetooth on your phone, search for "BS01", and select it to connect. You should hear a "connected" voice prompt.
6. If the earbud indicator light is off, it means the phone is connected.
7. Automatic connection: By default, the earbuds will connect to the last paired phone when powered on.

Tips:

• If you encounter pairing issues, place the earbuds back in the charging case and repeat the steps.
• These earbuds can be used together or individually. To use a single earbud, remove it from the case and connect it to your phone.

Functions

Telephone Communication

• Answer call: Tap once
• Hang up: Press and hold the key for 2s
• Refuse incoming call: Press and hold the key for 2s

For Music

• Play/pause: Tap twice
• Previous track: Press and hold the key for 2s "L"
• Next track: Press and hold the key for 2s "R"
• Activate Siri: Quickly tap for three times
• Turn down volume: Tap once "L"
• Turn up volume: Tap once "R"

Charging

Earbuds Charging

The earbuds will only charge when placed correctly in the charging slots. You can charge the charging case and earbuds simultaneously, or charge the case first, then the earbuds.

The LED indicator light will show blue while charging. It will turn off when fully charged.

When earbuds are charging, the digital display bar of the charging case will blink and turn off when the earphones are fully charged.

Case Charging

Use the included Type-C USB charging cable to charge the case directly. During charging, the digital display will flash and show the battery level in real time. When fully charged, the display shows 100.

Storage and Maintenance

• If the earbuds do not charge or turn on after a period of use due to oxidation of the magnetic connector, clean the connectors with an alcohol cloth.
• If the headphones have not been used for more than 3 months, it is recommended to charge them.
• The earbuds can automatically turn off when placed in the charging case and will turn on and pair automatically when picked up.

Frequently Asked Questions

Q: Why don't these earbuds pair with my phone?
A: Ensure earbuds are fully charged and powered on, and your phone's Bluetooth is enabled. If issues persist, turn off the earbuds after 5 quick clicks, place them in the charging case, wait 1 minute, then open the case and reconnect.

Q: Why does the music cut in or out?
A: Keep earbuds within 10m of your phone. If the distance is less than 10m, place earbuds back in the case, close the lid, forget "BS01" in phone's Bluetooth settings, wait 10 seconds, open the case, and reconnect.

Q: Why the earbuds still won't be charged or disconnect from the phone after I put them in the case and close the lid?
A: Ensure the charging case is not in a low battery state. If it is, charge the case fully using a Type-C cable.

Q: Are these earbuds sweat- and water-resistant?
A: These earbuds are sweatproof and slightly waterproof. Submerging them in water is not recommended.

Activation & Warranty

For permanent replacement of damaged, defective, or missing components, please activate via email within 15 days: amazon.seller9966@gmail.com

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

IC WARNING

English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

French: L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1) L'appareil ne doit pas produire de brouillage; 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Recycling Information

FR: ÉLÉMENTS D'EMBALLAGE À SÉPARER ET À DÉPOSER DANS LE BAC DE TRI

FR: Cet appareil, ses accessoires, cordons et batteries se recyclent

Points de collecte sur www.quefairedemesdechets.fr. Privilégiez la réparation ou le don de votre appareil !

Product Information

FCC ID:WTD-BS01

IC:30650-BS01

HVIN:BS01

MADE IN CHINA

The power delivered by the charger must be between min 0.2 Watts and max 1.65 watts in order to achieve the maximum charging speed.