Matias FK413PCD Wireless PC Keyboard

Charging the Keyboard

Charge the keyboard using a computer's USB port or a USB-C charger. A full charge from empty takes approximately 5 hours and provides up to 3 years of battery life under typical usage.

Embedded Numeric Keypad

Pressing the [numeric keypad] key toggles the embedded numeric keypad on and off.

The Receiver Stays Plugged In

Setup is simple: Plug one of the included Receivers into your computer, then turn on the keyboard. The Receiver remains plugged in, enabling instant wireless reconnections. Its small size makes it ideal for notebook users.

Press the [power button] to turn the keyboard ON or OFF. The Caps Lock indicator light will flash:

• ? Green to indicate ON.
• ? Amber to indicate OFF.

Indicator Lights Explained

Function Keys on PC

The keyboard includes dedicated function keys:

• Fn + F7: Previous track
• Fn + F8: Play / Pause
• Fn + F9: Next track
• Fn + F10: Mute
• Fn + F11: Volume down
• Fn + F12: Volume up

Using with Both Receivers

To use the keyboard wirelessly with two computers, plug one receiver into each computer. When the keyboard is turned ON, it will automatically connect to one of them. To switch the connection to the other receiver, double-click the [power button] on the keyboard.

Also Works as a WIRED Keyboard

If you plug the keyboard into a computer using a cable, it automatically switches to WIRED mode. If you then unplug the cable or press the [power button], it switches back to WIRELESS mode and attempts to connect to one of the wireless receivers.

Unplugging the USB-C Receiver

The wireless USB-C receiver is small and can be difficult to unplug, especially with larger hands. A free Puller tool is included to make this process easy. Simply place the Puller over the receiver, rotate a quarter turn, and pull the two ends together to remove it.

[Description of USB-C receiver and puller tool: A small, compact USB-C dongle for wireless connectivity, accompanied by a specialized tool designed to grip and extract the receiver from a USB port.]

How to Pair to a New Receiver

Your keyboard is pre-paired to the receiver it came with. This process is for pairing to a new replacement receiver or adding more devices.

You can pair any number of Matias keyboards or mice to the same Receiver. This is convenient for users who have multiple workstations (e.g., home and office) and want to use one receiver with their laptop.

1. Unplug any receivers that may be in range of the keyboard.
2. Hold down the [return key], then press the [power button] until the Caps Lock light starts flashing ? Blue.
3. Plug the new Receiver into your computer, then place the keyboard as close as possible to the Receiver.
4. When the indicator light stops flashing, pairing is complete.

Lost Receiver Replacement

Replacement receivers are available. If you have lost a receiver, please contact Matias support at help@matias.ca.

Ergonomics

For information on ergonomics, please visit:

• www.matias.ca/ergo
• www.matias.ca/health
• www.matias.ca/health/1
• www.matias.ca/health/2

Warranty Information

Matias Corporation warrants this product to be free from defects in workmanship and materials for 2 years from the date of original purchase. Matias' sole obligation is to repair or replace the product at its option.

Limitation of Liability: Matias excludes liability for incidental, consequential, indirect, or special damages, including loss of revenue or profits, arising from the use or performance of the product.

The keyboard contains no user-serviceable parts. Do not open, disassemble, crush, or puncture the battery. Dispose of the product and its lithium-ion battery according to local environmental laws.

FCC and IC Compliance

FCC ID: WKM-FK413. This equipment complies with Part 15 of the FCC Rules. It has been tested and found to comply with Class B digital device limits, designed to provide reasonable protection against harmful interference. Operation is subject to two conditions: it must not cause harmful interference, and it must accept any interference received.

IC: 30541-FK413. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: the device may not cause interference, and it must accept any interference, including interference that may cause undesired operation.

The device meets routine evaluation exemption limits in section 2.5 of RSS 102 and complies with RSS-102 RF exposure requirements.

This product complies with the requirements of European Directives 72/23/EEC, 89/336/EEC, and 1999/5/EC.

[Note: The original document contained French translations for the IC compliance section, which have been summarized in English here as per instructions.]

Warranty Procedure

1. Contact the Matias Help Desk at help@matias.ca, (905) 265-8844, or toll-free 1-888-663-4263 with a detailed explanation of the problem.
2. Matias support will attempt to resolve the issue via e-mail or phone.
3. If support is unsuccessful or the item is defective, an EMA (Exchange Merchandise Authorization) number will be provided, along with instructions for returning the product for replacement.
4. For more information, visit www.matias.ca/returns.

Key Programmability

Which keys are programmable? See below; the black keys on the keyboard layout are programmable.

[Diagram Description: A visual representation of the keyboard layout, highlighting specific keys in black to indicate they are programmable.]

Which Fn shortcuts can I program? When combined with the Fn key, the black keys are also programmable as shortcuts.

[Diagram Description: A visual representation of the keyboard layout, showing how the Fn key interacts with the black keys to enable programmable shortcuts.]

Character Limit: Approximately 60 characters can be assigned to a programmable key or shortcut. Note that modifier keys (like Shift) count as 2 characters each (press & release).

How to Program a Key or Shortcut

Program a Programmable Key:

1. Hold down the [esc key] and the desired programmable key. Continue holding until the Caps Lock indicator light starts blinking ? Red.
2. Type your desired sequence of keys.
3. Hold down the [esc key] alone until the Caps Lock indicator light stops blinking, confirming completion.

Program a Shortcut:

1. Hold down the [esc key], the Fn key, and one of the programmable black keys. Continue holding until the Caps Lock indicator light starts blinking ? Red.
2. Type your desired sequence of keys.
3. Hold down the [esc key] alone until the Caps Lock indicator light stops blinking, confirming completion.

[Diagram Description: A visual representation of the keyboard layout, indicating the black keys that can be programmed as shortcuts when used with the Fn key.]

How to Reset Keys and Shortcuts

Reset ALL Keys to Default Functions:

Hold down the [esc key] and the Backspace key until the Caps Lock indicator light blinks ? Red, indicating the reset was successful.

[Diagram Description: A visual representation of the keyboard layout, highlighting the Esc and Backspace keys for a full system reset.]

Reset a Programmable Key to Default:

1. Hold down the [esc key] and the key to be reset. Continue holding until the Caps Lock indicator light starts blinking ? Red.
2. Hold down the [esc key] alone until the Caps Lock indicator light stops blinking, indicating a successful reset.

Reset a Shortcut to Default:

1. Hold down the [esc key], the Fn key, and the key that is part of the shortcut to be reset. Continue holding until the Caps Lock indicator light starts blinking ? Red.
2. Hold down the [esc key] alone until the Caps Lock indicator light stops blinking, indicating a successful reset.