Fisher & Paykel Gas Cooktop CPV3-485GD-L FP US CA Parts Manual
Product Code: 82011-A
Introduction
Brand: Fisher & Paykel
Model: CPV3-485GD-L FP US CA
Voltage: 120VAC 60Hz
Product Code: 82011-A
This manual covers the Fisher & Paykel Gas Cooktop, model CPV3-485GD-L FP US CA. The information provided is subject to change without notice, and the latest version supersedes any earlier editions.
Kit Parts Information
Parts listed with a part number are available as separate items. Some parts included in kits may not be available separately and might not be listed individually.
Parts List Key
- NI: Indicates the part is not illustrated on the diagram.
- NS: Indicates the part reference is not used in this manual or the part is not serviceable.
Contact Information (US CA):
Fisher & Paykel Appliances Inc.
DCS Customer Care
695 Town Center Drive, Suite 180
Costa Mesa, CA 92626-1902
USA
Customer Care: 1-888-936-7872
Fax: (714) 372-7003
Email: customer.care@fisherpaykel.com
Website: www.dcsappliances.com
Sealed Burner Components
Diagrams illustrate the components for Large (4") and Small (3-1/2") sealed burners. Each diagram shows various parts like burner caps, rings, venturi, and bases, with numerical references.
Reference | Part Number | Part Description |
---|---|---|
1 | 210608 | D BURNER CAP |
2 | 210609 | C BURNER CAP |
3 | 248603 | RING 3MM D-PORT DUAL STAGE |
4 | 248602 | RING 3MM C-PORT DUAL STAGE |
5 | 211526 | NUT W/CHAMFER |
6 | 239124 | RING SIMMER D BURNER |
7 | 239123 | RING SIMMER C BURNER |
8 | 210913 | VENTURI W/CHAMBER |
9 | 248978 | D BURNER BASE EVO2 |
10 | 248979 | C BURNER BASE EVO2 |
11 | 217994 | KIT IGNITER SPRING AND CLIP |
NI | 592187 | BK UG CPV3 USCA EN FR |
NI | 592189 | BK INSTALL CPV3 USCA |
Griddle Components
This section details the various components of the griddle assembly. The diagram shows the main griddle plate, trim, flue assembly, igniter, support parts, burner components, fittings, and covers, all identified by reference numbers.
Reference | Part Number | Part Description |
---|---|---|
1 | 247896 | PLATE GRIDDLE W/A 17 INCH |
2 | 248220 | TRIM GRIDDLE 17INCH M/C |
NI | 247073P | MS 10-32 X 3/8 PH PAN SS PKT10 |
3 | 249597 | FLUE ASSY GRIDDLE 17" WA V2 |
4 | 249763 | IGNITER HOT SURFACE GD GL |
5 | 252268 | SUPPORT U BURNER V2 CO |
6 | 243694 | SUPPORT IGNITER BURNER (LH) |
7 | 211306P | MS 8-32 PH PN HD SS (10PK) |
8 | 211480P | NUT 8-32 KEPS SS (10PK) |
9 | 211226P | SM10X1/2 PH TRHD TYASS (PKT 10 |
10 | 211371P | WASHER FLT SS #10 3/4 (10PK) |
11 | 243201 | U BURNER UNITED GD ASSY 17" |
12 | 247747 | CUP GREASE - 17 INCH |
NI | 211226P | SM10 X 1/2 PH TRHD TYASS (10PK) |
13 | 243740P | KIT BALL STUD/CLIP |
Includes | BALL STUD 421-5 | |
Includes | CLIP 8LBS, BALL STUD | |
Includes | RIVET 1/8 X 0.264 SS | |
14 | 243808 | COVER 17" ASSY GRIDDLE |
Includes | COVER GRILL GRIDDLE 17 (X 1) | |
Includes | MS 4-40 X 3/4 PH FLT SS (X 4) | |
Includes | NUT HEX 4-40 SS (X 4) | |
Includes | WASHER #4 EXT TOOTH (X 4) | |
Includes | 245437 | HANDLE COVER 17” (X 2) |
Includes | 247098P | KIT GRILL/GRIDDLE FEET SP |
15 | NS | HOUSING 17" GRIDDLE W/A V2 |
16 | 212139 | FITTING ELBOW 3/8-27 - 9/16-24 |
Includes | NUT 3/4-16 | |
17 | 245089P | KIT J-TUBE RG/CU486GD/364GD/GL |
Includes | LOXIT FITTING FOR 3/8 OD TBNG | |
18 | 210782 | DUAL THERMAL GAS VALVE |
NI | 211238P | SM 10X1/2 SL TD HWH SMS (PKT10) |
19 | 245593 | BRACKET TERMINAL BLOCK |
20 | 210694 | JET SPUD 1.07MM (58DMS) |
21 | 212373 | LOXIT FITTING FOR 3/8 OD TBNG |
22 | 245437 | HANDLE COVER 17" |
23 | 249593 | HOLDER BULB ASSY V2 |
NI | 247098P | KIT GRILL/GRIDDLE FEET SP |
NI | 211396P | NUT KEPS 6-32 ZN (10 PK) |
24 | 242919 | BRACKET IGNITER MTG |
25 | 247634 | BOX 17IN GD |
26 | 248092 | BOX RH ORIFICE 17" GD |
27 | 247635 | BOX ORIFICE 17" GD |
Burner Hanger Components
This section displays the components related to the burner hanger assembly, including the main frame, burner supports, and gas tubing with fittings and jets. The diagram shows the arrangement of these parts with numerical references.
Reference | Part Number | Part Description |
---|---|---|
1 | 243785 | TUBE ASSY SIMMER REAR |
2 | 244853 | TUBING SIMMER FRONT CU-36 |
3 | 244852 | TUBING MAIN FRONT CU-36 |
4 | 243786 | TUBE ASSY MAIN REAR |
5 | 244875 | TUBE MAIN CENTRE CU485 |
6 | 244868 | TUBE SIMMER CENTRE CU485 |
7 | 243909 | TUBE RIGHT FRONT 36 |
8 | 243901P | KIT TUBE SUPPLY RG/CU485GD |
Includes | 212373 | LOXIT FITTING FOR 3/8 OD TBNG |
9 | 249126 | JET HOLDER MAIN 1.24MM |
Includes | 249132 | JET MAIN DCS 1.24MM |
10 | 245996 | JET HOLDER SIMMER ASSY #79 |
Includes | 210573 | JET SIMMER 0.37MM (G) |
11 | 249128 | JET HOLDER MAIN 1.10MM |
Includes | 249135 | JET MAIN DCS 1.10MM |
12 | 249338 | JET HOLDER MAIN 0.95MM |
Includes | 247482 | JET MAIN DCS 0.95MM (63DMS) |
13 | 248777 | HANGER BURNER EVO2 |
14 | 248778 | HANGER 5-BURNER CENTRE |
15 | 211238P | SM 10X1/2 SL TD HWH SMS (PKT10) |
16 | 210468 | NUT M22 JET HOLDER |
17 | 211502 | NUT SIMMER JET HOLDER |
18 | 249842 | TRIVET ASSY 5-BURNER SIDE EVO2 |
Includes | FOOT ASSY BRASS-RUBBER X 4 | |
19 | 249844 | TRIVET ASSY 5-BURNER CNTR EVO2 |
Includes | FOOT ASSY BRASS-RUBBER X4 | |
20 | 249847P | KIT FOOT BRASS-RUBBER (PKT4) |
21 | 212203 | FITTING 1/8 NPT MALE-3/8 CC |
22 | 212373 | LOXIT FITTING FOR 3/8 OD TBNG |
Manifold Components
This section details the manifold components, including the main manifold body, gas valves, regulators, and associated fittings and switches. The diagram illustrates the layout of these parts with numerical references.
Reference | Part Number | Part Description |
---|---|---|
1 | 245666 | MAINS FLEX ASSY |
2 | 255071 | BRACKET IGNITOR MOUNT 3 PT RXX |
3 | 245593 | BRACKET TERM BLOCK |
4 | 211768 | TERMINAL BLOCK |
NI | 211250P | MS10-24X 1PH PN TY F SS (10PK) |
5 | 255605 | TERMINAL BLOCK (2 POSITION) |
NI | 211276P | MS6-32 X 1-1/2PH PN HD SS (10PK) |
NI | 211396P | NUT KEPS 6-32 ZN (10 PK) |
6 | NS | BAFFLE W/A CPV3 485GD |
7 | 249890 | MANIFOLD PTD (5 @ 5-1/2) |
NI | 211342P | MS 10-32 X 1 HEXHD ZN (PKT 10) |
8 | 253746 | VALVE DUAL FLOW 60C #77 RANGE |
NI | 211323P | HB 1/4-20 X 1/2 X FULL SS 10PK |
9 | 210506 | CLAMP VALVE |
10 | 211804P | SWITCH IGNITOR (1 PK) |
11 | 210508 | C-CLIP VALVE STEM |
12 | 212164 | ELBOW 1/2 - 1/2 FEMALE |
13 | 241669P | REGULATOR NAT/LP (1 PK) |
14 | 212133 | 1/2 NPT X 21.25 NIPPLE BLK |
15 | 253844 | REIGNITION BOX RI 120FB |
NI | 211248P | SM 6-32X3/8 PH PAN TY F SS (10PK) |
16 | 212186 | BLACK NIPPLE 1/2 X 5 |
17 | 211132 | BUSHING STRAIN RELIEF 0.625" |
18 | 232225 | BRACKET PIPE HOLD |
NI | 211238P | SM 10 X 1/2 SL TD HWH SMS (PKT10) |
19 | 249162 | BRACKET GRIDDLE EVO2 RANGE |
NI | 211238P | SM 10 X 1/2 SL TD HWH SMS (PKT10) |
20 | 248069 | GRIDDLE THERMOSTAT 3/16" |
NI | 239472P | MS6-32 X1/4”SS,PH TR HD (10PK) |
21 | 545874 | WIRE STANDOFF COIL |
NI | 248882 | HARNESS MAINS GRIDDLE 17IN V2 |
NI | 245425 | IGNITER WIRES 5 |
NI | 252249 | HARNESS POWER CPV2 120V |
Valve Panel Components
This section details the components of the valve panel, including the main panel, burner dials, griddle dials, lightpipes, and associated electronic components like LEDs and harnesses. The diagram shows the arrangement of these parts with numerical references.
Reference | Part Number | Part Description |
---|---|---|
1 | 255507P | PANEL VALVE CPV3 485GD W GFX |
2 | 556037P | SCREW ST 8X5/8 TAB PN PH (PKT 10) |
3 | 255426P | BURNER DIAL S7 PRO OR SP |
4 | 255427P | GRIDDLE DIAL ASM S7 PRO OR SP |
NI | 530877P | SPRING KNOB BARBED (PKT 10) |
5 | 255221P | BEZEL S7 PRO RANGE SP |
6 | 255248P | LIGHTPIPE S7 REFRESH SP |
7 | 249804P | SCREW #6X1/2" PAN PZ T25 ZNPL |
8 | 255303P | SHIELD S7 OR PRO SP |
9 | 255397 | MOD LED DIAL S7 RED WHT 120V |
Includes | HOUSING AND PCB | |
10 | 255528 | MOD LED DIAL S7 RED 120V |
Includes | HOUSING AND PCB | |
NI | 255407 | HARNESS CTOP 2BNR SHT 120V S7 |
NI | 255408 | HARNESS CTOP 2BNR LNG 120V S7 |
NI | 255406 | HARNESS CTOP 1 BNR MED 120V S7 |
NI | 245999 | WIRE EARTH THERMOSTSAT |
NI | 248882 | HARNESS MAINS GRIDDLE 17IN V2 |
11 | 255568 | MOUNT SELECTOR CPV3 485 |
12 | 211238P | SM 10 X 1/2 SL TD HWH SMS (PKT10) |
Structure Components
This section covers the structural elements of the cooktop, including the hob assembly, landing ledge, cover, trim, and fasteners. The diagram shows how these main structural parts are assembled.
Reference | Part Number | Part Description |
---|---|---|
1 | 255239P | HOB ENAM ASSY 485 PRO RANGE S9 |
2 | 255387 | LANDING LEDGE WA CPV3 48 |
3 | 243539 | COVER REAR 48" (CP) |
NI | 211238P | MS 10X1/2 SL TD HWH SMS (PKT 10) |
4 | NS | BOX OUTER 48 (CP) |
5 | 245945 | TRIM 48 CP VALVE PANEL FLAT |
6 | 245914 | SPACER TRIM 6MM |
7 | 556037P | SCREW ST 8X5/8 TAB PN PH (PKT 10) |
Conversion & Hi Altitude Kits
This section lists kits for converting the gas cooktop between LP and NG fuel types, as well as kits for high altitude operation. Each kit includes specific jets, labels, and installation instructions.
Reference | Part Number | Part Description |
---|---|---|
NI | 255903 | KIT CONV LP TO NG RDV3/RGV3/CP |
Includes | JET MAIN DCS 2.20 MM | |
Includes | JET MAIN 2.10 MM | |
Includes | JET MAIN DCS 1.90 MM | |
Includes | JET SIMMER 0.57 MM (P) | |
Includes | JET SPUD 1.93 MM (48 DMS) | |
Includes | JET SPUD 1.85 MM (49 DMS) | |
Includes | JET SPUD 1.61 MM (52 DMS) | |
Includes | JET SPUD 2.49 MM (40 DMS) | |
Includes | JET SPUD 1.99 MM (47 DMS) | |
Includes | BYPASS JET VALVE 0.71 MM | |
Includes | JET SPUD 2.18MM (44DMS) | |
Includes | LABEL NATURAL GAS DCS | |
Includes | LBL CONV LP-NG RDV3/RGV3/CPV3 | |
Includes | INST CONVKIT PRO RGCK EVO3 USCA | |
NI | 516705 | KIT HI ALT LP 3-6K EVO3 |
Includes | JET MAIN 1.10MM (57DMS) X 2 | |
Includes | JET MAIN 1.00MM (61DMS) X 2 | |
Includes | JET MAIN 0.91MM (64DMS) X 4 | |
Includes | JET MAIN 0.84MM (66DMS) X 2 | |
Includes | JET SPUD 1.18MM (56DMS) X 1 | |
Includes | JET SPUD 1.07 (58DMS) X 2 | |
Includes | JET SPUD 0.97MM (62DMS) X 1 | |
Includes | JET SPUD 1.32MM (55DMS) X 2 | |
Includes | LBL ALT CONV RDV3/RGV3/CPV3 | |
Includes | INST CONVKIT PRO RGCK EVO3 USCA | |
NI | 516704 | KIT HI ALT LP 6-9K EVO3 |
Includes | JET MAIN 1.02MM (60DMS) X 2 | |
Includes | JET MAIN 0.95MM (63DMS) X 2 | |
Includes | JET MAIN 0.84MM (66DMS) X 4 | |
Includes | JET MAIN 0.75MM (69DMS) X 2 | |
Includes | JET MAIN 0.91MM (64DMS) X 1 | |
Includes | JET SPUD 0.97MM (62DMS) X 1 | |
Includes | JET SPUD 1.18MM (56DMS) X 2 | |
Includes | LBL ALT CONV RDV3/RGV3/CPV3 | |
Includes | INSTR ALT CONV-RGV2/RDV2/CPV2 X 1 |