AlgoLaser Delta 40W Laser Machine User Manual
Version 1.1
Air Assist Nozzle
This section discusses the Air Assist Nozzle component for the AlgoLaser Delta 40W laser machine.
References include:
- R (Air Assist Nozzle)
- R Air Assist Nozzle
Other labels potentially related to diagrams or specific parts: E B, E C, Block, B, H.
Software and Driver Installation
The manual references the use of Zadig-2.5.exe for driver installation or device management.
Typical steps may involve:
- Connecting the AlgoLaser Delta device.
- Launching the
Zadig-2.5.exeapplication. - Selecting the correct device from the list.
- Choosing and installing the appropriate driver.
The term "Phenomenon" might refer to troubleshooting or expected behaviors.
Document Information
The document contains various alphanumeric references such as 1, 2, 3, S, T, U, V, W, which likely point to specific sections or figures.
The document is available for download. The original source mentions purchasing the AlgoLaser Delta 40W (40 W) laser machine at a favorable price from Torden.
