User Guide for Revolo models including: WFV01, WFV01 Smart Locks with Camera, Smart Locks with Camera, Locks with Camera, Camera
WFV01 User Manual (PDF) Revolo Revolo Smart,Locks,with,Camera,,Keyless,Entry,Door,Lock,,WiFi,Smart,Door,Lock,with,Chime,,Supports,App,Control,,1080P,HD,Video,,Compatible,with,Alexa,,Auto-Locking,,Touchscreen,Keypad,,
File Info : application/pdf, 24 Pages, 757.98KB
DocumentDocumentWiFi Smart Video Lock Quick Start Guide DOWNLOAD REVOLO APP Download the Revolo APP from the APP store or Google Play. Scan the QR code to download the Revolo APP If you have any questions, please contact support@irevolo.com. CONTENT Process Guide ................................................................................................................................................01 What's Included .............................................................................................................................................02 Product Overview ..........................................................................................................................................03 Prepare Door For Installation ......................................................................................................................04 Installation Guide ..........................................................................................................................................05 STEP1-Installing the Latch and Strike ...................................................................................................05 STEP2-Installing Exterior Assembly ......................................................................................................07 STEP3-Installing the Mounting Plate .....................................................................................................08 STEP4-Installing Interior Assembly ........................................................................................................09 STEP5-Pair and Set up Smart Lock via App ........................................................................................13 STEP6-Installing Door Sensor (Optional) ..............................................................................................14 STEP7-Add Accessory (Optional) ..........................................................................................................15 FCC Statement ..............................................................................................................................................16 Canada Statement .........................................................................................................................................16 Warning ............................................................................................................................................................17 PROCESS GUIDE 1 2 Download the Revolo app to setup. 3 Follow the instructions and replace your existing lock. 4 Scan the QR code on you device. 5 Calibrate your lock and you are done. 6 Settings Accessory hold on the button of accessory for 5s to enter pairing mode (Optional). Go to the device to an add accessory, "Settings"->"Accessory"(Optional). 01 WHAT'S INCLUDED a b c d e f g h 2¾ 2 i j k l m n o 02 PRODUCT OVERVIEW Touchscreen Rubber Gasket Cylinder Cover Cylinder Type-C Port RES Battery Cover Battery Cover Button Reset Button Privacy Button Thumb Turn DEFINATION Lock-Out: If you fail to unlock the door for 5 consecutive times using the PIN Key, your Lock will be shut-down for 3 Mins. One Touch Locking: Press and hold Any key on keypad for 2 Seconds to lock the door. Privacy Button: Push and HOLD the Privacy button on inside panel for 3 Seconds to active Privacy Mode. This will disable all user PIN code access and APP control. Privacy Mode will be disable autometically after unlock the device with the Thumb Turn or Mechanical Key. Reset Button: Push and HOLD the Reset Button for 5 seconds to reset your device. After reset operation, the lock will be restored to factory default settings, all user credentials will be deleted. Battery Indicator: The Red LED will flash 3 times slowly if the battery level is lower than 20%. Please replace the batteries as soon an possible. Type-C Port: Insert a Type-C cable into the Type-C port and use a portable battery(5V 2A) to power the Smart Lock. If your device's batteries are completely ran out. Reset Button Click the Rest Button Loop to change the volume level. Duoble Click the Rest Button Loop to change the local melody. Hold the Rest Button Hold the rest button for 5 seconds to change to pairing mode. 03 PREPARE DOOR FOR INSTALLATION 1. Make sure that the following criteria are met so that the Smart Lock can be installed properly: Check the door status. Make sure the doorframe is aligned with the door. There are no obstructions stuck in the doorframe. Leave enough space for the deadbolt to extend into the doorframe when the door is locked. 2. Check your door / frame dimensions to make sure that they fit the following measurements: The cross bore diameter 2" (54 mm) or 1½" (38 mm) Backset 2" (60 mm) or 2¾" (70 mm) Diameter of the door hole 1" (25 mm) Door thickness 1" (35 mm) - 2" (50 mm) Cross bore 1 ½"(38mm) or 2"(54mm) Backset 2 "(60mm) or 2¾ "(70mm) Door hole 1"(25mm) Door thickness 1" (35mm)2" (50mm) 04 INSTALLATION GUIDE STEP 1 INSTALLING THE LATCH AND STRIKE To install the deadbolt: 1. Measure your door's backset dimension: whether it is 2¾"(70 mm) or 2" (60 mm) . 2. If your door's backset dimension is 2" (60 mm), use the provided deadbolt to install. If your door's backset is 2¾" (70 mm). Rotate and pull the latch as shown the extended latch. The bolt must be in retracted(Unlocked) position when you are changing backset. 90° 2¾ 2 2¾ 2 2" 60 mm 2¾" 70 mm 3. Insert the deadbolt into the doorframe and make sure the word "UP" faces up as indicated on the deadbolt. 4. Screw into the doorframe with a screwdriver (not provided). a. If chiseled chiseled actual size k >1mm IMPORTANT Ensure that there is a space between the faceplate and the side wall of the slot to avoid faceplate sticking deadbolt (recommend the size is more than 1mm), after installing the deadbolt. >1mm 05 b. If not chiseled not chiseled Install latch in door with wood block and hammer. Use a flathead screwdrive to remove rectangular face from latch and install driver-in collar. 5. Install strike on the door frame. IMPORTANT: Make sure hole in door frame is drilled a minimum of 1" (25mm) deep. l actual size 06 STEP 2 INSTALLING EXTERIOR ASSEMBLY IMPORTANT:Before installation, make sure the latch is fully retracted (in the unlocked position). To install the exterior assembly: 1. Measure your cross bore dimension and determine the installation steps accordingly. · If the diameter of your cross bore is 2"(54mm), install directly. · If you have a 1½"(38mm) crossbore, remove the spacer. Rubber Gasket IMPORTANT: Make sure the rubber gasket is on the exterior assembly before installation otherwise the exterior assembly will not be waterproof. 2. Route the cable connected on the exterior assembly under the deadbolt. Align the tailpiece with center hole of the deadbolt, and insert it into the center hole. Insert the tailpiece into the center hole 07 STEP 3 INSTALLING THE MOUNTING PLATE 1. Send the cable and the RF cable through the bottom slot in the mounting plate. RF cable Cable 2. Secure the mounting plate with the supplied screws. unlocked Keep parallel to door edge i actual size 08 STEP 4 INSTALLING INTERIOR ASSEMBLY 1. Press the battery cover button and remove from the slotted position. Keep the thumb turn installed in a vertical position. Slot Slot 2. Connect the cable and RF cable to the corresponding port. Note: Connect the cable first. 09 3. Rotate the thumb turn in vertical position, then push the cable and RF cable back to the hole of mounting plate and install the interior assembly. 4. To avoid stucking the cable and the RF cable, secure the interior assembly with supplied screws. actual m size 10 Make sure the thumb turn is vertical. 5. Test the thumb turn manually for smooth rotation. If thumb turn doesn't rotate, make sure the thumb turn in vertical position. 6. Insert the Li-battery into the battery case matching the battery connector. 11 7. Scan the QR code to pair your device with your phone. Close battery cover. 12 STEP 5 PAIR AND SET UP YOUR SMART LOCK VIA APP Note: The lock will not lock automatically before the setting is completed. To avoid being locked outside, pair your phone with the Smart Lock and set an access code unlocking the door. To pair your phone with Smart Lock. 1. Scan the QR code on the back of the Smart Lock to get the information of the Smart Lock. Follow the on-screen instructions to complete the setup. Note: The first user that is paired is the only administrator, and can authorize other users to use the lock. Reset the device locally by press and HOLD the reset button for 5 seconds will not unpair the device from the administrator's APP. The administrator will not be able to setup and operate the device with Revolo App anymore after reset locally. Moreover the administrator has to unbind the Lock via Revolo App, so that the Lock can be paired or binded by other users. 13 STEP 6 INSTALLING DOOR SENSOR For optimal performance, Door Sensor should be mounted within 1" from the edge of your door, and within 1" from the top of the interior assembly. Surface Mount <1" (25mm) n 1. Determine mounting location. 2. Stick the mounting tape to the door sensor. 3. Stick it on door frame. 4. Calibrate your Lock. 14 STEP 7 ADD ACCESSORYOptional 1. Go to the device to an add accessory, "Settings"->"Accessory"->"Add Accessories" or "+". Settings Accessory 2. Hold the button of the accessory for 5s to enter pairing mode. 3. Follow instructions from App and accessory prompts, then complete the process. Tip: If you encounter any problems during the use of the product, please contact support@irevolo.com. 15 FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CANADA STATEMENT This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1) L'appareil ne doit pas produire de brouillage; 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps. 16 WARNINGS Failure to follow the below instructions could result in damage to the product and void the factory warranty. The accuracy of the door preparation is critical to allow proper functioning and security of this Revolo Product. Misalignment of the door prep and lock can cause performance degradation and hinder the security functions of the lock. Finish Care: This lockset is designed to provide the highest standard of product quality and performance. Care should be taken to ensure a long-lasting finish. When cleaning is required use a soft, damp cloth. Using lacquer thinner, caustic soaps, abrasive cleaners or polishes could damage the coating and result in tarnishing. 17福昕阅读器PDF打印机 版本 11.1.126.4594