Honeywell TR100 Wall Module Pocket Guide

About

The Honeywell TR100 Wall Module is an advanced, highly configurable device providing building automation connectivity, well-suited for Commercial building applications. The TR100 can replace existing Honeywell wall modules using the existing tools familiar to installers. The wall modules utilize Sylk communication, which is polarity insensitive and uses two wires. This device supports BACnet MS/TP and Modbus communications via Rs-485 bus, which is necessary for typical HVAC building control systems.

Package Includes

TR100 Wall Module X1
Anchor for Dry Wall X2
Screw for Dry Wall X2
UUID QR Code Label X2
Screw for Junction Box X2

Wire Installation

Solid wire is strongly recommended. Stranded wire is an alternative. If replacing a Wall Module and wire replacement is unavailable, please re-strip the wire following the strip length shown above (1/2 inch or 12.7 mm).

Diagram Description: The diagram shows wire stripping. A wire is shown with a strip length of 1/2 inch (12.7 mm) and a remaining insulated length of 5.5 mm.

QR Code For Digital Guide

Scan the QR code for the digital guide.

Technical Resource

TR100 Wall Module Datasheet - 31-00671
TR100 Wall Module Installation Instructions - 31-00673
TR100 Wall Module User Guide - 31-00674
TR100 BACnet Integration guide - 31-00676
TR100 Safety Sheet - 31-00672
TRTC Decoplate Pocket Guide - 31-00657
TR100 Modbus Integration guide - 31-00748

Detaching the Wall plate

Loosen the screw.
Insert screwdriver to separate the display.
Separate the display.

Diagram Description: Step-by-step illustration showing how to detach the wall plate from the module. It involves loosening a screw, then using a screwdriver to pry the display unit away from the base.

Wall Module Mounting

Mount the wall plate to the wall using screws.
Connect the wires to the module.
Attach the module to the wall plate and tighten the screw.

Diagram Description: Three steps illustrating the mounting process. Step 1 shows the wall plate being screwed to the wall with wires connected. Step 2 shows the module being aligned with the plate. Step 3 shows the module attached and the screw being tightened.

	Honeywell TR100 Wall Module Modbus Integration Guide This guide provides detailed information on integrating and configuring the Honeywell TR100 Wall Module using the Modbus protocol. It covers setup procedures, Modbus object points, and various operational parameters for building automation systems.
	Honeywell Optimizer Unitary Controller Datasheet Datasheet for Honeywell 230 VAC Optimizer Unitary Controllers, detailing features, specifications, part numbers, dimensions, and communication protocols for advanced building automation systems.
	TC500A Commercial Thermostat Quick Start Guide This guide provides instructions for the initial setup and configuration of the TC500A Commercial Touchscreen Thermostat, covering both mobile app and on-device setup methods. Learn how to connect your thermostat, set preferences, and understand its features.
	Honeywell TC300B/TC320B Connected Thermostats for Commercial Buildings Advanced, highly configurable TC300B and TC320B thermostats from Honeywell provide building automation connectivity for commercial indoor applications. Features include a color touchscreen, flexible I/O, embedded humidity sensor, and Wi-Fi connectivity for the TC320B.
	Honeywell TC300 Thermostats BACnet Integration Guide This guide provides comprehensive information for integrating Honeywell TC300 Thermostats into BACnet networks. It covers BACnet Objects, device properties, configuration settings, and essential safety precautions for installation and operation. Learn how to set up BACnet MS/TP and BACnet IP, manage I/O configurations, alerts, schedules, and network inputs for optimal building automation.
	Honeywell C7355A Room IAQ Monitor \| Commercial Grade Air Quality Sensor Honeywell C7355A Room IAQ Monitor: A commercial-grade indoor air quality monitor providing real-time detection of PM2.5, PM10, CO2, TVOC, temperature, and humidity. Features RESET certification and RS-485 Modbus communication for intelligent building systems.
	TC500A Commercial Thermostat Configuration and User Guide Comprehensive guide for the Honeywell TC500A Commercial Thermostat, covering configuration, features, installation, and operation for building automation systems.
	Honeywell Optimizer Advanced Plant Controller Datasheet Detailed technical datasheet for the Honeywell Optimizer Advanced Controllers (N-ADV-133-H, N-ADV-134-H, N-ADV-112-H). These next-generation plant and integration controllers feature the Niagara framework, a quad-core IMX8 processor, flexible I/O, native BACnet, and robust Ethernet/serial integration for complex building automation systems.