Edifier Comfo Run
Open Ear Wireless Sports Headphones
User Manual
1. Power ON/OFF
To power the headphones on or off, press and hold the Multi-Function Button (MFB) for approximately 3 seconds.
2. First Pairing
After powering on the headphones, select "EDIFIER Comfo Run" from your device's Bluetooth settings to establish a connection.
3. Pairing For New Device
1. Ensure the headphones are powered off.
2. Press and hold the MFB for approximately 5 seconds.
3. Select "EDIFIER Comfo Run" from your device's Bluetooth settings to connect.
Note: The headphones will automatically connect to the last paired device on future use.
4. Reset
To reset the headphones to factory settings, power them on and then press the MFB 5 times.
5. Charging
Input: 5V ⎓ 1A
Note: Avoid charging if the charging port contains sweat or other liquids, as this could cause damage.
6. Controls
The following are the control functions via the Multi-Function Button (MFB):
- Play/Pause Music: Press MFB once (x1).
- Answer/End Call: Press MFB once (x1).
- Next Track: Press and hold MFB for 2 seconds (2s x1).
- Previous Track: Press and hold MFB for 2 seconds (2s x1).
- Volume Up: Press MFB three times (x3).
- Volume Down: Press MFB twice (x2).
- Activate Voice Assistant: Press and hold MFB for 3 seconds (3s x1).
- Reject Call: Press and hold MFB for 2 seconds (2s x1).
Note: Images are for illustrative purposes only and may differ from the actual product.
Contact & Information
For more information, please visit our website: www.edifier.com
Follow us on social media: [Facebook] [Instagram] [X]
Model: EDF200121
Manufacturer: Edifier International Limited
Address: P.O. Box 6264, General Post Office, Hong Kong
© 2024 Edifier International Limited. All rights reserved.
Printed in China
NOTICE: For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. If any difference is found, the actual product prevails.