Installation Guide for HOOKE ROAD models including: BXG.6483 Front Bumper, BXG.6483, Front Bumper, Bumper
Hooke Road Bumper Installation Instructions | Installation Manual – Hooke Road 4x4
MAKE A DIFFERENCE Front Bumper BXG.6483 (INSTALLATION INSTRUCTION) Please verify all parts are present and read instructions carefully before starting installation. Please feel free to contact your distributor if you have any kind of question about your purchase. 1 CONTENTS B1 A B2 C1 C2 A: Main Body D: Skid plate Qty Part Name Size(mm) 8 Hex Bolt M12*35 6 Hex Bolt M12*30 9 Hex Bolt Button Bolt 14 Split Lock Washer 9 Split Lock Washer M8*20 M6*16 D12 D8 22 Flat Washer M12*30*1.5 D E1 E2 B1&B2: Wings C1&C2: License Plate Bracket E1&E2: Skid Plate Mounting Brackets Picture Qty Part Name Size(mm) Picture 9 Flat Washer M8 4 Flat Washer M6*12*1 Nylon Round Spacer M6*12*1.3 4 Nylon Lock Nut M6 14 Hex Nut M12 4 Flange Hex Lock Nut M8 2 EVA 2 TOOLS REQUIRED To view online instruction, please scan the QR code. Drive Ratchet Handle 10mm, 13mm, 19mm Wrench 4mm Hex Bit Socket 3 INSTALLATION INSTRUCTION Place the vehicle in park, remove the factory bumper from the frame. Step 1 Step 2 First, stick the EVA to the main body. Assemble your Hooke Road bumper. Align the outer profile with the inner profile and tighten all hardware. Repeat this step on the other side of the bumper. (6) M12×30 Hex Bolts (6) M12×30×1.5 Flat Washers (2) EVA (6) D12 Split Lock Washers (6) M12 Hex Nuts EVA Assemble the license plate bracket, then secure it onto the bumper and tighten all hardware. (4) M6×16 Buttom Bolts (2) M6×12×1.3 Nylon Round Spacers (4) M6×12×1 Flat Washers (4) M6 Nylon Lock Nuts Step 3 Step 4 Place the bumper onto the frame rails, then secure it to the vehicle frame. Adjust it to the desired position, then tighten all bolts. (8) M12×35 Hex Bolts (16) M12×30×1.5 Flat Washers (8) D12 Split Lock Washers (8) M12 Hex Nuts Step 5 Secure the mounting brackets to the vehicle and the skid plate to the bumper. Connect the skid plate to the brackets, then tighten all hardware. (9) M8×20 Hex Bolts (9) M8 Flat Washers (9) D8 Split Lock Washers (4) M8 Flange Hex Lock Nuts Left Right E1 E2 Step 6 The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product! to find your parts. Feel Free To Share Your Vehicle @HookeRoad4x4 With The Hashtag #hookeroad If You'd LikeAdobe PDF library 17.00 Adobe Illustrator 27.6 (Windows)