Parkside Multifunction Table Set
This quick reference guide is an integral part of the operating instructions. Keep it safe with the operating instructions. When passing the product on to third parties, include all documentation. Read the operating instructions before use and pay particular attention to the safety instructions.
Scan the QR code or download the complete operating instructions at www.lidl-service.com.
Intended Use
The multifunction table set consists of three table elements that can be used individually or combined. You can also choose from four different table heights. The multifunction tables are versatile and can be used for various purposes, such as a wallpapering table or for parties. They are easy to transport and fold for space-saving storage. This product is intended for private household use only and not for commercial purposes.
Parts Description
Immediately after unpacking, verify that all parts are present and that the product is in perfect condition.
- 1. Spring bolt
- 2. Strut
- 3. Table top
- 4. Carrying handle
- 5. Table leg
- 6. Metal plate
- 7. Plastic end caps
- 8. Connection bracket
- 9. Nut
- 10. Locking clip
- 11. Locking plug
Technical Data
- Set-up dimensions per section: approx. 100 x 60 cm
- Table heights: 73 cm; 80 cm; 87 cm; 94 cm adjustment
- Load capacity per table: max. 35 kg
Safety Notices
- WARNING! RISK OF FATAL INJURY AND ACCIDENT HAZARD FOR TODDLERS AND SMALL CHILDREN! Never leave children unsupervised with the packaging material. Suffocation hazard.
- WARNING! DANGER TO LIFE! During installation, keep children away from the work area. Ensure that the product is assembled only by competent persons. Place the product on a solid, level surface.
- CAUTION! Do not leave children unattended! The product is not a climbing frame or toy! Do not allow persons, particularly children, to climb onto or lean against the product. The product may become unbalanced and tip over, potentially causing injury and/or damage.
- Store the product in a dry place, out of reach of children.
- CAUTION! Do not lift or move the product when it is loaded.
- The load on the product must not exceed 35 kg. Failure to observe this advice may result in injury and/or product damage.
- Only use the product in areas protected from rain.
- Do not use the product as a work platform.
- Only fold the tables at the lowest height setting.
- Before each use, verify that the spring bolts for height adjustment are firmly in place.
- Dispose of defective tables that can no longer be used safely according to local regulations.
Assembly (Fig. A–F)
- First, unfold the table legs 5 in pairs (see Fig. A).
- Select the desired table height and lock it in place with the spring bolts 1 (see Fig. B).
- Pull the hinges upwards until they form a straight line (see Fig. C). Slide the locking clips 10 over the hinges to ensure they are stable.
Connecting the Tables
You can connect multiple tables as follows (see Fig. D):
- Remove the plastic end caps 7 on the connection side for the first table.
- On the second table, remove the plastic end caps 7, insert the metal plate 6 into the slot, and tighten the nut 9. Then, insert the other side of the metal plate 6 into the first table.
- Secure the connection by pressing the plastic locking plug 11 into the hole.
- Repeat the process if you want to connect more tables.
Note: Tables can also be connected in various angle combinations. Use the connection brackets 8 for this by attaching them under two tables (see Fig. E).
Note: There are many possibilities for combining the tables (see Fig. F). Please note that in some cases, the connection brackets 8 may not be usable.
Cleaning and Care
For stubborn dirt, use a damp cloth and, if necessary, a mild cleaning agent.
de/
