Zigbee Series Video - MiBoxer
Instruction Manual for MiBOXER models including: E3-ZR 3 in 1 LED Light Strip Controller, E3-ZR, 3 in 1 LED Light Strip Controller, Light Strip Controller, Strip Controller, Controller
Miboxer Zigbee 3.0 E3-ZR 3 in 1 LED Light Strip Controller 12V-24V – UK LED Lights User Manual:
Miboxer E2-RF 2 in 1 LED RF Controller 12V-24V
File Info : application/pdf, 13 Pages, 2.17MB
DocumentDocumentSubordinate New Brand 3 in 1 LED Controller (Zigbee 3.0 + 2.4G) Instrucon Manual Contents Product features ....................................................................................... 2 Set up output mode ................................................................................ 3 Compable with remote ........................................................................ 3 2.4G RF remote control instrucon .................................................... 4-7 Link / Unlink Instrucons ..................................................................... 4 Auto transming & Synchronizaon ................................................... 5 Dynamic mode table selecon ........................................................... 5 PWM frequency switching .................................................................. 6 "Do Not Disturb" mode is acvated and shut down .......................... 7 Smartphone app control instrucon ...................................................... 8 Philips Hue control instrucon ................................................................ 9 Alexa voice control instrucon .............................................................. 10 Google home voice control instrucon ................................................ 11 DMX512 LED transmier control instrucon ...................................... 12 Aenon ................................................................................................ 13 Product features Made by new Zigbee 3.0 wireless transming technology with low power consumpon, strong ability to build network automacally and an-interference. with MiBoxer Zigbee gateway to get wireless dimming color, remote control, ming control, group control, music rhythm funcon. Support 2.4G RF remote control. 16 Millions of colors to choose Color temperature adjustable Dim brightness / Saturaon Follow Zigbee 3.0 standard protocol Zigbee 3.0 Support Zigbee 3.0 remote control (Zigbee 3.0 gateway is needed) Support 2.4G Remote control Auto-transming & Synchronizaon Support Smartphone app control (Zigbee 3.0 gateway is needed) Support third party voice control (Zigbee 3.0 gateway is needed) DMX512 controllable (Only for RGB+CCT output mode DMX512 LED transmier is needed) Various control soluon: Powered b Philips MiBoxer IKEA Hue Zigbee Gateway TRÅDFRI 2.4GHz Amazon Remote Echo Plus 2 Set up output mode Set up correct output mode based on the feature of lights Seng method: Press "SET" buon connuously to switch output mode (aenon: it will log out without operaon within 3 seconds) Output mode sheet ( confirm output mode based on color of indicator) Indicator color Red Light Green Light Blue Light Output RGB RGBW RGB+CCT Compable with these 2.4G RF remote controls (Purchased separately) FUT100 FUT089S FUT089 FUT088 FUT092 FUT096 B8 FUT089-B FUT092-B FUT096-B B0 / B0-B B4 / B4-B / T4 B3 / B3-B / T3 S2-B / S2-W S2-G SET 8.8.8.8 + FUTD01 3 2.4G RF Remote control instrucon 1). Linking Code Instrucons Power Light or SET 1 Power off 10 seconds and power on again or short press " SET " one me Link / Unlink buon 2 Short press " I " buon 3 mes within 3 seconds. Power Light 3 Lights blink 3 mes slowly means linking is done successfully. Linking failed if light is not blinking slowly, Please follow above steps again. (Note: Light that have linked can't link again) 2). Unlinking Code Instrucons Power Light or SET 1 Power off 10 seconds and power on again or short press " SET " one me Link / Unlink buon 2 Short press " I " buon 5 mes within 3 seconds Power Light 3 Lights blink 10 mes quickly means unlinking is done successfully. Unlinking failed if light is not blinking quickly, Please follow above steps again. (Note: Light haven't linked that don't need to unlink) 4 3). Auto transming & Synchronizaon (only for remote control) Remote signal auto transming One light can transmit the signals from the remote control to another light within 30m, as long as there is a light within 30m, the remote control distance can be limitless. Dynamic modes auto synchronizaon Mul lights can synchronize if they are in same dynamic mode and linked with same remote (distance between each light is within 30m) Auto transming / Modes auto synchronizaon Controller Distance 30m Controller 4). Dynamic mode table selecon (only for remote control) Select dynamic mode table 1: While the light is in stac mode, short press " S+ " buon 5 mes quickly unl blue light flashes 3 mes slowly, stac mode is acvated successfully. Select dynamic mode table 2: While the light is in stac mode, short press " S- " buon 5 mes quickly unl yellow light flashes 3 mes slowly, stac mode is acvated successfully. Dynamic mode table 1 (default) Number 1 2 3 4 5 6 7 8 9 Dynamic Mode Mardi Gras Automac color change Sam Gemstone Twilight American Fat Tuesday Party Slow Color Splash Brightness / Saturaon / Speed Adjustable 5 Dynamic mode table 2 (need to switch manually) Number 1 Dynamic Mode Seven colors gradual change Brightness / Saturaon / Speed 2 White light Gradual change 3 RGB gradual change 4 Seven colors jump to change 5 Jump to change randomly 6 Red light gradual change +Flash 3 mes 7 Green light gradual change +Flash 3 mes Blue light gradual change 8 +Flash 3 mes 9 White light gradual change +Flash 3 mes Adjustable 5). PWM high frequency / low frequency switching (only for remote control) Switch to high frequency: Press "OFF" buon 1 me within three seconds and press "ON" buon 5 mes, Acvated successfully once led light flashes 2 mes quickly. Switch to low frequency: Press "ON" buon 1 me within three seconds and press "OFF" buon 5 mes, Acvated successfully once led light flashes 2 mes slowly. 6 6). "Do Not Disturb" mode is acvated and shut down (default acvated) Turn on "Do Not Disturb" mode (wide using in the area which have power failure frequently to save energy) 2.4G RF Remote turn on and turn off instrucon Turn on "Do Not Disturb" mode: Press "OFF" buon three mes within three seconds and press "ON" buon three mes, Acvated successfully once led light flashes four mes quickly. Aenon: Do not disturb mode is acvated 1. When the light is OFF status (For example: Use app or remote to turn off light) The light is OFF status once you turn off power and turn on again. (User must turn off and turn on power twice mes to acvate light or use APP / remote to acvate light) 2. When the light is ON status The light is ON status once you turn off and turn on power one me. Turn off "Do Not Disturb" mode: Press "ON" buon three mes within three seconds and press "OFF" buon three mes, closed successfully once led light flashes four mes slowly. Aenon: The light will be always "ON" status if you turn on and turn off power once user closed "Do Not Disturb" mode. App turn on and off "Do Not Disturb" mode instrucon (check details in page 8) 7 Smartphone APP control instrucon Added Zigbee 3.0 gateway into "Tuya Smart" App (please review instrucon of Zigbee 3.0 gateway) 1). Connect with power supply. 2). Pairing network (aenon: factory default is pairing network). Way one: Turn off and turn on light 3 mes or over 3 mes connuously, the light is in breathing status. Way two: Long press " SET " key unl indicator light flashing. 3). Open "Tuya Smart" APP to click Zigbee gateway, then click "Add sub device". 4). Click "Indicator is flashing quickly". 5). Support APP dimming or group control and etc once added successfully. 5 in 1 Controller App turn on and off "Do Not Disturb" mode (default acvated) Click the light which need to be set up or group control --- click "More"--- click "Power-on behavior"--turn on or off 5 in 1 Controller 8 Philips Hue control instrucon Added "Philips Hue" into APP 1). Connect with power supply 2). Pairing network (aenon: factory default is pairing network) Way one: Turn off and turn on light 3 mes or over 3 mes connuously, the light is in breathing status. Way two: Long press " SET " key unl indicator light flashing. 3). Open "Philips Hue" App to click "SETTINGS" and click "Lights" 4). Click "+" on the top of right corner 5). Click "Search" 6). Click "Start configuraon", Follow the app instrucon to complete configuraon 9 Alexa voice control instrucon 1). Alexa control (Audio support Zigbee 3.0 protocol) You can connect directly if your Amazon ECHO already is built-in zigbee 3.0 protocol, following model with zigbee 3.0 protocol: Amazon ECHO Plus ( 2nd Gen), ECHO (4th Gen), ECHO Studio, ECHO Show (2. Gen) 1). Connect with power supply 2). Pairing network (aenon: factory default is pairing network) Way one: Turn off and turn on light 3 mes or over 3 mes connuously, the light is in breathing status. Way two: Long press " SET " key unl indicator light flashing. "Alexa, Discover devices" 3). Say to Amazon ECHO "Alexa, Discover devices" Wait for a while to discover device, Voice control is acvated 2). Alexa control (Audio don't support Zigbee 3.0 protocol) Please add device into Miboxer Zigbee 3.0 gateway if your Alexa don't support zigbee 3.0 protocol (check details in page 8), then start following steps 1). Open Alexa App 2). Click "More" on the boom of right corner 3). Click "Skills & Games" 4). Click " " on the top of right corner 5). Type into "Smart life" and search 6). Click "Smart Life" skill, follow instrucon to finish configuraon and start voice control 10 Google Home voice control instrucon Please add device into MiBoxer Zigbee 3.0 gateway (check details in page 8) and start following steps 1). Open Google Home App 2). Click "+" on the top of le corner 3). Click "Set up device" 4). Click "Works with Google" 5). Click " " on the top of right corner 6). Type into "Smart life" and search 7). Click "Smart Life" skill, follow instrucon to finish configuraon and start voice control 11 DMX512 LED Transmier Control (Purchased separately) Only for RGB+CCT output mode 2.4GHz Wireless Signal 1 Zone Limitless + SET 8.8.8.8 DMX512 Transmier + Connect DMX512 Control Panel 16 Zone Limitless DMX512 LED Transmier Link/Unlink 1 Follow instrucon of DMX512 transmier (FUTD01), Choose the zone for the light by pressing " + " or " - " (e.g. "CH12" means zone 12) Power SET Link/Unlink buon SET Power 2 3 4 Link The controller is powered off for 10 seconds and then powered on, or press " SET " buon 1 me. Short press " SET " 3 mes within 3 seconds while the indicator of controller is ON Link is done once indicator of controller flashes 3 mes slowly Unlink The controller is powered off for 10 seconds and then powered on, or press " SET " buon 1 me. Short press " SET " 5 mes within 3 seconds while the indicator of controller is ON Unlink is done once indicator of controller flashes 10 mes quickly If the link or unlink failed, please follow the above steps again. 12 Aenon 1. Please turn off power supply before installaon. 2. Please ensure input voltage to be same as requirements from device. 3. Don't disassemble device if you are not expert, otherwise it will damage it. 4. Please do not use the light in the place with widely range metal area or strong electromagnec wave nearby, otherwise, the remote distance will be seriously affected. Scan QR code to watch Zigbee series video instrucon Or enter into following link directly hps://miboxer.com/light/video/zigbee.html Made in China