Anko True Wireless Buds with ENC

Product Overview

The product includes a charging case and earbuds. It also comes with a USB-C charging cable and small, medium, and large replacement eartips.

Model: 43398409

Bluetooth Name: anko43398409

The charging case has an LED indicator. The earbuds also have LED indicators and a button (labeled 'O').

Earphone Function Operation

• Pause/Play: Press either 'O' button.
• Next Track: Press and hold the right 'O' button.
• Previous Track: Press and hold the left 'O' button.
• Volume Up: Press the right 'O' button twice in quick succession.
• Volume Down: Press the left 'O' button twice in quick succession.
• Answer Call: Press either 'O' button.
• Reject Call: Press and hold either 'O' button for 2 seconds.
• End Call: Press either 'O' button twice in quick succession.
• Activating Phone Assistant: Press either 'O' button three times in quick succession.

Power ON/OFF and Pairing

• To turn the earbuds ON, take them out of the charging case.
• Once powered on, the earbuds will sync and enter pairing mode, indicated by flashing blue and red LED lights.
• Search for the Bluetooth pairing name 'anko43398409' on your device.
• Select to pair. The LED indicators will turn off once successfully connected.
• To turn the earbuds OFF, place them back into the charging case.
• To manually power the earbuds ON/OFF without the charging case, press the earbud button for 5 seconds.

Charging the Case

• Connect the USB-C charging cable to the charging case. Use a standard USB-A port with a 5V Max. 3A output.
• The LED indicator on the case will flash white while charging. All four lights will remain on when the case is fully charged.
• Battery Level Indicators:
  • 1 LED light = 25% battery level
  • 2 LED lights = 50% battery level
  • 3 LED lights = 75% battery level
  • 4 LED lights = 100% battery level

Charging the Earbuds

• Place both earbuds into the charging case, ensuring the charging pins are fully connected.
• The LED indicator on the earbuds will stay red while charging and turn off when fully charged.

Safety Instructions

• It is recommended to fully charge the earbuds before first use.
• To maintain battery life, charge the earbuds and charging case fully once a month.
• If earbuds fail to connect to a Bluetooth device: place them in the charging case to turn them off, ensure both earbuds are connected to the charging pins, turn off Bluetooth on your device, then try turning the earbuds on again and repeat the pairing process.
• The earbuds can only be used with the provided charging case.

Caution

• The batteries in this product are not replaceable.
• Avoid exposing the battery to extremely low temperatures, low air pressure at high altitudes, or extremely high temperatures during use, storage, or transportation, as this could result in an explosion or leakage of flammable liquid or gas.
• Dispose of the unit with care. Disposal in fire, oven, or through mechanical crushing or cutting may cause an explosion.

Specification

• Bluetooth Version: 5.4
• Driver Size: 6mm
• Impedance: 16Ω±15%
• Sensitivity: 102dB ± 3dB at 1 kHz
• Transmission Distance: 10m
• Charging Voltage: DC 5.0V/1A
• Charging Port: USB-C
• Earphones Battery Capacity: 40mAh
• Charging Case Battery Capacity: 400mAh
• Charge Time (Earbuds): 1.5 hours
• Charge Time (Charging Case): 2.5 hours

12 Month Warranty

Thank you for your purchase. This product is warranted against defects in materials and workmanship for 12 months from the date of purchase, provided it is used according to the accompanying instructions. This warranty is in addition to your rights under the Australian Consumer Law. For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.

Kmart will provide a refund, repair (where possible), or exchange (subject to availability) for a defective product within the warranty period. Kmart will bear reasonable expenses related to warranty claims. This warranty does not apply if the defect results from alteration, accident, misuse, abuse, or neglect.

Please retain your receipt as proof of purchase. For any product issues, contact the Customer Service Centre. Warranty claims and claims for expenses incurred in returning the product should be addressed to the respective Customer Services Centre.

Goods come with guarantees that cannot be excluded under the Australian Consumer Law. Consumers are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. Consumers are entitled to have goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Customer Service

MADE IN CHINA

CUSTOMER SERVICE:

• KMART AU: 1800 124 125
• KMART NZ: 0800 945 995
• TARGET AU: 1300 753 567

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. Any use of these marks by KMART AUSTRALIA is under license. iPhone, iPad and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.

v3