2.4G Air Mouse & Fidelity Voice Input
Product Icon
The product features several key buttons and indicators:
- Power
- IR Learning Key
- Play Pause
- OK/Enter
- Mouse Left
- Left
- Indicator
- Up
- Menu
- Down
- Home Return
- Mouse Right
- Page Up
- MIC
- Mouse on/off
- Right
- Volume +
- Page Down
- -Volume
- Voice on/off
- Backspace
- Mute
- Battery compartment cover
IR Learning
To learn an IR signal (e.g., for a power button):
- Press and hold the "Power" button on the air mouse. The LED will flash slowly, indicating IR learning mode.
- Aim the air mouse's IR transmitter at the original remote's IR transmitter and press the "Power" button on the original remote. The air mouse's LED will light up if the code is received successfully.
- The LED will flash slowly again, signifying that the learning process is complete.
- The data is saved automatically, and the product exits learning mode.
- To clear the learned code, press and hold both the "OK" and "DEL" buttons.
Air Mouse Cursor Speed Adjustment
The air mouse has 3 levels of cursor speed. Adjust from slow to fast by pressing and holding "OK" and "Volume +" buttons. The speed adjusts one level when the LED lights up. Adjust from fast to slow by pressing and holding "OK" and "Volume -" buttons. The speed adjusts one level when the LED lights up.
Function Keys
- Home: Returns to the home screen.
- Return: Goes back to the previous screen.
- OK: Confirms an action or inserts a cursor.
- Cursor Locking: Press to lock the air mouse cursor; press again to unlock.
- Play/Pause: Controls multimedia playback.
How to Use
For initial use, plug the USB receiver into a USB port on your device. Wait 20-60 seconds for the driver to install. Move the mouse; if the cursor moves on the screen, pairing is successful. If not, press and hold "OK" and "Home" buttons. The LED will flash. Pairing is successful when the LED stops flashing.
Product Specifications
- Transmission method: 2.4G RF wireless
- Sensors: 6-axis Gyroscope
- Number of keys: 17
- Range: >10m
- Battery Type: AAA*2
- Material: ABS Plastic and silicone
- Size: 143*45*29MM
- Weight: 50g
Notes
- Non-professionals are prohibited from using the test mode. Under normal use, re-install the battery to restore functionality if the red light is always on.
- IR Learning is only for the "power" key.
- This product is available in a gyroscope version and a non-gyroscope version. The gyroscope version allows cursor control by wrist movement. The non-gyroscope version uses the up, down, left, and right buttons to move the cursor on a virtual mouse.
Voice Switch
Press and hold the "Voice Switch" button to turn on the voice channel. Release the button to turn off the voice channel.
Low Battery Reminder
The red light flashes slowly when the AAA battery power is below 2V, indicating that the batteries need replacement.
Sensor Calibration
Automatic Calibration: Changes in voltage and temperature can cause cursor drift. To calibrate, place the mouse flat on a desk and keep it still. Pressing any key to wake it from hibernation mode can also complete calibration.
General Information
This is a wireless air mouse with built-in axis gyroscope and gravity acceleration sensor, featuring fidelity voice input. It functions as a traditional remote control, computer mouse, and gaming motion controller for Android platforms. The plug-and-play micro receiver is compatible with personal computers, projectors, TV boxes, and Home Theater Personal Computers. By holding the air mouse and rotating your wrist, you can control the cursor on the screen, managing your computer and entertainment equipment from a distance. The ergonomic design replaces traditional computer mice and infrared remotes, offering convenience for managing your computer and television.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.