Kinderkraft JOY Travel Cot

Model: JOYEN 12221:2008+A1:2013Rev 1.6

Thank you for choosing a Kinderkraft product. Our designs are for children, with safety and quality as our top priorities. Enjoy your product and know you've made the right choice.

Important Safety Information

Keep away from open flames and heat sources like radiators, electric or gas stoves.
Do not use if any part is damaged, torn, or missing. Use only manufacturer-approved parts.
Do not leave anything in the playpen or near it that could pose a tripping or strangulation hazard, such as cords from curtains or cables.
Do not use more than one mattress in the playpen.
Ensure all locking mechanisms are fully engaged before use.
The lowest position of the base is the safest. When the child begins to sit independently, use the cot only at this lowest level.
Never leave a child unattended.
Ensure wheels are locked before use.
Mattress thickness: maximum 8 cm. Mattress dimensions: 120 x 60 cm. Ensure no gap larger than 30 mm between the mattress and the cot sides.
Do not use the playpen if the child can climb out.
The changing table is designed for children up to 12 months old and a maximum weight of 11 kg.
Ensure all four central locking mechanisms on the sides are engaged. The side locking mechanism will not function if the cot base is not properly positioned.

Parts Included

1. Cot frame
2. Folding base
3. Suspended floor
4. Suspended floor supports (x4)
5. Bag
6. Changing table
7. Changing table rails (x2)
8. Panel with baskets and hooks (x2)
9. Toy arm with 3 plush toys
*These parts are only available with the accessory model.

Assembly Instructions

Step 1: Assembling the Cot Frame

Open the bag zipper and pull the cot out. Unfasten the Velcro straps of the folding base. Pull out the cot and other items. To unfold the frame (1), place it with wheels down (Diagram A). Spread the corners to grip the central parts of the sides. Pull the shorter sides upwards until they lock (Diagram B). Grip the central parts of the longer sides and pull upwards until they lock (Diagram C). Push down the central part of the base (Diagram D). The frame will open completely and the cot will lock into place (Diagram E).

Important: Ensure all four central locking mechanisms on the sides are engaged. The side locking mechanism will not function if the cot base is not properly positioned. If the hinged floor (3) is not installed, install it using the zipper (Diagram F) and secure it with the buckle (Diagram G). Insert the support tubes (4) into the holes of the suspended floor (Diagrams H and I). Place the base (2) inside the cot (Diagram J).

Securing the Base: Attach the straps under the base. Start by opening the entrance zipper. Attach the straps to the designated points under the floor and then to the opposite side. To facilitate attaching the other side, it is recommended to partially open the zipper around the floor. Insert the straps into the holes and secure them with the Velcro fasteners under the floor (Diagrams K, L, M, N, O). Close the zipper around the floor and secure it with the buckle (Diagram P).

Step 2: Installing the Changing Table

Insert the mounting rails (7) into the changing table frame (6) until the locking button clicks into the frame (Diagrams R and S). To ease rail installation, loosen the changing table's Velcro straps and close all latches after securing the frame. Place the changing table by pressing it firmly against the cot frame until it is fully secured on the sides (Diagram T). The plastic clip of the pocket should be attached to the cot frame (Diagram U).

Step 3: Attaching the Panel with Baskets and Hooks

Insert the hooks into the holes on the panel (8) and then attach them to the cot frame (Diagrams W and X).

Step 4: Assembling the Toy Arm

Place the arm (9) onto the rotating mechanism head in the direction of the arrow and rotate it 180° counter-clockwise (Diagrams Y and Z). Then, attach it to the base of the arm by placing it in the direction of the arrow and rotating counter-clockwise (Diagram AA). Install the plush toy holders and hang the toys on them (Diagrams AB and AC). Attach the arm to one of the four sides using the frame's attachment mechanism (Diagram AD).

WARNING: To prevent the arm from falling on the child, ensure it is correctly attached to the frame and is stable!

Step 5: Wheel Lock

The cot has wheel locks. To lock the wheels, press the brake lever. To release the lock, lift the brake lever (Diagram AE).

Step 6: Adjusting the Base Height

The cot base is height-adjustable. To lower the base, release the zipper fastener and the zipper located inside the cot, along with the central floor (Diagrams AF and AG). In the next step, release the base straps and place the folded base into the cot (Diagrams AH and AI). WARNING: For safety, secure the straps under the base (Diagram AJ). When the base is at its lowest level, the side entrance can be used (Diagram AK).

Step 7: Toy Arm Operation

The toy arm is powered by batteries: 3 x AA (LR6) 1.5V (not included). To install/replace batteries, unscrew the battery compartment cover with a Phillips screwdriver. Replace batteries, ensuring correct polarity, and close the compartment cover.

The arm has several buttons with the following functions:

Button to turn on the light. The first press turns the light on, the second press reduces brightness. Pressing again turns the light off.
Button to start the carousel. Pressing the button repeatedly stops the carousel.
Pressing the button starts a series of soothing melodies with three volume levels. The fourth press turns off the melodies.
Button to start the vibration function with three intensity levels. The fourth press turns the function off.

Maintenance and Cleaning

Cot and folding floor fabric: Clean with mild soap and water. Never use abrasive cleaners, ammonia-based cleaners, bleach, or alcohol-based cleaners. Ensure the cot is completely dry before use or storage.
Changing table: Clean with mild soap and water. Never use abrasive cleaners, ammonia-based cleaners, bleach, or alcohol-based cleaners. Allow to dry.
Toy arch: Wipe with a damp cloth and mild soap. Do not immerse in water.
Toys: Hand wash max. 40°C, no bleach, no tumble dry, no ironing, no dry cleaning.
Frame: Clean the metal frame with a soft, clean, damp cloth and mild soap.

Disposal of Used Equipment

The crossed-out wheelie bin symbol ?️ on the device, packaging, or accompanying documents means the product must not be disposed of with other waste. Users are responsible for taking used equipment to designated collection points for proper recycling. Information on available WEEE (Waste Electrical and Electronic Equipment) collection systems can be obtained from the point of sale or municipal/community office. Every household contributes to potential waste generation, as the device contains hazardous substances, mixtures, and components. On the other hand, used equipment is also valuable material from which raw materials such as copper, tin, glass, iron, and others can be recovered. Proper handling of your old equipment prevents negative impacts on the environment and human health.

	Kinderkraft BEA Co-Sleeper User Manual User manual for the Kinderkraft BEA Co-Sleeper, covering assembly, safety guidelines, usage instructions, and maintenance tips to ensure a secure and comfortable experience for your baby.
	Kinderkraft Neste Grow Co-Sleeper User Manual Comprehensive user manual for the Kinderkraft Neste Grow Co-Sleeper, detailing safety instructions, assembly, and usage guidelines. Learn how to properly set up and use your baby cot for a safe and comfortable experience.
	Kinderkraft LOVI Travel Cot/Cradle User Manual Comprehensive user manual for the Kinderkraft LOVI travel cot and cradle, detailing assembly, safety instructions, maintenance, and features for optimal use and child comfort.
	Kinderkraft Neste Up Co-Sleeper: User Manual and Assembly Guide Official user manual and assembly guide for the Kinderkraft Neste Up co-sleeper. Learn about its features, safety, setup, and maintenance. Includes multi-language support and compliance with EN 16890:2017+A1:2021.
	Kinderkraft NESTE UP2 User Guide User guide for the Kinderkraft NESTE UP2 co-sleeper, providing essential safety precautions and assembly instructions.
	Kinderkraft MINI DOT User Manual and Guide Comprehensive user manual for the Kinderkraft MINI DOT stroller. Includes assembly, usage, safety, and maintenance instructions for optimal performance and child safety.
	Kinderkraft INDY/INDY² Stroller User Manual Comprehensive user manual for the Kinderkraft INDY/INDY² strollers, detailing assembly, usage, safety guidelines, maintenance, and warranty information for safe and comfortable child transport.
	Kinderkraft TULSY User Guide: Assembly and Safety Instructions Detailed user guide for the Kinderkraft TULSY baby bouncer, covering assembly, operation, and safety. Essential reading for parents.