H3C
User Manual for H3C models including: GW-CRPS800 800W redundant power server power supply, GW-CRPS800 800W, Redundant Power Server Power Supply, Server Power Supply, Power Supply, Supply
3-2 2 Key features Protection The power supply ps protection against rovide , input undervoltage, input overcurrentoutput overvoltage, output overcurrent, output short circuit, and overtemperature conditions.
File Info : application/pdf, 6 Pages, 227.82KB
DocumentDocumentH3C GW-CRPS800B Power Supply Manual New H3C Technologies Co., Ltd. http://www.h3c.com Document version: 6W100-20210624 Copyright © 2021, New H3C Technologies Co., Ltd. and its licensors All rights reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of New H3C Technologies Co., Ltd. Trademarks Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this document are the property of their respective owners. Notice The information in this document is subject to change without notice. All contents in this document, including statements, information, and recommendations, are believed to be accurate, but they are presented without warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions contained herein. Environmental protection This product has been designed to comply with the environmental protection requirements. The storage, use, and disposal of this product must meet the applicable national laws and regulations. Contents 1 About the GW-CRPS800B power supply ················································· 1-1 2 Key features ···························································································· 2-2 Protection ························································································································································2-2 Redundancy ····················································································································································2-2 Hot swapping ··················································································································································2-2 Tool-free replacement ·····································································································································2-2 3 Technical specifications ··········································································· 3-2 4 LEDs········································································································ 4-3 5 Installing and removing the power supply ················································ 5-3 i 1 About the GW-CRPS800B power supply IMPORTANT: · The information in this document might differ from your product if it contains custom configuration options or features. · The figures in this document are for illustration only. · The model name of a hardware option in this document might differ slightly from its model name label. A model name label might add a prefix or suffix to the hardware-coded model name. For example, the GW-CRPS800B power supply model represents power supply labels including GW-CRPS800B-M, which has a different suffix. The GW-CRPS800B is an AC input or high-voltage DC input and DC output power supply. It provides a maximum rated output of 800 W. Figure1-1 GW-CRPS800B power supply Figure1-2 Front panel (1) LED (3) Power receptacle (2) Latch (4) Handle 1-1 2 Key features Protection The power supply provides protection against input overcurrent, input undervoltage, output overvoltage, output overcurrent, output short circuit, and overtemperature conditions. Redundancy Multiple power supplies can be connected in parallel to achieve N+1 or N+N redundancy and load balancing. Hot swapping You can install or remove a power supply when the device is operating. Tool-free replacement You can replace a power supply without using tools. 3 Technical specifications Table3-1 Technical specifications Item Model Rated input voltage range Maximum rated input current Maximum rated output power Efficiency at 50 % load Temperature Operating humidity Maximum altitude Redundancy Cold backup Specifications GW-CRPS800B · 100 VAC to 240 VAC @ 800 W · 192 VDC to 288 VDC (240 HVDC power source) @ 800 W · 10 A @ 100 VAC to 240 VAC · 5 A @ 240 VDC 800 W 80 Plus Platinum · Operating: 0°C to 55°C (32°F to 131°F) · Storage: 40°C to +70°C (40°F to +158°F) 5% to 85% 5000 m (16404.20 ft) Yes Yes 3-2 4 LEDs Table4-1 LED description LED status Steady green Flashing green (1 Hz) Flashing green (0.33 Hz) Flashing green (2 Hz) Steady amber Flashing amber (1 Hz) Off Description The power supply is operating correctly. Power is being input correctly but the system is not powered on. The power supply is in standby state and is not outputting power. The power supply is updating its firmware. · The power supply is faulty. · The power supply is not receiving power, but the other power supply is receiving power. An alarm has occurred on the power supply. The power supply is not receiving power. Either or both of the following conditions might exist: · Power cord connection failure. · Power source shutdown. 5 Installing and removing the power supply For information about installing and removing the power supply, see the user guide for the device. 5-3