Instructions for bouncepad models including: CF-B4-TA9P-MX Counter Flex Tablet Security Enclosure, CF-B4-TA9P-MX, Counter Flex Tablet Security Enclosure, Tablet Security Enclosure, Security Enclosure, Enclosure

Bouncepad Counter Flex tablet security enclosure 27.9 cm (11") Black Bouncepad CF-B4-TA9P-MX user manual (1.7 MB)

Bouncepad CF-B4-TA9P-MX

Bouncepad Counter Flex tablet security enclosure Bouncepad CF-B4-TA9-MN user manual (1.7 MB)

Bouncepad CF-B4-TA9-MN

Bouncepad Counter 60 | Samsung Galaxy Tab A6 10.1 (2016) | Black | Covered Front Camera and Home Button | Bouncepad CF-W1-TA9P-MX user manual (1.7 MB)

Bouncepad CF-W1-TA9P-MX

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 1.66MB

Document Document

Counter Flex
Assembly Instructions Tools Required:
Socket Driver
Sheet Code: BP-IM-039_REV3 Release Date: 18/10/2023 Copyright 2016 Spotspot Ltd. (T/A Bouncepad) all rights reserved. Confidential, no part of this publication may be reproduced or transmitted in any form without the written permission of the copyright holder.

Tablet Set-up Kit Fixings Kit Faceplate

`Mounting Arm Box' includes: 1x T20 Pin
Torx Driver Bit
4x M4 Split Washer

Flex Mounting Arm Pair of Keys

Case

4x M4x20mm Buttonhead
screw

1x Case Washer

Freestanding Base

`Freestanding Base Box' includes: 4x M4x12mm Buttonhead screw
4x M4 Split Washer

In the Box

Fixings List
* Due to the modular nature of our product range you may receive additional fixings in the fixings kit

Tighten screw(s) using hand tools, using electric tools may damage your Bouncepad.
M4 Split Washer M4x12mm Buttonhead screw
T20 Pin Torx Driver Bit
Locate & secure the Flex
1 Mounting Arm to the Freestanding Base.

4x Tablet Supports 1x Cable Clip

4x Corner Pieces

Tighten screw(s) using hand tools, using electric tools may damage your Bouncepad.

T20 Pin Torx Driver Bit
M4x20mm Buttonhead
screw

M4 Split Washer Case Washer

Attach the Bouncepad Case to its
2 Mounting Arm. Take care to ensure correct & full thread engagement.

Unlock & remove the
3 Faceplate from the Bouncepad Case.

4 Install the Tablet Setup Kit. Each kit is specific per tablet device and Bouncepad Case.

Key number here

*We recommend recording the key number so you can purchase additional keys in the future.

Feed the tablet cable
5 through the Bouncepad Case & mounting arm

Place the tablet into the
6 Case and connect to power.

Locate and lock the
6 Faceplate onto the Bouncepad Case.

7 Installation is now complete.