Installation Guide for rock space models including: RSD0613, AC2100 Tri Band Whole Home Mesh WiFi System, RSD0613 AC2100 Tri Band Whole Home Mesh WiFi System
Support – rockspace
AC2100 Tri-Band Mesh Wi-Fi System – rockspace
SG :: Rockspace RSD0613 Mesh Wireless
File Info : application/pdf, 14 Pages, 5.00MB
DocumentDocumentQuick Installation Guide
AC2100 Tri-band Whole Home Mesh Wi-Fi System
Model No. RSD0613 (3-pack)
24hour Online After-sales Service
Scan QR Code To Visit https://rockspaceworld.com
Email: techsupport@rockspace.cc Tel: +1 (833) 816-6558 Service Time: EST 10:00 - 21:00 from Monday to Friday
In the box
Mesh node x 3 Power adapter x 3
Ethernet cable x 1 Quick Installation Guide x 1
Get to know your device
10/100/1000Mbps LAN ports
10/100/1000Mbps WAN/LAN port
DC power jack
Reset button
Power DC-IN
Mesh
Download the RS WiFi app
Download the RS WiFi app to your mobile device from App Store / Google Play, or by scanning the QR code below.
RS WiFi
Connect the primary node
* The first Mesh box you set up functions as the primary node, while the rest are referred to as the secondary nodes.
Modem
Or Ethernet jack
1. Plug one of the nodes (note: this is your primary node) into an outlet using the included power adapter. The LED indicator turns solid green. 2. Connect one end of the included Ethernet cable to the LAN port of your modem and the other end to the WAN/LAN port of the primary node. The indicator light will be solid green, indicating the system is ready for setup.
Set up the primary node
1. Open the Wi-Fi menu on your smart device. Select the primary node's SSID (network name) to connect. Note: The default SSID and password are labeled on the bottom of the node.
LAN1
LAN2
WAN/LAN
Power DC-IN
www.rockspace.hk Made in China
AC2100 Tri-band Whole Home Mesh WiFi System
Model: RSD0613 Power: 12V 1.5A FCC ID: V7TMESH12 IC: 9034A-MESH12 MAC: SN:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
2. Go to your mobile and open the RS WiFi app. The setup wizard appears. Tap Setup.
3. The app detects your connection type automatically. If your connection type is dynamic IP, tap Next. If it is PPPoE, enter your PPPoE username and password and tap Next. If it is static IP, enter your IP address and other information your ISP provides, and tap Next.
4. Create your Wi-Fi Name and Password. Tap OK. Note: Your mobile phone will disconnect from the original mesh Wi-Fi network. Please reconnect to the new wireless network. 5. You have set up the primary node successfully.
Connect the secondary nodes
1. Choose a proper place. - Place it out in the open and don't put it on the floor. - Keep your nodes away from electronic interference, such as microwaves,
TVs, refrigerators, etc.
2. Connect the nodes.
Method 1: Power on the other two nodes, they will automatically be added to the mesh network. The LED indicator will turn into solid green. If method 1 fails, try method 2.
Method 2: On the RS WiFi app, tap Settings > Add rock space mesh, scan the QR code on the back of the node to add.
After setup, you can use the LED indicator to determine an ideal location to place your node.
Solid green Solid yellow Solid red
Good connection Fair connection Disconnected
If the LED Indicator of a node is not solid green, relocate it to get a better connection.
To access the internet with: - Wired devices: Connect wired devices to the LAN ports of any node. - Wireless devices: Connect wireless devices to the Wi-Fi network using
the Wi-Fi name and password you set. If you want to manage your network, go to the RS WiFi app to control it anytime and anywhere.
FAQ
Q1: How can I connect my devices, such as a home security camera or printer, to the 2.4 GHz signal? Run the RS WiFi app, tap Settings > Smart Assistant > Enable. The mesh system will switch to the 2.4 GHz band in the following 30 minutes. After half an hour, the connection would be automatically terminated and switch back to the 5 GHz band, while your 2.4 GHz devices will still be connected to the 2.4 GHz band. Note: Make sure your smartphone is connected to the mesh's network and check if the app has been updated to the latest version.
Q2: How can I change my network name (SSID) and password? Run the RS WiFi app, tap Settings > Wireless Settings, change your SSID and password, and tap Save. Then, reconnect your devices to the Internet using the new SSID and password.
Q3: How can I remove a node from my mesh Wi-Fi network? Tap the node on the RS WiFi app, tap "..." in the upper-right corner, and choose Delete. Note that removing a node restores it to factory settings.
Q4: Can I add another new set of nodes to expand my network coverage? Yes. Run the RS WiFi app, tap Settings > Add rock space mesh, and scan the QR code on the back of the node to add.
Q5: How to restore my device to factory settings? With the nodes powered on, hold the Rest button of your primary node using a paper clip for about 6 seconds, release when the LED indicator blinks fast. And all nodes are restored to factory settings.
Q6: How to enable WPS on my rock space device? Run the RS WiFi app, tap Settings > WPS. The LED indicator blinks green slowly. Try to finish your connection within 2 minutes.
Q7: How to set AP mode? Step 1: Run the RS WiFi app. Go to Settings > Internet Settings > Connection Type. Select Bridge and tap Save. Wait a few minutes, the app will reconnect to the network. Step 2: Power on the other two nodes, the LED blinks green. Your network is established when LED turns to solid green.
If you need further help, please contact us at techsupport@rockspace.cc for more support.
LED indicator description
After a node is powered on, the LED indicator lights solid green for about 40 seconds to complete startup. Then, the LED indicator lights one of the following colors:
Node Type Primary node
Secondary node
Status Fast blinking green Solid green Solid red
Slow blinking green
Fast blinking green Solid green Solid yellow Solid red
Description Connecting to the Internet Connected to the Internet Disconnected Connecting to or searching for another node Connecting to the Internet Good connection Fair connection Disconnected
For EU/EFTA, this product can be used in the following countries:
BE
BG
CZ
DK
DE
EE
IE
EL
ES
FR
HR
IT
CY
LV
LT
LU
HU
MT
NL
AT
PL
PT
RO
SI
SK
FI
SE
UK
Shenzhen Renqing Excellent Technology Co., Ltd. Address: 104, No.15, Longfu Industrial Zone, Huarong Road, Tongsheng Community, Dalang Street, Longhua District, Shenzhen, China Email: techsupport@rockspace.cc Website: www.rockspace.cc Technical Phone Support: +1(833)816-6558 Service Time: EST: 9:00-17:00 / PDT: 06:00-14:00,from Monday to Friday 24hour Online After-sales Service: https: //rockspace. afterservice. vip
*NOTE: Please go to the rock space official website to download specific using instructions. www.rockspacewifi.com
rockspace Official: re.rockspace.local Extender Setup
rock space Official | Cutting Machine | Plotter | Film Cutting Machine | Screen Protector Cutter | On-demand Cut | Custom
rockspace Official: re.rockspace.local Extender Setup
rockspace Official: re.rockspace.local Extender Setup