GoLabel Thermal Printer Quick Start Guide

Introduction

GoLabel is a wireless label printer designed to work with a tablet running GoOps or SubOps. GoLabel simplifies your food prepping and labeling procedures. This Quick Start Guide will help you familiarize yourself with GoLabel before you get started.

Watch our "Quick Start" video: www.zippyyum.com/golabelsetup or scan the QR code.

[QR code for video]

Contact Zippy Yum: (888) 636-7557 | support@zippyyum.com | www.zippyyum.com

Setup

1. Open GoLabel's cover and remove any packaging material and the labels from inside. If the first label has tape on it, remove the tape.

2. Place the roll of labels directly into the printer so the labels feed from the top.

   [Diagram: Label roll being inserted into the printer.]

3. Push the roll of labels to the left so the left side of the roll is flush with the left side of the printer.

   [Diagram: Label roll positioned left, showing no gap on the left side.]

4. Feed the first label through the label feed guides, making sure the labels are aligned on the left side of the printer.

   [Diagram: Label being fed through guides, aligned left.]

5. If the label is loose in the feed guides, ensure the label feed guides are adjusted to the width of the label by moving the right guide, keeping the left edge of the labels aligned with the left side of the printer.

   [Diagram: Close-up of feed guides, showing right guide adjustment.]

6. Feed the first label through so it is slightly sticking out of the printer. Then close, plug in, and turn on your GoLabel.

   [Diagram: Printer plugged in and powered on, with label slightly extended.]

7. Download and install the GoOps or SubOps app on a compatible tablet.

   [Diagram: QR codes for GoOps and SubOps apps.]

8. Enter your credentials, log into the app, and follow the on-screen Quick Start Guide to pair your GoLabel and set up the app.

   [Description: App login screen with fields for Restaurant #, Password, and a 'Sign In' button.]

Getting to Know Your GoLabel Hardware

Identify the components of your GoLabel printer:

• 1. Cover Release Button: Used to open the printer cover.
• 2. Connection Indicator: Shows the printer's connection status.
• 3. Error Indicator: Lights up to indicate an error.
• 4. Pause Button: Temporarily stops printing.
• 5. Feed Button: Advances the label.
• 6. Power Button: Turns the printer on or off.
• 7. Label Roll Bucket: Holds the label roll.
• 8. Left Feed Guide: Guides the left edge of the label.
• 9. Right Feed Guide: Guides the right edge of the label and is adjustable.

[Diagrams: Top view of printer showing buttons, rear view showing ports, internal view showing label roll and guides.]

Regulatory Information

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

ISED Statement

English: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).

French: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. L'appareil numérique du ciem conforme canadien peut - 3 (b) / nmb - 3 (b).

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

Cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 2.5 du cnr - 102 et conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur l'exposition aux champs rf et la conformité.

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Cet équipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.

HVIN: GL2120TH

Printing Labels

The number on the printer shows how many labels will be printed. After printing a label(s), the number will turn grey and reset to 1.

[Description: Screenshot of the 'Prepping & Printing Labels' app interface.]

Changing the number in the containers or quantity box will make the icon green again, indicating the new number of labels to print.

This icon [Icon: Printer with checkmark] indicates the item does not need a printed label. Just tap to mark it as completed.