Puig Hi-Tech Parts: Windscreens, accessories and tuning for your bike - Puig Hi-Tech Parts
Puig Hi-Tech Parts: Windscreens, accessories and tuning for your bike - Puig Hi-Tech Parts
rrDisseny
Installation Guide for Puig models including: SUZUKI GSX-8S 23 Rear Fenders for motorcycle, SUZUKI GSX-8S 23, Rear Fenders for motorcycle, Fenders for motorcycle, motorcycle
Puig Rear Mudguard Suzuki GSX-8S / GSX-8R 2023-2024 - Cycle Gear
Puig Rear Mudguard Suzuki GSX-8S / GSX-8R 2023-2024 | 5% ($7.56) Off! - RevZilla
TO ADJUST THE POSITION OF THE MUDGUARD ON THE WHEEL,. LOOSEN THE ID-6 SCREWS AND RAISE/ LOWER THE POSITION OF THE ID-3 NUTS. 3. SUZUKI GSX-8S '23- / GSX-8R '24
File Info : application/pdf, 4 Pages, 2.88MB
DocumentDocumentwww.puig.tv www.puigusa.com info@puig.tv info@puigusa.com SUZUKI GSX-8S '23- / GSX-8R `24- MOUNTING RE F 21469769 INSTRUCTIONS ZR-ERAARC IMNUGDSGCURAEREDN 1 Person 30 min EASY FIX Nº 8 ALLEN Nº 4 Nº 5 ID. PIEZA/PART DESCRIPCIÓN 1 Guardabarros DESCRIPTION Rear mudguard QTY. REF.: 1 21699J/CM3 2 Soporte Support 3 Tuerca enjaulada de aluminio M6 M6 cage nut 4 Silentblock Ø18x Ø9 xØ11 x8 Ø18x Ø9 xØ11 x8 silentblock 5 Casquillo con valona Ø15 xØ9 x7,5 Ø15 xØ9 x7,5 bush with flange 6 Tornillo allen M6x20 Ø14 ISO7380 M6x20 Ø14 ISO7380 Allen screw 7 Tornillo allen M6x16 Ø14 ISO7380 M6x16 Ø14 ISO7380 Allen screw 8 Tapón tornillo M6 M6 screw cap *Algunos componentes se suministran montados. Some components are supplied assembled. Pg. 1/4 1 SOPOR1P4--21699 2 TUERCAJFM6--716 4 SILENBGONE--064 4 CASQUI-1A---324 4 TORNI-I7380-404 2 TORNI-I7380-403 4 TAPON--------86 V1.03/24 Created by: www.rrdisseny.cat www.puig.tv www.puigusa.com info@puig.tv info@puigusa.com SUZUKI GSX-8S '23- / GSX-8R `24- INSTRUCCIONES DE MONTAJE - MOUNTING INSTRUCTIONS - MONTAGEANLEITUNG 1 DISASSEMBLY DESMONTAJE RIGHT SIDE 2 ASSEMBLY MONTAJE RIGHT SIDE 7 Par de apriete - 7 Nm Tightening torque - 7 Nm 7 3 2 7 3 SI ES NECESARIO, PARA REGULAR LA POSICIÓN DEL GUARDABARROS SOBRE LA RUEDA, AJUSTAR LA POSICIÓN DEL SOPORTE ID2. IF NECESSARY, TO ADJUST THE POSITION OF THE MUDGUARD ON THE WHEEL, ADJUST THE POSITION OF THE ID2 SUPPORT. Pg. 2/4 V1.03/24 Created by: www.rrdisseny.cat www.puig.tv www.puigusa.com info@puig.tv info@puigusa.com SUZUKI GSX-8S '23- / GSX-8R `24- INSTRUCCIONES DE MONTAJE - MOUNTING INSTRUCTIONS - MONTAGEANLEITUNG 3 ASSEMBLY MONTAJE PUIG MUDGUARD PRE-ASSEMBLY 1 1 5 4 4 5 5 4 LEFT SIDE 4 DISASSEMBLY DESMONTAJE LEFT SIDE 5 4 RIGHT SIDE Pg. 3/4 V1.03/24 Created by: www.rrdisseny.cat www.puig.tv www.puigusa.com info@puig.tv info@puigusa.com SUZUKI GSX-8S '23- / GSX-8R `24- INSTRUCCIONES DE MONTAJE - MOUNTING INSTRUCTIONS - MONTAGEANLEITUNG 5 ASSEMBLY MONTAJE 1 LEFT SIDE 6 8 6 Par de apriete - 5 Nm Tightening torque - 5 Nm 6 ASSEMBLY MONTAJE RIGHT SIDE 6 Par de apriete - 5 Nm Tightening torque - 5 Nm 6 8 68 3 68 PARA REGULAR LA POSICIÓN DEL GUARDABARROS SOBRE LA RUEDA, AFLOJAR LOS TORNILLOS ID6 Y SUBIR/BAJAR LA POSICIÓN DE LAS TUERCAS ID3 TO ADJUST THE POSITION OF THE MUDGUARD ON THE WHEEL, LOOSEN THE ID-6 SCREWS AND RAISE/ LOWER THE POSITION OF THE ID-3 NUTS. Pg. 4/4 V1.03/24 Created by: www.rrdisseny.cat