Get Started
Step 1: Attach the power cord
Attach the power cord to the PAP machine.
Refer to User Guide page 4.
[Image description: Hands connecting a power cord to the PAP machine.]
Step 2: Remove the water tank
Remove the water tank from the PAP machine.
Refer to User Guide page 4.
[Image description: Hands detaching the water tank from the PAP machine.]
Step 3: Fill tank with water
Remove the lid and fill the tank with water.
Refer to User Guide page 4.
[Image description: Hands removing the lid from the water tank and filling it with water.]
Step 4: Reattach the water tank
Reattach the water tank to the PAP machine.
Refer to User Guide page 4.
[Image description: Hands reattaching the water tank to the PAP machine.]
Step 5: Connect tubing
Connect tubing to the PAP machine.
Refer to User Guide page 4.
[Image description: Hands connecting tubing to the PAP machine.]
Step 6: Start therapy
Press the Therapy button to start.
Refer to User Guide page 4.
[Image description: A finger pressing the therapy start button on the PAP machine.]
Step 7: Fit your mask
Fit your mask according to your doctor's prescription. If you received a mask with multiple cushions, follow the manufacturer's instructions. The attached cushion is typically a standard size. If the mask leaks or feels uncomfortable, try a different size cushion. For sizing help, use the Fitting Template or manufacturer's instructions.
Refer to User Guide pages 5-8.
Visuals show three types of masks: Nasal Mask, Nasal Pillow Mask, Full Face Mask.
Step 8: Put on your mask
Put on your mask.
Refer to User Guide pages 5-8.
Step 9: Attach tubing to machine
Attach the tubing to the PAP machine.
Refer to User Guide pages 9-10.
[Image description: Tubing being connected to the PAP machine.]
Step 10: Attach tubing to mask
Attach the tubing to your mask.
Refer to User Guide pages 9-10.
Step 11: Begin therapy
Lie down and take four deep breaths. The machine should start automatically. If not, press the Therapy button. Relax and breathe slowly through your nose.
Refer to User Guide page 11.
Step 12: Check for air leaks
Check for air leaks. Small leaks are acceptable. For large leaks, consult your Apria Sleep Therapy User Guide.
Refer to User Guide pages 11-12.
Step 13: Setup complete
Your setup is complete. You are now ready to begin your PAP therapy!
Refer to User Guide page 13.
Step 14: Cleaning and maintenance
Follow the cleaning and maintenance instructions and review the recommended supply replacement schedule.
Refer to User Guide pages 16-17.
