TP-Link Omada Hardware Controller Installation Guide

1. Package Contents

The package contents include the Omada Hardware Controller (OC200 or OC300), Ethernet Cable, and Mounting Brackets/Feet (for OC300).

2. Hardware Overview

Front Panel of OC300/OC200

Cloud LED: Indicates cloud connectivity status (On: bound to TP-Link ID, Slow Flashing: connected but not bound, Quick Flashing: resetting, Off: disconnected).

Power LED: Indicates operational status (On: working normally, Off: working abnormally).

1000M (OC300): Indicates Ethernet speed (On: 1000 Mbps, Off: 10/100 Mbps).

Link/Act: Indicates link status and data activity (On: linked, no activity; Flashing: transmitting/receiving data; Off: no link).

Ethernet Ports (OC300) / ETH2 Port (OC200): Used for data transmission.

ETH1 (PoE IN) Port (OC200): Connects to an 802.3af/at PoE device for data and power.

USB 2.0/3.0 Port: Connects to a storage device for configuration backup. For OC200, this port is active when powered by PoE.

Reset Button: Press and hold for 5s to reset to factory defaults.

Rear Panel of OC300

Kensington Security Slot: For anti-theft security locks.

Grounding Terminal: For lightning protection and grounding.

Power Socket: Connects to the power cord (100-240V~50/60Hz).

Rear Panel of OC200

Kensington Security Slot: For anti-theft security locks.

Micro USB: Connects to a 5VDC, 1A minimum USB power source.

3. Installation

Desktop Installation

1. Place the device on a flat surface.
2. Attach the supplied rubber feet to the bottom corners of the device.

Rack Installation (OC300 only)

1. Ensure the rack is grounded and stable.
2. Secure the supplied rack-mounting brackets to the sides of the device using screws.
3. Use suitable screws to secure the brackets to the rack.

Connection Methods

For OC200 via Standard PoE Device: Connect an Ethernet cable from the ETH1 (PoE IN) port to a standard 802.3af/at PoE device (e.g., TP-Link PoE switch). Ensure the power supply meets IEC 62368-1 requirements.

For OC200 via USB Power Source: Connect a USB cable from the micro USB port to a 5VDC, 1A minimum USB power source.

For OC300: Connect the provided power cord to the power socket and a power outlet.

Grounding: The device has lightning protection. Grounding can also be achieved via the AC cord's PE cable or a separate ground cable.

Security: Use a Kensington lock (not provided) in the security slot to prevent theft.

4. Power On

The Cloud LED will flash three times upon successful initialization.

5. Typical Network Topology

A DHCP server is required to assign IP addresses to the EAPs and the Omada Hardware Controller in the local network. The topology typically involves a router, a PoE switch, and various Omada access points managed by the controller.

6. Software Configurations

The Omada Hardware Controller supports two management options: Remote Management and Local Management.

Remote Management

Via Omada App: Download the Omada app, log in with your TP-Link ID, and add the controller via Cloud Access. Follow the on-screen instructions.

Via Web Browser: Access https://omada.tplinkcloud.com, log in with your TP-Link ID, add the controller, and complete the configuration wizard.

Local Management

Via Omada App: Download the Omada app, ensure your mobile device and controller are on the same subnet, and add the controller via Local Access. Follow the on-screen instructions.

Via Web Browser: Ensure your management device and controller are on the same subnet. Find the controller's IP address (default fallback is 192.168.0.253) and access it via a web browser. Complete the configuration wizard.

Community and Support

Join the TP-Link Community at https://community.tp-link.com/business for questions and discussions.

Find technical support, user guides, and more information at https://www.tp-link.com/support/?type=smb.

Setup videos are available by scanning the QR code or visiting https://www.tp-link.com/support/setup-video/?type=smb.

Declarations of Conformity

TP-Link declares compliance with essential requirements of EU directives (2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU, (EU)2015/863) and UK regulations (Electromagnetic Compatibility Regulations 2016, Electrical Equipment (Safety) Regulations 2016). EU and UK Declarations of Conformity can be found at TP-Link's website.

Safety Information

• Keep the device away from water, fire, humidity, and hot environments.
• Do not attempt to disassemble, repair, or modify the device. Contact TP-Link for service.
• The power cord's plug is the disconnect device; ensure the socket-outlet is easily accessible.