EN: FLYING FAIRY – USER MANUAL

WHAT'S IN THE PACKAGE

• Flying fairy 1x
• USB charger 1x

TECHNICAL SPECIFICATIONS

• Material: ABS plastic
• Movement direction: Up and down
• Charging: Via USB power cable
• Charging time: Approximately 25 minutes
• Flight time: 8-10 minutes
• Dimensions: 17 x 6 x 21 cm
• Color: Pink

WARNINGS

• Not suitable for children under 36 months.
• The toy should be used under adult supervision.
• Be cautious of potential sharp points at the end of wings. Keep wings at a safe distance from eyes to avoid injury.
• Avoid danger and do not touch the wings when they are spinning at high speed.
• Keep the toy at a safe distance and away from faces and eyes.
• Do not operate the toy near people or animals unfamiliar with how the toy works.
• Keep the toy away from fire and water.
• Do not release the toy near cars, people, pets, overhead wires, bodies of water, buildings, trees, and high-voltage power lines.
• Keep fingers, hair, and loose clothing away from rotating wings.
• Never insert foreign objects into rotating parts such as wings.
• Do not touch the wings while the flying fairy is in operation.
• Do not attempt to catch the fairy while it is flying.
• Charge the flying fairy exclusively with the provided USB charging cable.
• Before handing the toy to children, ensure that all packaging is removed.
• Do not bend the fairy's wings, as it will affect its operation.
• When not in use, always disconnect the fairy from the power source.
• After about 5 minutes of flight, the fairy's speed will decrease, the battery will deplete, and the fairy will gradually descend and land on the ground. It's time to recharge it.
• Do not store the fairy near heat and direct sunlight.
• The flight time of the fairy may vary depending on how it is operated.
• Do not operate the toy in strong winds, as it may go out of control, leading to a high probability of a hard landing and potential damage to the toy.
• Release the toy straight into the air; otherwise, it may collide with objects around the room and land on the ground.

PRODUCT COMPONENTS

1. Rotors

2. Wings

3. Power switch

4. Charging port

5. Sensor

6. Air vent for the fan

NOTE: In the package, you will find two wings that need to be manually attached to the fairy!

Installation is simple – insert the pegs on the wings into the slots on the fairy's body.

OPERATION AND CONTROL

CHARGE THE TOY:

Connect the USB power cable to the toy on one end and insert the other end into a computer, power bank, or adapter (not included).

1. Hold the fairy vertically by the feet and turn on the switch.
2. Lights will illuminate, and 3 seconds later, the wings will start to spin. You can now release the fairy for takeoff. Always release the fairy vertically upward. The fairy will start flying at a low speed, gaining speed at a certain height after takeoff.
3. Control the fairy by placing your hand underneath it. The flying fairy can detect objects around it and move intelligently. After a certain distance, it will automatically descend; this is when you need to place your hand underneath it to lift it back into the air. When you place your hand under the fairy's feet, it will rise again. When you move your hand away, the fairy will land on the ground.
4. The flying fairy will automatically stop when it encounters an obstacle. If you want the fairy to take off again, turn it off and on again.

NOTES

• If you tilt the fairy to the side or upside down, the wings will stop spinning.
• When the fairy falls to the ground or hits an obstacle, the wings will stop spinning. This does not mean the fairy has turned off. To turn off the fairy, use the switch. Always turn off the fairy when the wings stop spinning.

CLEANING

Do not use a damp cloth for cleaning, and never submerge the toy in water. Use only a dry cloth to clean dust from the toy.

INSTRUCTIONS FOR RECYCLING AND DISPOSAL:

This label means that the product cannot be disposed of as other household waste throughout the EU. To prevent potential damage tothe environment or human health from uncontrolled waste disposal. Recycle responsibly to promote the sustainable use of material resources. If youwant to return a used device, use the drop-off and collection system, or contact the retailer from whom you bought the product. The retailer can accept the product for environmentally safe recycling.

A declaration by the manufacturer that the product complies with the requirements of the applicable EU Directives.