protocol.no
User Manual for Tengsay models including: 2BGF3-X21, 2BGF3X21, x21, X21 Magnetic Car Wireless Charger, X21, Magnetic Car Wireless Charger, Car Wireless Charger, Wireless Charger, Charger
Shenzhen Tengsay Technology Co., Ltd X21 Car Wireless Charger 2BGF3-X21 2BGF3X21 x21
File Info : application/pdf, 1 Pages, 4.60MB
DocumentDocumentProduct Introduction This car 15W wireless charging holder is an intelligent product, the product design is simple and safe, support Qi standard.Compatible with all wireless charging cell phones that support the QI standard protocol.No need to plug in the cable when charging your cell phone, providing you with a convenient and safe charging environment. Product Overview Charging Indicator Light Wireless charging area Operation Guide 1. Take out the air vent hook from inside the package Air vent hooks 2. After taking out the air outlet hook, align the mounting nut position and turn the nut to tighten the air outlet hook. 3. The assembled magnetic car wireless charging bracket, installed in the car air conditioning vent position to connect the USB cable, this time the indicator state for the blue light is on for 60 seconds after the off. 4. After powering up, when the phone is placed on it, it enters the wireless charging state. At this time the indicator light for the blue light breathing 60 seconds after the off. 5.When wireless charger is in abnormal working state,(detects other objiects or dysfunction)The status of the LED light is flashing blue. X21 Magnetic Car Wireless Charger User Manual FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. type-c input Remark:All data of this product came from laboratory tests,maybe a little bit different in actual using. Parameters Input9V 2A Ouput power15W Max Charging distance8mm Charging efficency76 Operation Frequency115kHz-179KHz Compatible Devices PhoneiPhone 12iPhone 12 miniiPhone 12 Pro iPhone 12 Pro maxiPhone 13iPhone 13 mini iPhone 13 ProiPhone 13 Pro maxiPhone 14 Pro iPhone 14 plusiPhone 14 ProiPhone 14 Pro max iPhone 15aiPhone 15 PlusaiPhone 15Pro iPhone15 Pro Max Note: Other phones that support wireless charging need to have a magnetic case or magnet ring. Package Includes 1 X Magnetic Car Wireless Charger 1 X Air vent hooks 1 X USB Cable 1 X User Manual Precautions 1.Support all QI-enable devices 2.If need fast charging,please use QC2.0 or above adaptor 3.All phone cases of metal or ring holder are not supported 4.please keep the product away from water or other liquid 5.Please power off before cleaning it