User Guide for ZFX models including: ZP-BHP-P Wireless Headphone, ZP-BHP-P, Wireless Headphone, Headphone
Shenzhen ZFX Technology CO.,Ltd BTP 2AMLDBTP 2AMLDBTP btp
Wireless Headphone ZP-BHP-P USER GUIDE ZFX PACKAGE INCLUDE 1. 01. RGB Headband LED 02. Adaptative Design headband 03. Soft Ear Cushion 04. RGB LED Earcup 05. USB-C charging cable 01 02 03 04 05 2 PRODUCT OVERVIEW 06. Volume +/Prev (one click for Volume+, Press and Hold for volume to Max, double click for previous songs) 07. Power ON/OFF Answer/Reject (Hold and press for 3s for Power ON/OFF, one click for RGB ON/OFF, When call coming, one cilick for Answer call, double click for reject call) 08. Volume -/Next (one click for Volume-, Press and Hold for volume to Min, double click for next songs) 09. USB-C charging port 10. LED indicator 11. 3.5mm input for wired use 12. Build-in Microphone 06 07 08 09 10 11 12 3 Operate A. How to answer and end incoming call 1.Answer call: click the Power button 2.Reject call: double click the Power button 3.End call: click the Power button 4.Just one of the headphones can answer the call, anthoer can't hear the voice of call B. Turn ON/OFF RGB light 1. Click the Power button to Turn ON/OFF RGB Light C. How to Share the Music 1.Select any headphone in the pack and connect it to the phone (Audio source device) via BT first, 2.Power on another headphone 3 The two headphones will automatically connect to the phone and share the music 4.If one of the headphones power off, the another headphone will continue to function normally 5.The two headphones of pack also can be working independently If two headphones want to connect different phone,the two headphones need keep the distance >20M) 4 CONNECT TO Devices Connect Headphone via Bluetooth: 1. Open Bluetooth connection on your phone 2. Power on the headphone 3. Search the Bluetooth device for BSBTH25WH and connect it 5 LED&BUZZER INDICATION Headphone LED status Blue LED ON Buzzer status / Blue LED OFF / Red LED flash one time every 3 sec Red LED lighting steadily Red LED OFF Low power / / Headphone Staus Bluetooth connected Power OFF Low power indication Headphone charging Headphone charging completed/no Charging Note: When the available ba ery power is lower than 20%, the RGB light will be forced off and cannot be turned on, which will help to extend the ba ery life. 6 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restrictionCorel PDF Engine Version 16.1.0.843 CorelDRAW X6