Installation Guide for enegic models including: Power Management For Your EV Charger, Management For Your EV Charger, Your EV Charger, EV Charger, Charger

Charge Amps integration guide

| Our downloadable Enegic content | Enegic.com - Perific

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 11 Pages, 8.21MB

Document Document

v1.3

TABLE OF CONTENTS

Power management for your EV charger
Integration guide - Charge Amps

English

1

Svenska

2

Français

3

Suomi

4

Deutsch

5

Español

6

Nederlandse

7

Norsk

8

Português

9

Danska

10

Enegic

Integration guide - Charge Amps
English
Before you start:
A Monitor must be installed and configured to measure total consumption. The Charge Amps charging box must be commissioned and linked to an installation on a user account with Charge Amps.
Follow these steps to integrate with Charge Amps
In the Enegic app, go to
1 Settings, Licenses.
 Scan the QR code on the included integration license.
Go to Settings,
2 Reporters and Add new Reporter.
Select Charge Amps
3 Charge Control as the type of reporter.
Enter an appropriate
4 name such as "Charge Amps charge control".

 Then press Get Serial Number and PIN
The serial number and
5 PIN that you generated should both be entered into Charge Amps Partner in the Measurement device that will be connected to the charging box.  

 my.charge.space/partner.
Enter main fuse size.
6

Ensure the correct
7 Enegic monitor is selected as total consumption measurement. 


Then press Save.

8

To do in Charge Amps Partner

 Create a new Measurement Device under the current user with the generated serial number and PIN from the Enegic reporter
m Create a new Load Balancer and connect to the current user. Add Measurement Device and charging box
j When all settings are made, the Measurement Device will be displayed with a status of ACTIVE indicating that the Charge Amps system has started receiving data from the Enegic reporter.

9

Charge control

Enegic Monitor is now integrated with 
 Charge Amps
The charging box(es) in the Charge Amps installation you have integrated with now retrieve power values 
from Enegic, which enables a safe and efficient power output.


In the overview in the app, you will now see that Charge Amps Charge Control has been created: From here you can control the charging boxes in the
facility by activating optiCharge.