Instruction Manual for JBC models including: SF280 Auto Solder Wire Handle, SF280, Auto Solder Wire Handle
SF280 - Auto Solder-Wire Handle
SF280 - Automatic Solder-Wire Handle
INSTRUCTION MANUAL SF280 Auto Solder-Wire Handle This manual corresponds to the following references: SF280-A Packing List The following items are included: Auto Solder-Wire Handle ........................................................................................................ 1 unit Manual ......................................................................................................................................................... 1 unit Ref. 0028093 2 Connections SF Auto Solder Wire Feeder Unit* Auto Solder-Wire Handle Ref. SF280-A GSF Guide Kits* availabe for different solder wire diameters Tool Assembly Connect the tool to the control unit following this steps: Insert and push the guide nozzle until the end (1) and tighten the screw (2). Connect the jack (3). Insert until the end 2 1 OK 3 * not included, sold separately 3 Guide Tube* Replacement Once the tool is disconnected from the control unit follow the instructions below: Disassemble the outlet nozzle (1) from the guide tube. Open the guide clamp (2), take off the guide tube (3) and insert the new one. Note: The guide tube length can be easily adjusted (4) when the guide clamp knob (2) is open. Once the guide tube length is adjusted close the guide clamp knob (2). Assemble the outlet nozzle (1) onto the guide tube tip. SF with Guide Tube assembled Guide Tube 4 1 Outlet Nozzle SF without Guide Tube assembled 3 Guide Tube 2 Guide Clamp Knob Enter en "Tool Settings" at the SF control unit main menu and select the proper wire diameter. * not included, sold separately 4 Main Menu 1 Reset settings 2 Station settings 3 Tool settings 4 Programs Settings Accessories* Guide Kits* Various guide kits are available. Choose the guide set according to solder wire diameter used. Solder Wire Ø 0.8 mm / 0.032 in 1.0 mm / 0.040 in 1.2 mm / 0.047 in 1.5 mm / 0.059 in 1.6 mm / 0.063 in Ref. with Solder Wire Perforation GSF08V-B GSF10V-B GSF12V-B GSF15V-B GSF16V-B Solder Wire Ø 0.4 mm / 0.016 in 0.5 mm / 0.020 in 0.6 mm / 0.025 in 0.7 - 0.8 mm / 0.028 - 0.032 in 0.9 - 1.0 mm / 0.035 - 0.040 in 1.1 - 1.2 mm / 0.043 - 0.047 in 1.3 - 1.5 mm / 0.051 - 0.059 in 1.6 mm / 0.063 in Ref. without Solder Wire Perforation GSF04D-B GSF05D-B GSF06D-B GSF08D-B GSF10D-B GSF12D-B GSF15D-B GSF16D-B Tool Stand* Stand for SF280 Auto Solder-Wire Handle Ref. SF-SE It prevents SF280 Solder Feed Handle from rolling away while working. * not included, sold separately 5 Notes 6 Notes 7 Specifications SF280 Auto Solder-Wire Handle Ref.: SF280-A - Suits for the following solder wire Ø: - Using Guide Sets with V-Cut: Ø 0.8 - 1.6 mm / Ø 0.03 - 0.06 in (see page 5) - Using Guide Sets without V-Cut: Ø 0,4 - 1,6 mm / Ø 0.02 - 0.06 in (see page 5) - Total Net Weight: - Total Package Dimensions/Weight: (L x W x H) 60 gr / 0.01 lb 235 x 40 x 40 mm / 170 g 9.25 x 1.57 x 1.57 in / 0.37 lb Complies with CE standards ESD safe Warranty JBC's 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased. This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility. 0028093-310522Adobe PDF Library 16.0.7 Adobe InDesign 17.2 (Windows)