ZTE MC888D 5G Indoor CPE
The ZTE MC888D is the flagship model of ZTE's third-generation 5G wireless router series. It supports the latest 5G NR Rel.16 technologies and offers Wi-Fi 6, dual gigabit network interfaces, and full-voice services. It integrates all indoor terminal functions required for 5G FWA (Fixed Wireless Access) service deployment, enabling users to experience 5G in AR, cloud gaming, and 4K video streaming.
Benefits
Ultra-high-speed Internet connection
With its compact single-chip architecture, the MC888D delivers exceptional performance-to-cost ratio. It boasts a 5G NR download rate of 2.716Gbps and a Wi-Fi 6 downlink rate of AX3600, providing ultra-high speeds and ultra-low latency for 5G networks.
High-gain antennas improve network coverage
The MC888D features directional antennas with up to 12dBi gain for medium and high frequency bands commonly used in 5G networks. Combined with intelligent antenna switching technology, it expands base station coverage and increases internet access rates in areas with medium and weak signal coverage by 10-36%.
Rich combinations to exploit the potential of spectrum
The MC888D supports global mainstream 3G/4G/5G frequency bands and combinations like NR CA and LOW+LOW band ENDC. This allows for efficient utilization of operators' existing spectrum resources, offering users high-speed, wide-coverage, and smooth-handover cellular network roaming.
Key Features
- 5G NR SA & NSA; 3GPP Rel.16, up to 2.716Gbps DL rate
- 12dBi high gain antenna for 5G high frequency bands
- Network Signal Detection and Position Suggestion
- VPN Client and VPN passthrough
- Wi-Fi 6 (11ax) AX3600 Wi-Fi auto Optimization
- Parental Control Time Management
- RJ11 Ports for VoLTE or VoIP
- Bridge Mode and Cable Broadband
- ZTE security and stable FOTA
Interface Description
The MC888D provides abundant management and configuration interfaces. It supports local configuration via WEBUI and mobile apps, and remote management using TR069 and MQTT protocols. This enhances user experience and offers cost-effective, efficient, and reliable solutions for FWA terminal deployment, firmware upgrades, and operations & maintenance (O&M).
LED Indicators
The device features LED indicators for Power, Wi-Fi, Network status, and WAN signal strength.
Ports
- PHONE Port (RJ11)
- WAN/LAN Port (RJ45)
- LAN2 Port (RJ45)
Specifications
Hardware specifications
- 5G NR Interface: 3GPP Release 16, supports NSA and SA modes. Frequencies: n1/2/3/5/7/8/12/20/28/38/40/41/66/71/75/77/78. 4 MIMO: n1/3/7/38/40/41/66/75/77/78.
- 4G LTE Interface: 3GPP DL Category 19, UL Category 18. Frequencies: B1/2/3/4/5/7/8/12/17/20/26/28/32/66/71/B34/38/39/40/41/42/43/48. 4 MIMO: B1/3/4/7/32/38/39/40/41/42/43/48/66.
- UMTS Interface: DC-HSDPA/HSPA+. Frequencies: B1/2/5/8.
- Maximum power consumption: Approximately 15W.
- Wi-Fi technology: Wi-Fi 6, 802.11b/g/n/a/ac/ax, 2.4G & 5G. MIMO: 5GHz 2MIMO, 2.4GHz 2MIMO. Speed: AX3600. Access number: up to 64.
- Antenna Gain: 5G/4G/3G: 700~960MHz: 1~1.5dbi; 1450~2700MHz: 2~2.5dbi; 3300~4200MHz: 5dBi and 12dBi.
Speed
- 5G ENDC (LTE FDD + Sub6G): DL 2.716Gbps, UL 280Mbps
- 5G SA: DL 1.716 Gbps, UL 160Mbps
- LTE FDD: DL 1.6Gbps, UL 200Mbps
- LTE TDD: DL 1.12Gbps, UL 40Mbps
Interface
- RJ45: 2 ports (10/100/1000Base-T)
- RJ11: 1 port
- USB: 1 port (TypeC, for debug only)
- SIM slot: 4FF/eSIM (default is SIM slot)
- Reset hole
- WPS button
LED
- Power: 1 LED (White)
- Wi-Fi: 1 LED (White)
- Network: 1 LED (White/Blue/Red)
- WAN signal strength: 3 LEDs (White)
- LAN: Standard RJ45 port LED
Package contents
- AC Adapter: 12V/1.5A
- Ethernet cable
- Quick Start Guide
Environment
- Operating temperature: -20 to 55°C
- Storage temperature: -40 to 70° C
- Humidity: 5% to 95%
Certification
- CE, WEEE, ROHS, REACH, Wi-Fi
Artwork
- Dimensions: 182*124*70mm
- Weight: about 650g
Software specifications
Device Mode
- Automatically mode (wireless or wire auto switch)
- Hybrid mode (wireless and wired used simultaneously)
- Wireless mode
- Bridge mode
- Cable Broadband Mode
IP Networking & Routing
- IPv4/IPv6 dual stack (NDP IPv6)
- DHCP server
- VPN client: L2TP, PPTP, IPSec, GRE
- VPN pass-through
- NAT/NAPT
- SIP ALG
- Multiple APNs
Firewall
- Port Forwarding
- Port Filtering
- Port Mapping
- Domain Filtering
- MAC address Filtering
- UPnP
- DMZ
- Remote Access/Ping switch
Wi-Fi
- Wi-Fi Switch
- Bandsteering
- Security mode: WPA-PSK/WPA2-PSK, WPA3-PSK, WPA2-PSK
- Wi-Fi Broadcast
- Wi-Fi Isolation
- Auto channel selection
- WPS
- GuestSSID support
- Wi-Fi Sleep Mode
Voice
- VoNR, VoLTE, VoIP, CSFB
Device Management
- Connected device Management
- SMS
- PIN/PUK management
- APN management
- Lock Frequency/Lock Cell
- Random WebUI & Wi-Fi management Password default
- TR069 with TR181 data model default
- Upgrade: FOTA / TR069
- ZTELink APP
- Device can FOTA/TR069/remotely access on bridge mode
Special Feature
- Preferred Position: Assists users in finding an optimal placement.
- Device Diagnosis: Lists all device running key statuses and provides solutions.
* Optional customized software features.
** The maximum data rates are theoretical values. Actual data rates depend on the network environment.
*** ZTE Lab test data.
For more product information, visit us on the web at https://ztedevices.com.
© ZTE. All rights reserved. No spreading without permission of ZTE. All specifications are subject to change without notice.