Each Part Name
- Sharp ceramic blade
- 5-position blade length adjustment
- Switch
- Charging Indicator
- Charger
- Type-c cable
- Guide combs: 3mm, 6mm, 9mm, 12mm, 15mm, 18mm
- Brush
- Oil
- Scissors
- Comb
Specifications & Charging
| Pet Grooming Clipper | Motor | Operating voltage: 5V Centering material: anti-wear brass |
| Battery | Type: 2000mAh Charge time: 3h Operating time: 3h |
|
| Specific Adapter | Input | 100V-240V~50/60Hz |
| Output | USB connect with adapter 5V=1A |
Plug-in Using Method
1. Insert the rechargeable batteries into the clipper and plug in the charging cable to start charging.
2. The red charge light indicates that charging has started.
3. The red charge light will change to green when the clipper is fully charged.
Adjusting Length Function
Guide Comb Trimming: Special long combs offer 6 kinds of length adjustments (3, 6, 9, 12, 15, 18mm) for crew cuts or side hair.
Blade Limit Regulator: Provides 5 kinds of length adjustments from 0.8mm to 2.0mm.
- Determine the need hair length.
- Select the appropriate guide comb.
- Fine-tune the blade using the regulator, adjusting from 0.8mm to 2.0mm by moving the button left or right.
Guide Comb Installation
Hold both sides of the guide comb and push it onto the clipper until the button positions click. Ensure the comb is securely attached and not loose.
Guide Comb Dismantle
Remove the guide comb by pressing the buttoned positions on both sides and then pulling the comb away.
Blade Removal & Installation
Blade Removal
- Press down the moving blade with your thumb and then remove the blade.
- Hold the blade with your other hand to prevent it from falling off.
Blade Installation
- Adjust the blade length regulator to 2.0mm before installing the blade.
- Direct the blade's slot (B) at the hair clipper's slot (A) and plug it in.
- Push the blade down until it clicks into place.
Cleaning & Maintenance
Blade Cleaning
1. Use the cleaning brush to clear up the blade.
2. The blade can be removed for cleaning.
Clean hair from between the moving blade and the fixed blade.
Blade Maintenance
Before or after use, maintain the blade by dripping some oil on the indicated red points.
Precautions For Use
- Do not disassemble the product. ❌
- The hair clipper cannot be washed. Please keep it away from wet conditions. ❌
- The product can only be cleaned by cloth with little water or mild soap solution.
- Do not charge the product in environments above 40°C or below 0°C. ❌
ℹ️ The product can produce slight heat during use or charging, which is normal.
⚠️ Please remove the battery safely and return it to the specified places when the battery runs out. Never discard it casually.
Contact Us
WE ARE READY TO HELP
Oneisall offers a standard 2-year warranty. If you have any issues with your Oneisall product, please do not hesitate to contact us. Be sure to include your proof of purchase, model number, and any relevant photos or videos in your message to expedite the process. Our Oneisall support team is available 7 days a week and will respond to your inquiry within 24 hours. Thank you for choosing Oneisall.
Please note that the Oneisall warranty does not apply to used products or purchases made from unauthorized sellers. It's important to be aware that the warranty also does not cover consumable parts such as blades, guards, filters, brushes, and similar items. These parts may require regular replacement or maintenance.
- Email: support@oneisall.com
- Phone: +1 877-522-8578 (US)
- Support Hours: Mon-Fri 8am-5pm (PST)
- Website: www.oneisall.com
Follow us: [Twitter] [TikTok] [Instagram] [YouTube] [Facebook] @Oneisall Official
[Guide video]
